diff --git a/board/freescale/mpc8569mds/bcsr.h b/board/freescale/mpc8569mds/bcsr.h
index c4738d734351cd199602517b1f31cb58bf4b6771..2ed57d8527384ab557476dc9d6bf9db30fa00cf2 100644
--- a/board/freescale/mpc8569mds/bcsr.h
+++ b/board/freescale/mpc8569mds/bcsr.h
@@ -33,7 +33,8 @@
 #define BCSR6_UPC1_POS_EN	0x40
 #define BCSR6_UPC1_ADDR_EN	0x20
 #define BCSR6_UPC1_DEV2		0x10
-#define BCSR6_SD_ENABLE         0x04
+#define BCSR6_SD_CARD_1BIT	0x08
+#define BCSR6_SD_CARD_4BITS	0x04
 #define BCSR6_TDM2G_EN		0x02
 #define BCSR6_UCC7_RMII_EN	0x01
 
diff --git a/board/freescale/mpc8569mds/mpc8569mds.c b/board/freescale/mpc8569mds/mpc8569mds.c
index cc8873117ef7411fa9a67dd4176c35bc34e46a1a..2d07922161bcf2276cc7f9b1bba23d496e13e398 100644
--- a/board/freescale/mpc8569mds/mpc8569mds.c
+++ b/board/freescale/mpc8569mds/mpc8569mds.c
@@ -23,6 +23,7 @@
  */
 
 #include <common.h>
+#include <hwconfig.h>
 #include <pci.h>
 #include <asm/processor.h>
 #include <asm/mmu.h>
@@ -35,6 +36,7 @@
 #include <ioports.h>
 #include <libfdt.h>
 #include <fdt_support.h>
+#include <fsl_esdhc.h>
 
 #include "bcsr.h"
 
@@ -303,6 +305,119 @@ local_bus_init(void)
 	out_be32(&lbc->lcrr, (u32)in_be32(&lbc->lcrr)| 0x00030000);
 }
 
+#ifdef CONFIG_FSL_ESDHC
+
+/*
+ * Because of an erratum in prototype boards it is impossible to use eSDHC
+ * without disabling UART0 (which makes it quite easy to 'brick' the board
+ * by simply issung 'setenv hwconfig esdhc', and not able to interact with
+ * U-Boot anylonger).
+ *
+ * So, but default we assume that the board is a prototype, which is a most
+ * safe assumption. There is no way to determine board revision from a
+ * register, so we use hwconfig.
+ */
+
+static int prototype_board(void)
+{
+	if (hwconfig_subarg("board", "rev", NULL))
+		return hwconfig_subarg_cmp("board", "rev", "prototype");
+	return 1;
+}
+
+static int esdhc_disables_uart0(void)
+{
+	return prototype_board() ||
+	       hwconfig_subarg_cmp("esdhc", "mode", "4-bits");
+}
+
+int board_mmc_init(bd_t *bd)
+{
+	struct ccsr_gur *gur = (struct ccsr_gur *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
+	u8 *bcsr = (u8 *)CONFIG_SYS_BCSR_BASE;
+	u8 bcsr6 = BCSR6_SD_CARD_1BIT;
+
+	if (!hwconfig("esdhc"))
+		return 0;
+
+	printf("Enabling eSDHC...\n"
+	       "  For eSDHC to function, I2C2 ");
+	if (esdhc_disables_uart0()) {
+		printf("and UART0 should be disabled.\n");
+		printf("  Redirecting stderr, stdout and stdin to UART1...\n");
+		console_assign(stderr, "eserial1");
+		console_assign(stdout, "eserial1");
+		console_assign(stdin, "eserial1");
+		printf("Switched to UART1 (initial log has been printed to "
+		       "UART0).\n");
+		bcsr6 |= BCSR6_SD_CARD_4BITS;
+	} else {
+		printf("should be disabled.\n");
+	}
+
+	/* Assign I2C2 signals to eSDHC. */
+	clrsetbits_be32(&gur->plppar1, PLPPAR1_I2C_BIT_MASK,
+				       PLPPAR1_ESDHC_VAL);
+	clrsetbits_be32(&gur->plpdir1, PLPDIR1_I2C_BIT_MASK,
+				       PLPDIR1_ESDHC_VAL);
+
+	/* Mux I2C2 (and optionally UART0) signals to eSDHC. */
+	setbits_8(&bcsr[6], bcsr6);
+
+	return fsl_esdhc_mmc_init(bd);
+}
+
+static void fdt_board_fixup_esdhc(void *blob, bd_t *bd)
+{
+	const char *status = "disabled";
+	int off;
+	int err;
+
+	if (!hwconfig("esdhc"))
+		return;
+
+	if (!esdhc_disables_uart0())
+		goto disable_i2c2;
+
+	off = fdt_path_offset(blob, "serial0");
+	if (off < 0) {
+		printf("WARNING: could not find serial0 alias: %s.\n",
+			fdt_strerror(off));
+		goto disable_i2c2;
+	}
+
+	err = fdt_setprop(blob, off, "status", status, strlen(status) + 1);
+	if (err) {
+		printf("WARNING: could not set status for serial0: %s.\n",
+			fdt_strerror(err));
+		return;
+	}
+
+disable_i2c2:
+	off = -1;
+	while (1) {
+		const u32 *idx;
+		int len;
+
+		off = fdt_node_offset_by_compatible(blob, off, "fsl-i2c");
+		if (off < 0)
+			break;
+
+		idx = fdt_getprop(blob, off, "cell-index", &len);
+		if (!idx || len != sizeof(*idx))
+			continue;
+
+		if (*idx == 1) {
+			fdt_setprop(blob, off, "status", status,
+				    strlen(status) + 1);
+			break;
+		}
+	}
+}
+#else
+static inline void fdt_board_fixup_esdhc(void *blob, bd_t *bd) {}
+#endif
+
 #ifdef CONFIG_PCIE1
 static struct pci_controller pcie1_hose;
 #endif  /* CONFIG_PCIE1 */
@@ -444,5 +559,6 @@ void ft_board_setup(void *blob, bd_t *bd)
 #ifdef CONFIG_PCIE1
 	ft_fsl_pci_setup(blob, "pci1", &pcie1_hose);
 #endif
+	fdt_board_fixup_esdhc(blob, bd);
 }
 #endif
diff --git a/cpu/mpc85xx/speed.c b/cpu/mpc85xx/speed.c
index 0244b5c1b7e6b574079b1898776f045f0d857d06..7959082404ba9470cd355642d4676c00f75cabaf 100644
--- a/cpu/mpc85xx/speed.c
+++ b/cpu/mpc85xx/speed.c
@@ -240,8 +240,12 @@ int get_clocks (void)
 	gd->i2c2_clk = gd->i2c1_clk;
 
 #if defined(CONFIG_FSL_ESDHC)
+#ifdef CONFIG_MPC8569
+	gd->sdhc_clk = gd->bus_clk;
+#else
 	gd->sdhc_clk = gd->bus_clk / 2;
 #endif
+#endif /* defined(CONFIG_FSL_ESDHC) */
 
 #if defined(CONFIG_CPM2)
 	gd->vco_out = 2*sys_info.freqSystemBus;
diff --git a/include/configs/MPC8569MDS.h b/include/configs/MPC8569MDS.h
index 32e747efb35bcefcb4a972b33fae85b3144486c5..3d07a5b5dc2a96e56b0d12f11b50dd273cbab5e9 100644
--- a/include/configs/MPC8569MDS.h
+++ b/include/configs/MPC8569MDS.h
@@ -70,6 +70,7 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_ENABLE_36BIT_PHYS	1
 
 #define CONFIG_BOARD_EARLY_INIT_F	1	/* Call board_pre_init */
+#define CONFIG_HWCONFIG
 
 #define CONFIG_SYS_MEMTEST_START	0x00200000	/* memtest works on */
 #define CONFIG_SYS_MEMTEST_END		0x00400000
@@ -206,6 +207,7 @@ extern unsigned long get_clock_freq(void);
 
 /* Serial Port */
 #define CONFIG_CONS_INDEX		1
+#define CONFIG_SERIAL_MULTI		1
 #undef	CONFIG_SERIAL_SOFTWARE_FIFO
 #define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
@@ -258,8 +260,10 @@ extern unsigned long get_clock_freq(void);
 
 #define PLPPAR1_I2C_BIT_MASK		0x0000000F
 #define PLPPAR1_I2C2_VAL		0x00000000
+#define PLPPAR1_ESDHC_VAL		0x0000000A
 #define PLPDIR1_I2C_BIT_MASK		0x0000000F
 #define PLPDIR1_I2C2_VAL		0x0000000F
+#define PLPDIR1_ESDHC_VAL		0x00000006
 
 /*
  * General PCI
@@ -450,6 +454,18 @@ extern unsigned long get_clock_freq(void);
 
 #undef CONFIG_WATCHDOG			/* watchdog disabled */
 
+#define CONFIG_MMC     1
+
+#ifdef CONFIG_MMC
+#define CONFIG_FSL_ESDHC
+#define CONFIG_SYS_FSL_ESDHC_ADDR	CONFIG_SYS_MPC85xx_ESDHC_ADDR
+#define CONFIG_CMD_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#define CONFIG_DOS_PARTITION
+#endif
+
 /*
  * Miscellaneous configurable options
  */