diff --git a/arch/arm/dts/at91-sama5d2_xplained.dts b/arch/arm/dts/at91-sama5d2_xplained.dts
index b00aaa2c79209eed3fd0ac313c4f9793a20b108c..01326a1ee03472250d4e2367e974b9064b362f4c 100644
--- a/arch/arm/dts/at91-sama5d2_xplained.dts
+++ b/arch/arm/dts/at91-sama5d2_xplained.dts
@@ -41,6 +41,31 @@
};
apb {
+ hlcdc: hlcdc@f0000000 {
+ atmel,vl-bpix = <4>;
+ atmel,guard-time = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_pwm &pinctrl_lcd_rgb666>;
+ status = "okay";
+ u-boot,dm-pre-reloc;
+
+ display-timings {
+ u-boot,dm-pre-reloc;
+ 480x272 {
+ clock-frequency = <9000000>;
+ hactive = <480>;
+ vactive = <272>;
+ hsync-len = <41>;
+ hfront-porch = <2>;
+ hback-porch = <2>;
+ vfront-porch = <2>;
+ vback-porch = <2>;
+ vsync-len = <11>;
+ u-boot,dm-pre-reloc;
+ };
+ };
+ };
+
qspi0: spi@f0020000 {
status = "okay";
@@ -117,6 +142,41 @@
bias-disable;
};
+ pinctrl_lcd_base: pinctrl_lcd_base {
+ pinmux = <PIN_PC30__LCDVSYNC>,
+ <PIN_PC31__LCDHSYNC>,
+ <PIN_PD1__LCDDEN>,
+ <PIN_PD0__LCDPCK>;
+ bias-disable;
+ };
+
+ pinctrl_lcd_pwm: pinctrl_lcd_pwm {
+ pinmux = <PIN_PC28__LCDPWM>;
+ bias-disable;
+ };
+
+ pinctrl_lcd_rgb666: pinctrl_lcd_rgb666 {
+ pinmux = <PIN_PC10__LCDDAT2>,
+ <PIN_PC11__LCDDAT3>,
+ <PIN_PC12__LCDDAT4>,
+ <PIN_PC13__LCDDAT5>,
+ <PIN_PC14__LCDDAT6>,
+ <PIN_PC15__LCDDAT7>,
+ <PIN_PC16__LCDDAT10>,
+ <PIN_PC17__LCDDAT11>,
+ <PIN_PC18__LCDDAT12>,
+ <PIN_PC19__LCDDAT13>,
+ <PIN_PC20__LCDDAT14>,
+ <PIN_PC21__LCDDAT15>,
+ <PIN_PC22__LCDDAT18>,
+ <PIN_PC23__LCDDAT19>,
+ <PIN_PC24__LCDDAT20>,
+ <PIN_PC25__LCDDAT21>,
+ <PIN_PC26__LCDDAT22>,
+ <PIN_PC27__LCDDAT23>;
+ bias-disable;
+ };
+
pinctrl_macb0_phy_irq: macb0_phy_irq {
pinmux = <PIN_PC9__GPIO>;
bias-disable;
diff --git a/arch/arm/dts/at91-sama5d4_xplained.dts b/arch/arm/dts/at91-sama5d4_xplained.dts
index 0592b31b91733ef846dacdebc083175dd395b2e0..ea35dc21b6fe61e692302de7465b84c525d2ff35 100644
--- a/arch/arm/dts/at91-sama5d4_xplained.dts
+++ b/arch/arm/dts/at91-sama5d4_xplained.dts
@@ -74,6 +74,31 @@
ahb {
apb {
+ hlcdc: hlcdc@f0000000 {
+ atmel,vl-bpix = <4>;
+ atmel,guard-time = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_pwm &pinctrl_lcd_rgb888>;
+ status = "okay";
+ u-boot,dm-pre-reloc;
+
+ display-timings {
+ u-boot,dm-pre-reloc;
+ 480x272 {
+ clock-frequency = <9000000>;
+ hactive = <480>;
+ vactive = <272>;
+ hsync-len = <41>;
+ hfront-porch = <2>;
+ hback-porch = <2>;
+ vfront-porch = <2>;
+ vback-porch = <2>;
+ vsync-len = <11>;
+ u-boot,dm-pre-reloc;
+ };
+ };
+ };
+
spi0: spi@f8010000 {
u-boot,dm-pre-reloc;
cs-gpios = <&pioC 3 0>, <0>, <0>, <0>;
diff --git a/arch/arm/dts/at91-sama5d4ek.dts b/arch/arm/dts/at91-sama5d4ek.dts
index b965f5b39dc67437b103cc1695b06580548edc1f..a5d75452cf3e8fff1c845e672cf1009f3c27f3a4 100644
--- a/arch/arm/dts/at91-sama5d4ek.dts
+++ b/arch/arm/dts/at91-sama5d4ek.dts
@@ -75,6 +75,32 @@
ahb {
apb {
+ hlcdc: hlcdc@f0000000 {
+ atmel,vl-bpix = <4>;
+ atmel,output-mode = <18>;
+ atmel,guard-time = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_pwm &pinctrl_lcd_rgb666>;
+ status = "okay";
+ u-boot,dm-pre-reloc;
+
+ display-timings {
+ u-boot,dm-pre-reloc;
+ 800x480 {
+ clock-frequency = <33260000>;
+ hactive = <800>;
+ vactive = <480>;
+ hsync-len = <5>;
+ hfront-porch = <128>;
+ hback-porch = <0>;
+ vfront-porch = <23>;
+ vback-porch = <22>;
+ vsync-len = <5>;
+ u-boot,dm-pre-reloc;
+ };
+ };
+ };
+
adc0: adc@fc034000 {
pinctrl-names = "default";
pinctrl-0 = <
diff --git a/arch/arm/dts/sama5d2.dtsi b/arch/arm/dts/sama5d2.dtsi
index b02a602378ee81304f0ca2e1f269173ef8b9342f..7520446dc1a5f79c9cc46c744c9dd7844e793715 100644
--- a/arch/arm/dts/sama5d2.dtsi
+++ b/arch/arm/dts/sama5d2.dtsi
@@ -69,6 +69,13 @@
#size-cells = <1>;
u-boot,dm-pre-reloc;
+ hlcdc: hlcdc@f0000000 {
+ compatible = "atmel,at91sam9x5-hlcdc";
+ reg = <0xf0000000 0x2000>;
+ clocks = <&lcdc_clk>;
+ status = "disabled";
+ };
+
pmc: pmc@f0014000 {
compatible = "atmel,sama5d2-pmc", "syscon";
reg = <0xf0014000 0x160>;
diff --git a/arch/arm/dts/sama5d36ek_cmp.dts b/arch/arm/dts/sama5d36ek_cmp.dts
index be41490f63fb0e7fa78e05ddb22d5d95ecc02301..c17bc9f0dce66ab0c714c45444e99aee69f89326 100644
--- a/arch/arm/dts/sama5d36ek_cmp.dts
+++ b/arch/arm/dts/sama5d36ek_cmp.dts
@@ -8,6 +8,7 @@
/dts-v1/;
#include "sama5d36.dtsi"
#include "sama5d3xmb_cmp.dtsi"
+#include "sama5d3xdm.dtsi"
/ {
model = "Atmel SAMA5D36-EK";
diff --git a/arch/arm/dts/sama5d3_lcd.dtsi b/arch/arm/dts/sama5d3_lcd.dtsi
index 14d7c2bc75ca8a5308b425c81ea7517d3e78219a..10fb3a97ea499f5cf0cbbe017856ac63d852aa26 100644
--- a/arch/arm/dts/sama5d3_lcd.dtsi
+++ b/arch/arm/dts/sama5d3_lcd.dtsi
@@ -14,31 +14,12 @@
ahb {
apb {
hlcdc: hlcdc@f0030000 {
- compatible = "atmel,sama5d3-hlcdc";
+ compatible = "atmel,at91sam9x5-hlcdc";
reg = <0xf0030000 0x2000>;
interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>;
clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>;
clock-names = "periph_clk","sys_clk", "slow_clk";
status = "disabled";
-
- hlcdc-display-controller {
- compatible = "atmel,hlcdc-display-controller";
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
- };
- };
-
- hlcdc_pwm: hlcdc-pwm {
- compatible = "atmel,hlcdc-pwm";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_lcd_pwm>;
- #pwm-cells = <3>;
- };
};
pinctrl@fffff200 {
diff --git a/arch/arm/dts/sama5d3xdm.dtsi b/arch/arm/dts/sama5d3xdm.dtsi
index 035ab72b39903c474aeb60c80a44ee0f9207d489..b3df9af2b42da3b566d258bc2b91f4578cd773d5 100644
--- a/arch/arm/dts/sama5d3xdm.dtsi
+++ b/arch/arm/dts/sama5d3xdm.dtsi
@@ -10,6 +10,32 @@
/ {
ahb {
apb {
+ hlcdc: hlcdc@f0030000 {
+ atmel,vl-bpix = <4>;
+ atmel,output-mode = <24>;
+ atmel,guard-time = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_pwm &pinctrl_lcd_rgb888_alt>;
+ status = "okay";
+ u-boot,dm-pre-reloc;
+
+ display-timings {
+ u-boot,dm-pre-reloc;
+ 800x480 {
+ clock-frequency = <24000000>;
+ hactive = <800>;
+ vactive = <480>;
+ hsync-len = <5>;
+ hfront-porch = <64>;
+ hback-porch = <64>;
+ vfront-porch = <22>;
+ vback-porch = <21>;
+ vsync-len = <5>;
+ u-boot,dm-pre-reloc;
+ };
+ };
+ };
+
i2c1: i2c@f0018000 {
qt1070: keyboard@1b {
compatible = "qt1070";
diff --git a/arch/arm/dts/sama5d4.dtsi b/arch/arm/dts/sama5d4.dtsi
index c6512ae437c6062e7be05b5c4e15060a890a5d7b..8072b8a4f23a037169abc32803eb178d9df65815 100644
--- a/arch/arm/dts/sama5d4.dtsi
+++ b/arch/arm/dts/sama5d4.dtsi
@@ -320,31 +320,12 @@
u-boot,dm-pre-reloc;
hlcdc: hlcdc@f0000000 {
- compatible = "atmel,sama5d4-hlcdc";
+ compatible = "atmel,at91sam9x5-hlcdc";
reg = <0xf0000000 0x4000>;
interrupts = <51 IRQ_TYPE_LEVEL_HIGH 0>;
clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>;
clock-names = "periph_clk","sys_clk", "slow_clk";
status = "disabled";
-
- hlcdc-display-controller {
- compatible = "atmel,hlcdc-display-controller";
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
- };
- };
-
- hlcdc_pwm: hlcdc-pwm {
- compatible = "atmel,hlcdc-pwm";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_lcd_pwm>;
- #pwm-cells = <3>;
- };
};
dma1: dma-controller@f0004000 {
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 0e71b69a1965b55c445d97f9628a708809f2c7ac..7e85b69679d2b4eb3bdcd005776042300ae5a3fc 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -141,6 +141,7 @@ config TARGET_AT91SAM9X5EK
select AT91SAM9X5
select SUPPORT_SPL
select BOARD_EARLY_INIT_F
+ select BOARD_LATE_INIT
config TARGET_SAMA5D2_PTC
bool "SAMA5D2 PTC board"
@@ -153,6 +154,7 @@ config TARGET_SAMA5D2_XPLAINED
select SAMA5D2
select SUPPORT_SPL
select BOARD_EARLY_INIT_F
+ select BOARD_LATE_INIT
config TARGET_SAMA5D27_SOM1_EK
bool "SAMA5D27 SOM1 EK board"
@@ -185,12 +187,14 @@ config TARGET_SAMA5D4_XPLAINED
select SAMA5D4
select SUPPORT_SPL
select BOARD_EARLY_INIT_F
+ select BOARD_LATE_INIT
config TARGET_SAMA5D4EK
bool "SAMA5D4 Evaluation Kit"
select SAMA5D4
select SUPPORT_SPL
select BOARD_EARLY_INIT_F
+ select BOARD_LATE_INIT
config TARGET_MA5D4EVK
bool "Aries MA5D4EVK Evaluation Kit"
diff --git a/board/atmel/at91sam9x5ek/at91sam9x5ek.c b/board/atmel/at91sam9x5ek/at91sam9x5ek.c
index be6dd4a6d39223143af71bfd3778fa3f5358ea2d..d69831ad152edf7c16940903d61c1736c54f0def 100644
--- a/board/atmel/at91sam9x5ek/at91sam9x5ek.c
+++ b/board/atmel/at91sam9x5ek/at91sam9x5ek.c
@@ -13,12 +13,6 @@
#include <asm/arch/clk.h>
#include <asm/arch/gpio.h>
#include <debug_uart.h>
-#include <lcd.h>
-#include <atmel_hlcdc.h>
-#ifdef CONFIG_LCD_INFO
-#include <nand.h>
-#include <version.h>
-#endif
#include <asm/mach-types.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -86,103 +80,15 @@ static void at91sam9x5ek_nand_hw_init(void)
}
#endif
-#ifdef CONFIG_LCD
-vidinfo_t panel_info = {
- .vl_col = 800,
- .vl_row = 480,
- .vl_clk = 24000000,
- .vl_sync = LCDC_LCDCFG5_HSPOL | LCDC_LCDCFG5_VSPOL,
- .vl_bpix = LCD_BPP,
- .vl_tft = 1,
- .vl_clk_pol = 1,
- .vl_hsync_len = 128,
- .vl_left_margin = 64,
- .vl_right_margin = 64,
- .vl_vsync_len = 2,
- .vl_upper_margin = 22,
- .vl_lower_margin = 21,
- .mmio = ATMEL_BASE_LCDC,
-};
-
-void lcd_enable(void)
-{
- if (has_lcdc())
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 29, 1); /* power up */
-}
-
-void lcd_disable(void)
-{
- if (has_lcdc())
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 29, 0); /* power down */
-}
-
-static void at91sam9x5ek_lcd_hw_init(void)
-{
- if (has_lcdc()) {
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 26, 0); /* LCDPWM */
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 27, 0); /* LCDVSYNC */
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 28, 0); /* LCDHSYNC */
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 24, 0); /* LCDDISP */
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 29, 0); /* LCDDEN */
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 30, 0); /* LCDPCK */
-
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 0, 0); /* LCDD0 */
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 1, 0); /* LCDD1 */
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 2, 0); /* LCDD2 */
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 3, 0); /* LCDD3 */
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 4, 0); /* LCDD4 */
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 5, 0); /* LCDD5 */
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 6, 0); /* LCDD6 */
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 7, 0); /* LCDD7 */
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 8, 0); /* LCDD8 */
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 9, 0); /* LCDD9 */
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 10, 0); /* LCDD10 */
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 11, 0); /* LCDD11 */
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 12, 0); /* LCDD12 */
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 13, 0); /* LCDD13 */
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 14, 0); /* LCDD14 */
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 15, 0); /* LCDD15 */
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 16, 0); /* LCDD16 */
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 17, 0); /* LCDD17 */
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 18, 0); /* LCDD18 */
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 19, 0); /* LCDD19 */
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 20, 0); /* LCDD20 */
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 21, 0); /* LCDD21 */
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 22, 0); /* LCDD22 */
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 23, 0); /* LCDD23 */
-
- at91_periph_clk_enable(ATMEL_ID_LCDC);
- }
-}
-
-#ifdef CONFIG_LCD_INFO
-void lcd_show_board_info(void)
+#ifdef CONFIG_BOARD_LATE_INIT
+int board_late_init(void)
{
- ulong dram_size, nand_size;
- int i;
- char temp[32];
-
- if (has_lcdc()) {
- lcd_printf("%s\n", U_BOOT_VERSION);
- lcd_printf("(C) 2012 ATMEL Corp\n");
- lcd_printf("at91support@atmel.com\n");
- lcd_printf("%s CPU at %s MHz\n",
- get_cpu_name(),
- strmhz(temp, get_cpu_clk_rate()));
-
- dram_size = 0;
- for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++)
- dram_size += gd->bd->bi_dram[i].size;
- nand_size = 0;
- for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++)
- nand_size += get_nand_dev_by_index(i)->size;
- lcd_printf(" %ld MB SDRAM, %ld MB NAND\n",
- dram_size >> 20,
- nand_size >> 20);
- }
+#ifdef CONFIG_DM_VIDEO
+ at91_video_show_board_info();
+#endif
+ return 0;
}
-#endif /* CONFIG_LCD_INFO */
-#endif /* CONFIG_LCD */
+#endif
#ifdef CONFIG_DEBUG_UART_BOARD_INIT
void board_debug_uart_init(void)
@@ -215,9 +121,6 @@ int board_init(void)
#if defined(CONFIG_USB_OHCI_NEW) || defined(CONFIG_USB_EHCI_HCD)
at91_uhp_hw_init();
-#endif
-#ifdef CONFIG_LCD
- at91sam9x5ek_lcd_hw_init();
#endif
return 0;
}
diff --git a/board/atmel/common/video_display.c b/board/atmel/common/video_display.c
index 39ad6198192c507a7e3a8eeb0f48319114fc4768..b20abc738674a0d2cfa7e61d0ee4f8d309b467be 100644
--- a/board/atmel/common/video_display.c
+++ b/board/atmel/common/video_display.c
@@ -43,7 +43,7 @@ int at91_video_show_board_info(void)
nand_size = 0;
#ifdef CONFIG_NAND_ATMEL
for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++)
- nand_size += nand_info[i]->size;
+ nand_size += get_nand_dev_by_index(i)->size;
#endif
len += sprintf(&buf[len], "%ld MB SDRAM, %ld MB NAND\n",
diff --git a/board/atmel/sama5d2_xplained/sama5d2_xplained.c b/board/atmel/sama5d2_xplained/sama5d2_xplained.c
index 57586530304531880c6a6f7b702b6d1b9d09c048..778142ac7161c2da494f101a31272daafb7e6464 100644
--- a/board/atmel/sama5d2_xplained/sama5d2_xplained.c
+++ b/board/atmel/sama5d2_xplained/sama5d2_xplained.c
@@ -6,10 +6,7 @@
*/
#include <common.h>
-#include <atmel_hlcdc.h>
#include <debug_uart.h>
-#include <lcd.h>
-#include <version.h>
#include <asm/io.h>
#include <asm/arch/at91_common.h>
#include <asm/arch/atmel_pio4.h>
@@ -26,90 +23,15 @@ static void board_usb_hw_init(void)
atmel_pio4_set_pio_output(AT91_PIO_PORTB, 10, 1);
}
-#ifdef CONFIG_LCD
-vidinfo_t panel_info = {
- .vl_col = 480,
- .vl_row = 272,
- .vl_clk = 9000000,
- .vl_bpix = LCD_BPP,
- .vl_tft = 1,
- .vl_hsync_len = 41,
- .vl_left_margin = 2,
- .vl_right_margin = 2,
- .vl_vsync_len = 11,
- .vl_upper_margin = 2,
- .vl_lower_margin = 2,
- .mmio = ATMEL_BASE_LCDC,
-};
-
-/* No power up/down pin for the LCD pannel */
-void lcd_enable(void) { /* Empty! */ }
-void lcd_disable(void) { /* Empty! */ }
-
-unsigned int has_lcdc(void)
+#ifdef CONFIG_BOARD_LATE_INIT
+int board_late_init(void)
{
- return 1;
-}
-
-static void board_lcd_hw_init(void)
-{
- atmel_pio4_set_a_periph(AT91_PIO_PORTC, 28, 0); /* LCDPWM */
- atmel_pio4_set_a_periph(AT91_PIO_PORTC, 29, 0); /* LCDDISP */
- atmel_pio4_set_a_periph(AT91_PIO_PORTC, 30, 0); /* LCDVSYNC */
- atmel_pio4_set_a_periph(AT91_PIO_PORTC, 31, 0); /* LCDHSYNC */
- atmel_pio4_set_a_periph(AT91_PIO_PORTD, 0, 0); /* LCDPCK */
- atmel_pio4_set_a_periph(AT91_PIO_PORTD, 1, 0); /* LCDDEN */
-
- /* LCDDAT0 */
- /* LCDDAT1 */
- atmel_pio4_set_a_periph(AT91_PIO_PORTC, 10, 0); /* LCDDAT2 */
- atmel_pio4_set_a_periph(AT91_PIO_PORTC, 11, 0); /* LCDDAT3 */
- atmel_pio4_set_a_periph(AT91_PIO_PORTC, 12, 0); /* LCDDAT4 */
- atmel_pio4_set_a_periph(AT91_PIO_PORTC, 13, 0); /* LCDDAT5 */
- atmel_pio4_set_a_periph(AT91_PIO_PORTC, 14, 0); /* LCDDAT6 */
- atmel_pio4_set_a_periph(AT91_PIO_PORTC, 15, 0); /* LCDDAT7 */
-
- /* LCDDAT8 */
- /* LCDDAT9 */
- atmel_pio4_set_a_periph(AT91_PIO_PORTC, 16, 0); /* LCDDAT10 */
- atmel_pio4_set_a_periph(AT91_PIO_PORTC, 17, 0); /* LCDDAT11 */
- atmel_pio4_set_a_periph(AT91_PIO_PORTC, 18, 0); /* LCDDAT12 */
- atmel_pio4_set_a_periph(AT91_PIO_PORTC, 19, 0); /* LCDDAT13 */
- atmel_pio4_set_a_periph(AT91_PIO_PORTC, 20, 0); /* LCDDAT14 */
- atmel_pio4_set_a_periph(AT91_PIO_PORTC, 21, 0); /* LCDDAT15 */
-
- /* LCDD16 */
- /* LCDD17 */
- atmel_pio4_set_a_periph(AT91_PIO_PORTC, 22, 0); /* LCDDAT18 */
- atmel_pio4_set_a_periph(AT91_PIO_PORTC, 23, 0); /* LCDDAT19 */
- atmel_pio4_set_a_periph(AT91_PIO_PORTC, 24, 0); /* LCDDAT20 */
- atmel_pio4_set_a_periph(AT91_PIO_PORTC, 25, 0); /* LCDDAT21 */
- atmel_pio4_set_a_periph(AT91_PIO_PORTC, 26, 0); /* LCDDAT22 */
- atmel_pio4_set_a_periph(AT91_PIO_PORTC, 27, 0); /* LCDDAT23 */
-
- at91_periph_clk_enable(ATMEL_ID_LCDC);
-}
-
-#ifdef CONFIG_LCD_INFO
-void lcd_show_board_info(void)
-{
- ulong dram_size;
- int i;
- char temp[32];
-
- lcd_printf("%s\n", U_BOOT_VERSION);
- lcd_printf("2015 ATMEL Corp\n");
- lcd_printf("%s CPU at %s MHz\n", get_cpu_name(),
- strmhz(temp, get_cpu_clk_rate()));
-
- dram_size = 0;
- for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++)
- dram_size += gd->bd->bi_dram[i].size;
-
- lcd_printf("%ld MB SDRAM\n", dram_size >> 20);
+#ifdef CONFIG_DM_VIDEO
+ at91_video_show_board_info();
+#endif
+ return 0;
}
-#endif /* CONFIG_LCD_INFO */
-#endif /* CONFIG_LCD */
+#endif
#ifdef CONFIG_DEBUG_UART_BOARD_INIT
static void board_uart1_hw_init(void)
@@ -142,9 +64,6 @@ int board_init(void)
/* address of boot parameters */
gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
-#ifdef CONFIG_LCD
- board_lcd_hw_init();
-#endif
#ifdef CONFIG_CMD_USB
board_usb_hw_init();
#endif
diff --git a/board/atmel/sama5d3xek/sama5d3xek.c b/board/atmel/sama5d3xek/sama5d3xek.c
index 6d473fc06dbd94e67cc64796d55d0a642c300939..98d846fd79e250e3169f492674ebcfcec7d66865 100644
--- a/board/atmel/sama5d3xek/sama5d3xek.c
+++ b/board/atmel/sama5d3xek/sama5d3xek.c
@@ -13,9 +13,7 @@
#include <asm/arch/gpio.h>
#include <asm/arch/clk.h>
#include <debug_uart.h>
-#include <lcd.h>
#include <linux/ctype.h>
-#include <atmel_hlcdc.h>
#include <phy.h>
#include <micrel.h>
#include <spl.h>
@@ -132,80 +130,6 @@ static void sama5d3xek_mci_hw_init(void)
}
#endif
-#ifdef CONFIG_LCD
-vidinfo_t panel_info = {
- .vl_col = 800,
- .vl_row = 480,
- .vl_clk = 24000000,
- .vl_bpix = LCD_BPP,
- .vl_tft = 1,
- .vl_hsync_len = 128,
- .vl_left_margin = 64,
- .vl_right_margin = 64,
- .vl_vsync_len = 2,
- .vl_upper_margin = 22,
- .vl_lower_margin = 21,
- .mmio = ATMEL_BASE_LCDC,
-};
-
-void lcd_enable(void)
-{
-}
-
-void lcd_disable(void)
-{
-}
-
-static void sama5d3xek_lcd_hw_init(void)
-{
- gd->fb_base = CONFIG_SAMA5D3_LCD_BASE;
-
- /* The higher 8 bit of LCD is board related */
- at91_pio3_set_c_periph(AT91_PIO_PORTC, 14, 0); /* LCDD16 */
- at91_pio3_set_c_periph(AT91_PIO_PORTC, 13, 0); /* LCDD17 */
- at91_pio3_set_c_periph(AT91_PIO_PORTC, 12, 0); /* LCDD18 */
- at91_pio3_set_c_periph(AT91_PIO_PORTC, 11, 0); /* LCDD19 */
- at91_pio3_set_c_periph(AT91_PIO_PORTC, 10, 0); /* LCDD20 */
- at91_pio3_set_c_periph(AT91_PIO_PORTC, 15, 0); /* LCDD21 */
- at91_pio3_set_c_periph(AT91_PIO_PORTE, 27, 0); /* LCDD22 */
- at91_pio3_set_c_periph(AT91_PIO_PORTE, 28, 0); /* LCDD23 */
-
- /* Configure lower 16 bit of LCD and enable clock */
- at91_lcd_hw_init();
-}
-
-#ifdef CONFIG_LCD_INFO
-#include <nand.h>
-#include <version.h>
-
-void lcd_show_board_info(void)
-{
- ulong dram_size;
- uint64_t nand_size;
- int i;
- char temp[32];
-
- lcd_printf("%s\n", U_BOOT_VERSION);
- lcd_printf("(C) 2013 ATMEL Corp\n");
- lcd_printf("at91@atmel.com\n");
- lcd_printf("%s CPU at %s MHz\n", get_cpu_name(),
- strmhz(temp, get_cpu_clk_rate()));
-
- dram_size = 0;
- for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++)
- dram_size += gd->bd->bi_dram[i].size;
-
- nand_size = 0;
-#ifdef CONFIG_NAND_ATMEL
- for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++)
- nand_size += get_nand_dev_by_index(i)->size;
-#endif
- lcd_printf("%ld MB SDRAM, %lld MB NAND\n",
- dram_size >> 20, nand_size >> 20);
-}
-#endif /* CONFIG_LCD_INFO */
-#endif /* CONFIG_LCD */
-
#ifdef CONFIG_DEBUG_UART_BOARD_INIT
void board_debug_uart_init(void)
{
@@ -239,10 +163,6 @@ int board_init(void)
#endif
#ifdef CONFIG_GENERIC_ATMEL_MCI
sama5d3xek_mci_hw_init();
-#endif
-#ifdef CONFIG_LCD
- if (has_lcdc())
- sama5d3xek_lcd_hw_init();
#endif
return 0;
}
@@ -268,6 +188,9 @@ int board_late_init(void)
strcat(name, "ek.dtb");
env_set("dtb_name", name);
+#endif
+#ifdef CONFIG_DM_VIDEO
+ at91_video_show_board_info();
#endif
return 0;
}
diff --git a/board/atmel/sama5d4_xplained/sama5d4_xplained.c b/board/atmel/sama5d4_xplained/sama5d4_xplained.c
index 9236a285492105224d3d40203f1e9f9eb3520410..78eddb8beb01f749829a20493c764ab2cb83e340 100644
--- a/board/atmel/sama5d4_xplained/sama5d4_xplained.c
+++ b/board/atmel/sama5d4_xplained/sama5d4_xplained.c
@@ -14,11 +14,7 @@
#include <asm/arch/clk.h>
#include <asm/arch/sama5d3_smc.h>
#include <asm/arch/sama5d4.h>
-#include <atmel_hlcdc.h>
#include <debug_uart.h>
-#include <lcd.h>
-#include <nand.h>
-#include <version.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -73,98 +69,15 @@ static void sama5d4_xplained_usb_hw_init(void)
}
#endif
-#ifdef CONFIG_LCD
-vidinfo_t panel_info = {
- .vl_col = 480,
- .vl_row = 272,
- .vl_clk = 9000000,
- .vl_bpix = LCD_BPP,
- .vl_tft = 1,
- .vl_hsync_len = 41,
- .vl_left_margin = 2,
- .vl_right_margin = 2,
- .vl_vsync_len = 11,
- .vl_upper_margin = 2,
- .vl_lower_margin = 2,
- .mmio = ATMEL_BASE_LCDC,
-};
-
-/* No power up/down pin for the LCD pannel */
-void lcd_enable(void) { /* Empty! */ }
-void lcd_disable(void) { /* Empty! */ }
-
-unsigned int has_lcdc(void)
+#ifdef CONFIG_BOARD_LATE_INIT
+int board_late_init(void)
{
- return 1;
-}
-
-static void sama5d4_xplained_lcd_hw_init(void)
-{
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 24, 0); /* LCDPWM */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 25, 0); /* LCDDISP */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 26, 0); /* LCDVSYNC */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 27, 0); /* LCDHSYNC */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 28, 0); /* LCDDOTCK */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 29, 0); /* LCDDEN */
-
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 0, 0); /* LCDD0 */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 1, 0); /* LCDD1 */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 2, 0); /* LCDD2 */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 3, 0); /* LCDD3 */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 4, 0); /* LCDD4 */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 5, 0); /* LCDD5 */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 6, 0); /* LCDD6 */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 7, 0); /* LCDD7 */
-
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 8, 0); /* LCDD9 */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 9, 0); /* LCDD8 */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 10, 0); /* LCDD10 */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 11, 0); /* LCDD11 */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 12, 0); /* LCDD12 */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 13, 0); /* LCDD13 */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 14, 0); /* LCDD14 */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 15, 0); /* LCDD15 */
-
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 16, 0); /* LCDD16 */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 17, 0); /* LCDD17 */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 18, 0); /* LCDD18 */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 19, 0); /* LCDD19 */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 20, 0); /* LCDD20 */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 21, 0); /* LCDD21 */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 22, 0); /* LCDD22 */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 23, 0); /* LCDD23 */
-
- /* Enable clock */
- at91_periph_clk_enable(ATMEL_ID_LCDC);
-}
-
-#ifdef CONFIG_LCD_INFO
-void lcd_show_board_info(void)
-{
- ulong dram_size, nand_size;
- int i;
- char temp[32];
-
- lcd_printf("%s\n", U_BOOT_VERSION);
- lcd_printf("2014 ATMEL Corp\n");
- lcd_printf("%s CPU at %s MHz\n", get_cpu_name(),
- strmhz(temp, get_cpu_clk_rate()));
-
- dram_size = 0;
- for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++)
- dram_size += gd->bd->bi_dram[i].size;
-
- nand_size = 0;
-#ifdef CONFIG_NAND_ATMEL
- for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++)
- nand_size += get_nand_dev_by_index(i)->size;
+#ifdef CONFIG_DM_VIDEO
+ at91_video_show_board_info();
#endif
- lcd_printf("%ld MB SDRAM, %ld MB NAND\n",
- dram_size >> 20, nand_size >> 20);
+ return 0;
}
-#endif /* CONFIG_LCD_INFO */
-
-#endif /* CONFIG_LCD */
+#endif
#ifdef CONFIG_DEBUG_UART_BOARD_INIT
static void sama5d4_xplained_serial3_hw_init(void)
@@ -212,9 +125,6 @@ int board_init(void)
#ifdef CONFIG_NAND_ATMEL
sama5d4_xplained_nand_hw_init();
#endif
-#ifdef CONFIG_LCD
- sama5d4_xplained_lcd_hw_init();
-#endif
#ifdef CONFIG_CMD_USB
sama5d4_xplained_usb_hw_init();
#endif
diff --git a/board/atmel/sama5d4ek/sama5d4ek.c b/board/atmel/sama5d4ek/sama5d4ek.c
index ee07038e2e4f9e2270a94351297495bae6c6dc0b..48c43f01630a25c46fd72b4079c5777984ef34d6 100644
--- a/board/atmel/sama5d4ek/sama5d4ek.c
+++ b/board/atmel/sama5d4ek/sama5d4ek.c
@@ -14,11 +14,7 @@
#include <asm/arch/clk.h>
#include <asm/arch/sama5d3_smc.h>
#include <asm/arch/sama5d4.h>
-#include <atmel_hlcdc.h>
#include <debug_uart.h>
-#include <lcd.h>
-#include <nand.h>
-#include <version.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -74,93 +70,15 @@ static void sama5d4ek_usb_hw_init(void)
}
#endif
-#ifdef CONFIG_LCD
-vidinfo_t panel_info = {
- .vl_col = 800,
- .vl_row = 480,
- .vl_clk = 33260000,
- .vl_bpix = LCD_BPP,
- .vl_tft = 1,
- .vl_hsync_len = 5,
- .vl_left_margin = 128,
- .vl_right_margin = 0,
- .vl_vsync_len = 5,
- .vl_upper_margin = 23,
- .vl_lower_margin = 22,
- .mmio = ATMEL_BASE_LCDC,
-};
-
-/* No power up/down pin for the LCD pannel */
-void lcd_enable(void) { /* Empty! */ }
-void lcd_disable(void) { /* Empty! */ }
-
-unsigned int has_lcdc(void)
+#ifdef CONFIG_BOARD_LATE_INIT
+int board_late_init(void)
{
- return 1;
-}
-
-static void sama5d4ek_lcd_hw_init(void)
-{
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 24, 0); /* LCDPWM */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 25, 0); /* LCDDISP */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 26, 0); /* LCDVSYNC */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 27, 0); /* LCDHSYNC */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 28, 0); /* LCDDOTCK */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 29, 0); /* LCDDEN */
-
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 2, 0); /* LCDD2 */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 3, 0); /* LCDD3 */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 4, 0); /* LCDD4 */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 5, 0); /* LCDD5 */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 6, 0); /* LCDD6 */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 7, 0); /* LCDD7 */
-
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 10, 0); /* LCDD10 */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 11, 0); /* LCDD11 */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 12, 0); /* LCDD12 */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 13, 0); /* LCDD13 */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 14, 0); /* LCDD14 */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 15, 0); /* LCDD15 */
-
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 18, 0); /* LCDD18 */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 19, 0); /* LCDD19 */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 20, 0); /* LCDD20 */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 21, 0); /* LCDD21 */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 22, 0); /* LCDD22 */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 23, 0); /* LCDD23 */
-
- /* Enable clock */
- at91_periph_clk_enable(ATMEL_ID_LCDC);
-}
-
-#ifdef CONFIG_LCD_INFO
-void lcd_show_board_info(void)
-{
- ulong dram_size, nand_size;
- int i;
- char temp[32];
-
- lcd_printf("%s\n", U_BOOT_VERSION);
- lcd_printf("2014 ATMEL Corp\n");
- lcd_printf("at91@atmel.com\n");
- lcd_printf("%s CPU at %s MHz\n", get_cpu_name(),
- strmhz(temp, get_cpu_clk_rate()));
-
- dram_size = 0;
- for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++)
- dram_size += gd->bd->bi_dram[i].size;
-
- nand_size = 0;
-#ifdef CONFIG_NAND_ATMEL
- for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++)
- nand_size += get_nand_dev_by_index(i)->size;
+#ifdef CONFIG_DM_VIDEO
+ at91_video_show_board_info();
#endif
- lcd_printf("%ld MB SDRAM, %ld MB NAND\n",
- dram_size >> 20, nand_size >> 20);
+ return 0;
}
-#endif /* CONFIG_LCD_INFO */
-
-#endif /* CONFIG_LCD */
+#endif
#ifdef CONFIG_DEBUG_UART_BOARD_INIT
static void sama5d4ek_serial3_hw_init(void)
@@ -196,9 +114,6 @@ int board_init(void)
#ifdef CONFIG_NAND_ATMEL
sama5d4ek_nand_hw_init();
#endif
-#ifdef CONFIG_LCD
- sama5d4ek_lcd_hw_init();
-#endif
#ifdef CONFIG_CMD_USB
sama5d4ek_usb_hw_init();
#endif
diff --git a/configs/at91sam9x5ek_dataflash_defconfig b/configs/at91sam9x5ek_dataflash_defconfig
index 9d61dd8de0007d70a6f475ddfbaec4e0f2d1becf..c417eb8c10b679a3718f5c2fa4cc1a9d11a057af 100644
--- a/configs/at91sam9x5ek_dataflash_defconfig
+++ b/configs/at91sam9x5ek_dataflash_defconfig
@@ -60,4 +60,5 @@ CONFIG_USB=y
CONFIG_DM_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
-CONFIG_LCD=y
+CONFIG_DM_VIDEO=y
+CONFIG_ATMEL_HLCD=y
diff --git a/configs/at91sam9x5ek_mmc_defconfig b/configs/at91sam9x5ek_mmc_defconfig
index 9fa4801480b92186b2c5b09d8ba12933997e60bb..e0a24a5b48164217f57cc1653ac012eeb9505d21 100644
--- a/configs/at91sam9x5ek_mmc_defconfig
+++ b/configs/at91sam9x5ek_mmc_defconfig
@@ -60,4 +60,5 @@ CONFIG_USB=y
CONFIG_DM_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
-CONFIG_LCD=y
+CONFIG_DM_VIDEO=y
+CONFIG_ATMEL_HLCD=y
diff --git a/configs/at91sam9x5ek_nandflash_defconfig b/configs/at91sam9x5ek_nandflash_defconfig
index b28bec7f0bf7ac719058596ca66a0fa3ab11ac2c..0e8c07f6095498bc3d01ab0f34c84a3617c0a369 100644
--- a/configs/at91sam9x5ek_nandflash_defconfig
+++ b/configs/at91sam9x5ek_nandflash_defconfig
@@ -60,4 +60,5 @@ CONFIG_USB=y
CONFIG_DM_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
-CONFIG_LCD=y
+CONFIG_DM_VIDEO=y
+CONFIG_ATMEL_HLCD=y
diff --git a/configs/at91sam9x5ek_spiflash_defconfig b/configs/at91sam9x5ek_spiflash_defconfig
index 838d8a0ad7007133515195e14fa0e8d5eaf7718e..70e96ecc2fa2601f48db0007d20bea4d06b44b22 100644
--- a/configs/at91sam9x5ek_spiflash_defconfig
+++ b/configs/at91sam9x5ek_spiflash_defconfig
@@ -60,4 +60,5 @@ CONFIG_USB=y
CONFIG_DM_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
-CONFIG_LCD=y
+CONFIG_DM_VIDEO=y
+CONFIG_ATMEL_HLCD=y
diff --git a/configs/sama5d2_xplained_mmc_defconfig b/configs/sama5d2_xplained_mmc_defconfig
index 215961a65c0deb882cc496f9e7b51ff4fb70b19a..87fc049b6d53af0ba6999a16ef750e64ed5356be 100644
--- a/configs/sama5d2_xplained_mmc_defconfig
+++ b/configs/sama5d2_xplained_mmc_defconfig
@@ -82,3 +82,5 @@ CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_ATMEL_USBA=y
+CONFIG_DM_VIDEO=y
+CONFIG_ATMEL_HLCD=y
diff --git a/configs/sama5d2_xplained_spiflash_defconfig b/configs/sama5d2_xplained_spiflash_defconfig
index 869d405838e55e5dedbdb0ae5d7464a6eaef6829..37572489e2e08707b66e7e407276579358cf67fa 100644
--- a/configs/sama5d2_xplained_spiflash_defconfig
+++ b/configs/sama5d2_xplained_spiflash_defconfig
@@ -79,3 +79,5 @@ CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_ATMEL_USBA=y
+CONFIG_DM_VIDEO=y
+CONFIG_ATMEL_HLCD=y
diff --git a/configs/sama5d36ek_cmp_mmc_defconfig b/configs/sama5d36ek_cmp_mmc_defconfig
index b6c60cbcae69340b229ad3c51710882e3a1b0e40..7c27812c3ffeec95be906a94610018cd736c06e6 100644
--- a/configs/sama5d36ek_cmp_mmc_defconfig
+++ b/configs/sama5d36ek_cmp_mmc_defconfig
@@ -55,4 +55,5 @@ CONFIG_DM_SPI=y
CONFIG_ATMEL_SPI=y
CONFIG_TIMER=y
CONFIG_ATMEL_PIT_TIMER=y
-CONFIG_LCD=y
+CONFIG_DM_VIDEO=y
+CONFIG_ATMEL_HLCD=y
diff --git a/configs/sama5d36ek_cmp_nandflash_defconfig b/configs/sama5d36ek_cmp_nandflash_defconfig
index 01b57efe03da530de16229930de6ed167bb4ac08..09508dafa4995733912bb4f7958bed251bb480e4 100644
--- a/configs/sama5d36ek_cmp_nandflash_defconfig
+++ b/configs/sama5d36ek_cmp_nandflash_defconfig
@@ -55,5 +55,6 @@ CONFIG_DM_SPI=y
CONFIG_ATMEL_SPI=y
CONFIG_TIMER=y
CONFIG_ATMEL_PIT_TIMER=y
-CONFIG_LCD=y
CONFIG_FAT_WRITE=y
+CONFIG_DM_VIDEO=y
+CONFIG_ATMEL_HLCD=y
diff --git a/configs/sama5d36ek_cmp_spiflash_defconfig b/configs/sama5d36ek_cmp_spiflash_defconfig
index e29e3a809811fc1d8108d234d52ea2c06afb5ca1..1c004ef2ac6ea76449f69b566385858dcb75e115 100644
--- a/configs/sama5d36ek_cmp_spiflash_defconfig
+++ b/configs/sama5d36ek_cmp_spiflash_defconfig
@@ -55,5 +55,6 @@ CONFIG_DM_SPI=y
CONFIG_ATMEL_SPI=y
CONFIG_TIMER=y
CONFIG_ATMEL_PIT_TIMER=y
-CONFIG_LCD=y
+CONFIG_DM_VIDEO=y
+CONFIG_ATMEL_HLCD=y
CONFIG_FAT_WRITE=y
diff --git a/configs/sama5d3xek_mmc_defconfig b/configs/sama5d3xek_mmc_defconfig
index f45449fd93f6514fb3ac4f564245b29083939b2e..8b4c37a12530084256dd1b0a1285e9040675f5c8 100644
--- a/configs/sama5d3xek_mmc_defconfig
+++ b/configs/sama5d3xek_mmc_defconfig
@@ -81,4 +81,5 @@ CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_ATMEL_USBA=y
-CONFIG_LCD=y
+CONFIG_DM_VIDEO=y
+CONFIG_ATMEL_HLCD=y
diff --git a/configs/sama5d3xek_nandflash_defconfig b/configs/sama5d3xek_nandflash_defconfig
index 6217600f01d2941513d9de23c1945554b1f738b6..f9d4b8db3a81fb3e95e88c50a1c5e25b39668979 100644
--- a/configs/sama5d3xek_nandflash_defconfig
+++ b/configs/sama5d3xek_nandflash_defconfig
@@ -76,5 +76,6 @@ CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_ATMEL_USBA=y
-CONFIG_LCD=y
+CONFIG_DM_VIDEO=y
+CONFIG_ATMEL_HLCD=y
CONFIG_FAT_WRITE=y
diff --git a/configs/sama5d3xek_spiflash_defconfig b/configs/sama5d3xek_spiflash_defconfig
index 2fe08e4e59a30f07b67b9ac86a1313a27beb1ebc..7399b3e51f074896216f6b583c507496ba623fe6 100644
--- a/configs/sama5d3xek_spiflash_defconfig
+++ b/configs/sama5d3xek_spiflash_defconfig
@@ -77,5 +77,6 @@ CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_ATMEL_USBA=y
-CONFIG_LCD=y
+CONFIG_DM_VIDEO=y
+CONFIG_ATMEL_HLCD=y
CONFIG_FAT_WRITE=y
diff --git a/configs/sama5d4_xplained_mmc_defconfig b/configs/sama5d4_xplained_mmc_defconfig
index dabbf605c5a928b5bb01ecd9e30cd8d1cf12de48..8ecba5b7d4fd533ae6d116754863f190ffcfd78b 100644
--- a/configs/sama5d4_xplained_mmc_defconfig
+++ b/configs/sama5d4_xplained_mmc_defconfig
@@ -78,3 +78,5 @@ CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_ATMEL_USBA=y
+CONFIG_DM_VIDEO=y
+CONFIG_ATMEL_HLCD=y
diff --git a/configs/sama5d4_xplained_nandflash_defconfig b/configs/sama5d4_xplained_nandflash_defconfig
index 85157878cdab5962b236d1f3bac5569cb71bdd66..bd3131f4cc09bf63c397a41f9434348da64edfab 100644
--- a/configs/sama5d4_xplained_nandflash_defconfig
+++ b/configs/sama5d4_xplained_nandflash_defconfig
@@ -75,3 +75,5 @@ CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_ATMEL_USBA=y
+CONFIG_DM_VIDEO=y
+CONFIG_ATMEL_HLCD=y
diff --git a/configs/sama5d4_xplained_spiflash_defconfig b/configs/sama5d4_xplained_spiflash_defconfig
index 4061720b3a835a43696c7db9819f67e17f7d65ae..d37be67eb664cf3280e440f3ac9b29b2f92fd300 100644
--- a/configs/sama5d4_xplained_spiflash_defconfig
+++ b/configs/sama5d4_xplained_spiflash_defconfig
@@ -77,3 +77,5 @@ CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_ATMEL_USBA=y
+CONFIG_DM_VIDEO=y
+CONFIG_ATMEL_HLCD=y
diff --git a/configs/sama5d4ek_mmc_defconfig b/configs/sama5d4ek_mmc_defconfig
index aaa5855b220617e9dc6d55787ebaecedb352949b..7367b6cb7a01b10a83355484804f3b5fa611ddef 100644
--- a/configs/sama5d4ek_mmc_defconfig
+++ b/configs/sama5d4ek_mmc_defconfig
@@ -78,4 +78,5 @@ CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_ATMEL_USBA=y
-CONFIG_LCD=y
+CONFIG_DM_VIDEO=y
+CONFIG_ATMEL_HLCD=y
diff --git a/configs/sama5d4ek_nandflash_defconfig b/configs/sama5d4ek_nandflash_defconfig
index 901d17bfa337f50c1a40491cb866fe7d8d7bebd1..94970c6e7fd530d6f0c512523f02126caeabc550 100644
--- a/configs/sama5d4ek_nandflash_defconfig
+++ b/configs/sama5d4ek_nandflash_defconfig
@@ -75,4 +75,5 @@ CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_ATMEL_USBA=y
-CONFIG_LCD=y
+CONFIG_DM_VIDEO=y
+CONFIG_ATMEL_HLCD=y
diff --git a/configs/sama5d4ek_spiflash_defconfig b/configs/sama5d4ek_spiflash_defconfig
index 535031024b31f3ddc2afac67d764ef1cc42113db..160ed127bdfa74adefc61fee48dedc271e3574b4 100644
--- a/configs/sama5d4ek_spiflash_defconfig
+++ b/configs/sama5d4ek_spiflash_defconfig
@@ -74,4 +74,5 @@ CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_ATMEL_USBA=y
-CONFIG_LCD=y
+CONFIG_DM_VIDEO=y
+CONFIG_ATMEL_HLCD=y
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 7ba7b580db1158f5ee4acaa8b004f603e7519efe..e6b7f11dc9d33401a3fefdfd49a59b0e4066d2b6 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -65,6 +65,14 @@ config VIDEO_BPP32
this option, such displays will not be supported and console output
will be empty.
+config VIDEO_ANSI
+ bool "Support ANSI escape sequences in video console"
+ depends on DM_VIDEO
+ default y if DM_VIDEO
+ help
+ Enable ANSI escape sequence decoding for a more fully functional
+ console.
+
config CONSOLE_NORMAL
bool "Support a simple text console"
depends on DM_VIDEO
diff --git a/drivers/video/vidconsole-uclass.c b/drivers/video/vidconsole-uclass.c
index b5afd72227c7a6460cc5c5c0a268d93f84d990b0..5f63c12d6c5924bf19c72234abb06f57fcecb8ab 100644
--- a/drivers/video/vidconsole-uclass.c
+++ b/drivers/video/vidconsole-uclass.c
@@ -9,6 +9,7 @@
*/
#include <common.h>
+#include <linux/ctype.h>
#include <dm.h>
#include <video.h>
#include <video_console.h>
@@ -107,12 +108,213 @@ static void vidconsole_newline(struct udevice *dev)
video_sync(dev->parent);
}
+static const struct {
+ unsigned r;
+ unsigned g;
+ unsigned b;
+} colors[] = {
+ { 0x00, 0x00, 0x00 }, /* black */
+ { 0xff, 0x00, 0x00 }, /* red */
+ { 0x00, 0xff, 0x00 }, /* green */
+ { 0xff, 0xff, 0x00 }, /* yellow */
+ { 0x00, 0x00, 0xff }, /* blue */
+ { 0xff, 0x00, 0xff }, /* magenta */
+ { 0x00, 0xff, 0xff }, /* cyan */
+ { 0xff, 0xff, 0xff }, /* white */
+};
+
+static void set_color(struct video_priv *priv, unsigned idx, unsigned *c)
+{
+ switch (priv->bpix) {
+ case VIDEO_BPP16:
+ *c = ((colors[idx].r >> 3) << 0) |
+ ((colors[idx].g >> 2) << 5) |
+ ((colors[idx].b >> 3) << 11);
+ break;
+ case VIDEO_BPP32:
+ *c = 0xff000000 |
+ (colors[idx].r << 0) |
+ (colors[idx].g << 8) |
+ (colors[idx].b << 16);
+ break;
+ default:
+ /* unsupported, leave current color in place */
+ break;
+ }
+}
+
+static char *parsenum(char *s, int *num)
+{
+ char *end;
+ *num = simple_strtol(s, &end, 10);
+ return end;
+}
+
+/*
+ * Process a character while accumulating an escape string. Chars are
+ * accumulated into escape_buf until the end of escape sequence is
+ * found, at which point the sequence is parsed and processed.
+ */
+static void vidconsole_escape_char(struct udevice *dev, char ch)
+{
+ struct vidconsole_priv *priv = dev_get_uclass_priv(dev);
+
+ if (!IS_ENABLED(CONFIG_VIDEO_ANSI))
+ goto error;
+
+ /* Sanity checking for bogus ESC sequences: */
+ if (priv->escape_len >= sizeof(priv->escape_buf))
+ goto error;
+ if (priv->escape_len == 0 && ch != '[')
+ goto error;
+
+ priv->escape_buf[priv->escape_len++] = ch;
+
+ /*
+ * Escape sequences are terminated by a letter, so keep
+ * accumulating until we get one:
+ */
+ if (!isalpha(ch))
+ return;
+
+ /*
+ * clear escape mode first, otherwise things will get highly
+ * surprising if you hit any debug prints that come back to
+ * this console.
+ */
+ priv->escape = 0;
+
+ switch (ch) {
+ case 'H':
+ case 'f': {
+ int row, col;
+ char *s = priv->escape_buf;
+
+ /*
+ * Set cursor position: [%d;%df or [%d;%dH
+ */
+ s++; /* [ */
+ s = parsenum(s, &row);
+ s++; /* ; */
+ s = parsenum(s, &col);
+
+ priv->ycur = row * priv->y_charsize;
+ priv->xcur_frac = priv->xstart_frac +
+ VID_TO_POS(col * priv->x_charsize);
+
+ break;
+ }
+ case 'J': {
+ int mode;
+
+ /*
+ * Clear part/all screen:
+ * [J or [0J - clear screen from cursor down
+ * [1J - clear screen from cursor up
+ * [2J - clear entire screen
+ *
+ * TODO we really only handle entire-screen case, others
+ * probably require some additions to video-uclass (and
+ * are not really needed yet by efi_console)
+ */
+ parsenum(priv->escape_buf + 1, &mode);
+
+ if (mode == 2) {
+ video_clear(dev->parent);
+ video_sync(dev->parent);
+ priv->ycur = 0;
+ priv->xcur_frac = priv->xstart_frac;
+ } else {
+ debug("unsupported clear mode: %d\n", mode);
+ }
+ break;
+ }
+ case 'm': {
+ struct video_priv *vid_priv = dev_get_uclass_priv(dev->parent);
+ char *s = priv->escape_buf;
+ char *end = &priv->escape_buf[priv->escape_len];
+
+ /*
+ * Set graphics mode: [%d;...;%dm
+ *
+ * Currently only supports the color attributes:
+ *
+ * Foreground Colors:
+ *
+ * 30 Black
+ * 31 Red
+ * 32 Green
+ * 33 Yellow
+ * 34 Blue
+ * 35 Magenta
+ * 36 Cyan
+ * 37 White
+ *
+ * Background Colors:
+ *
+ * 40 Black
+ * 41 Red
+ * 42 Green
+ * 43 Yellow
+ * 44 Blue
+ * 45 Magenta
+ * 46 Cyan
+ * 47 White
+ */
+
+ s++; /* [ */
+ while (s < end) {
+ int val;
+
+ s = parsenum(s, &val);
+ s++;
+
+ switch (val) {
+ case 30 ... 37:
+ /* fg color */
+ set_color(vid_priv, val - 30,
+ (unsigned *)&vid_priv->colour_fg);
+ break;
+ case 40 ... 47:
+ /* bg color */
+ set_color(vid_priv, val - 40,
+ (unsigned *)&vid_priv->colour_bg);
+ break;
+ default:
+ /* unknown/unsupported */
+ break;
+ }
+ }
+
+ break;
+ }
+ default:
+ debug("unrecognized escape sequence: %*s\n",
+ priv->escape_len, priv->escape_buf);
+ }
+
+ return;
+
+error:
+ /* something went wrong, just revert to normal mode: */
+ priv->escape = 0;
+}
+
int vidconsole_put_char(struct udevice *dev, char ch)
{
struct vidconsole_priv *priv = dev_get_uclass_priv(dev);
int ret;
+ if (priv->escape) {
+ vidconsole_escape_char(dev, ch);
+ return 0;
+ }
+
switch (ch) {
+ case '\x1b':
+ priv->escape_len = 0;
+ priv->escape = 1;
+ break;
case '\a':
/* beep */
break;
@@ -163,6 +365,7 @@ static void vidconsole_putc(struct stdio_dev *sdev, const char ch)
struct udevice *dev = sdev->priv;
vidconsole_put_char(dev, ch);
+ video_sync(dev->parent);
}
static void vidconsole_puts(struct stdio_dev *sdev, const char *s)
@@ -260,6 +463,8 @@ static int do_video_puts(cmd_tbl_t *cmdtp, int flag, int argc,
for (s = argv[1]; *s; s++)
vidconsole_put_char(dev, *s);
+ video_sync(dev->parent);
+
return 0;
}
diff --git a/drivers/video/video-uclass.c b/drivers/video/video-uclass.c
index dfa39b0d1b893ad774e0fa35bb57760b34bf8973..dcaceed42c4e66821133fad83136c9aaf1b78b69 100644
--- a/drivers/video/video-uclass.c
+++ b/drivers/video/video-uclass.c
@@ -87,7 +87,7 @@ int video_reserve(ulong *addrp)
return 0;
}
-static int video_clear(struct udevice *dev)
+void video_clear(struct udevice *dev)
{
struct video_priv *priv = dev_get_uclass_priv(dev);
@@ -100,8 +100,6 @@ static int video_clear(struct udevice *dev)
} else {
memset(priv->fb, priv->colour_bg, priv->fb_size);
}
-
- return 0;
}
/* Flush video activity to the caches */
diff --git a/include/configs/at91sam9x5ek.h b/include/configs/at91sam9x5ek.h
index 1d4971c59f9da21436e1e1992546d1b646700b89..9450784521dd05e57ca88bcaee775cc5eaf93103 100644
--- a/include/configs/at91sam9x5ek.h
+++ b/include/configs/at91sam9x5ek.h
@@ -23,16 +23,6 @@
/* general purpose I/O */
#define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */
-/* LCD */
-#define LCD_BPP LCD_COLOR16
-#define LCD_OUTPUT_BPP 24
-#define CONFIG_LCD_LOGO
-#define CONFIG_LCD_INFO
-#define CONFIG_LCD_INFO_BELOW_LOGO
-#define CONFIG_ATMEL_HLCD
-#define CONFIG_ATMEL_LCD_RGB565
-
-
/*
* BOOTP options
*/
diff --git a/include/configs/sama5d2_xplained.h b/include/configs/sama5d2_xplained.h
index 4f24a56899a982caed671cf5d656ada8a3fa4cee..545ba1740de8a5a7efa7e4fb778b45d53ad931b7 100644
--- a/include/configs/sama5d2_xplained.h
+++ b/include/configs/sama5d2_xplained.h
@@ -35,18 +35,6 @@
#define CONFIG_SF_DEFAULT_SPEED 30000000
#endif
-/* LCD */
-
-#ifdef CONFIG_LCD
-#define LCD_BPP LCD_COLOR16
-#define LCD_OUTPUT_BPP 24
-#define CONFIG_LCD_LOGO
-#define CONFIG_LCD_INFO
-#define CONFIG_LCD_INFO_BELOW_LOGO
-#define CONFIG_ATMEL_HLCD
-#define CONFIG_ATMEL_LCD_RGB565
-#endif
-
#ifdef CONFIG_SD_BOOT
/* bootstrap + u-boot + env in sd card */
diff --git a/include/configs/sama5d3xek.h b/include/configs/sama5d3xek.h
index bd93a1e84c37aaff8eabf9e2877ac9b7eef9490c..9ec1e76052685855713fc27d0b0b1ec7fd57a11e 100644
--- a/include/configs/sama5d3xek.h
+++ b/include/configs/sama5d3xek.h
@@ -28,15 +28,6 @@
*/
#define ATMEL_PMC_UHP (1 << 6)
-/* LCD */
-#define LCD_BPP LCD_COLOR16
-#define LCD_OUTPUT_BPP 24
-#define CONFIG_LCD_LOGO
-#define CONFIG_LCD_INFO
-#define CONFIG_LCD_INFO_BELOW_LOGO
-#define CONFIG_ATMEL_HLCD
-#define CONFIG_ATMEL_LCD_RGB565
-
/* board specific (not enough SRAM) */
#define CONFIG_SAMA5D3_LCD_BASE 0x23E00000
diff --git a/include/configs/sama5d4_xplained.h b/include/configs/sama5d4_xplained.h
index 5dc5e7dd0c575415ff9e7bc835a8d6a39fc77dd2..6aa4bcc5c55e10b5fbab0343915b99a74cc019f1 100644
--- a/include/configs/sama5d4_xplained.h
+++ b/include/configs/sama5d4_xplained.h
@@ -47,17 +47,6 @@
#define CONFIG_ATMEL_NAND_HW_PMECC
#endif
-/* LCD */
-#ifdef CONFIG_LCD
-#define LCD_BPP LCD_COLOR16
-#define LCD_OUTPUT_BPP 24
-#define CONFIG_LCD_LOGO
-#define CONFIG_LCD_INFO
-#define CONFIG_LCD_INFO_BELOW_LOGO
-#define CONFIG_ATMEL_HLCD
-#define CONFIG_ATMEL_LCD_RGB565
-#endif
-
/* SPL */
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_TEXT_BASE 0x200000
diff --git a/include/configs/sama5d4ek.h b/include/configs/sama5d4ek.h
index 94e8e893c0619782f8700a74f59dffc3b9ebcf3a..a46e3508bf5a1ec690a946fc390711d91204633c 100644
--- a/include/configs/sama5d4ek.h
+++ b/include/configs/sama5d4ek.h
@@ -45,15 +45,6 @@
#define CONFIG_ATMEL_NAND_HW_PMECC
#endif
-/* LCD */
-#define LCD_BPP LCD_COLOR16
-#define LCD_OUTPUT_BPP 18
-#define CONFIG_LCD_LOGO
-#define CONFIG_LCD_INFO
-#define CONFIG_LCD_INFO_BELOW_LOGO
-#define CONFIG_ATMEL_HLCD
-#define CONFIG_ATMEL_LCD_RGB565
-
/* SPL */
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_TEXT_BASE 0x200000
diff --git a/include/video.h b/include/video.h
index 5b4e78b18257b40805ff3e84ddb3fec52ac14186..61ff6531215aca9b083431f1c800f4ce222ea830 100644
--- a/include/video.h
+++ b/include/video.h
@@ -114,6 +114,13 @@ struct video_ops {
*/
int video_reserve(ulong *addrp);
+/**
+ * video_clear() - Clear a device's frame buffer to background color.
+ *
+ * @dev: Device to clear
+ */
+void video_clear(struct udevice *dev);
+
/**
* video_sync() - Sync a device's frame buffer with its hardware
*
diff --git a/include/video_console.h b/include/video_console.h
index 26047934da8c59b4646caa6cb9f8a631d1ce0561..9dce234bd928cf24372532c0923f868f44b1a326 100644
--- a/include/video_console.h
+++ b/include/video_console.h
@@ -29,6 +29,9 @@
* @xsize_frac: Width of the display in fractional units
* @xstart_frac: Left margin for the text console in fractional units
* @last_ch: Last character written to the text console on this line
+ * @escape: TRUE if currently accumulating an ANSI escape sequence
+ * @escape_len: Length of accumulated escape sequence so far
+ * @escape_buf: Buffer to accumulate escape sequence
*/
struct vidconsole_priv {
struct stdio_dev sdev;
@@ -42,6 +45,14 @@ struct vidconsole_priv {
int xsize_frac;
int xstart_frac;
int last_ch;
+ /*
+ * ANSI escape sequences are accumulated character by character,
+ * starting after the ESC char (0x1b) until the entire sequence
+ * is consumed at which point it is acted upon.
+ */
+ int escape;
+ int escape_len;
+ char escape_buf[32];
};
/**
diff --git a/test/dm/video.c b/test/dm/video.c
index 4d000fa1bea5b41681b763b0dd318dd52d6f4afd..29917d0c2d831beaf2387db1cfd9d5651f999af2 100644
--- a/test/dm/video.c
+++ b/test/dm/video.c
@@ -100,6 +100,14 @@ static int select_vidconsole(struct unit_test_state *uts, const char *drv_name)
return 0;
}
+static void vidconsole_put_string(struct udevice *dev, const char *str)
+{
+ const char *s;
+
+ for (s = str; *s; s++)
+ vidconsole_put_char(dev, *s);
+}
+
/* Test text output works on the video console */
static int dm_test_video_text(struct unit_test_state *uts)
{
@@ -140,19 +148,51 @@ static int dm_test_video_chars(struct unit_test_state *uts)
{
struct udevice *dev, *con;
const char *test_string = "Well\b\b\b\bxhe is\r \n\ta very \amodest \bman\n\t\tand Has much to\b\bto be modest about.";
- const char *s;
ut_assertok(select_vidconsole(uts, "vidconsole0"));
ut_assertok(uclass_get_device(UCLASS_VIDEO, 0, &dev));
ut_assertok(uclass_get_device(UCLASS_VIDEO_CONSOLE, 0, &con));
- for (s = test_string; *s; s++)
- vidconsole_put_char(con, *s);
+ vidconsole_put_string(con, test_string);
ut_asserteq(466, compress_frame_buffer(dev));
return 0;
}
DM_TEST(dm_test_video_chars, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT);
+#ifdef CONFIG_VIDEO_ANSI
+#define ANSI_ESC "\x1b"
+/* Test handling of ANSI escape sequences */
+static int dm_test_video_ansi(struct unit_test_state *uts)
+{
+ struct udevice *dev, *con;
+
+ ut_assertok(select_vidconsole(uts, "vidconsole0"));
+ ut_assertok(uclass_get_device(UCLASS_VIDEO, 0, &dev));
+ ut_assertok(uclass_get_device(UCLASS_VIDEO_CONSOLE, 0, &con));
+
+ /* reference clear: */
+ video_clear(con->parent);
+ video_sync(con->parent);
+ ut_asserteq(46, compress_frame_buffer(dev));
+
+ /* test clear escape sequence: [2J */
+ vidconsole_put_string(con, "A\tB\tC"ANSI_ESC"[2J");
+ ut_asserteq(46, compress_frame_buffer(dev));
+
+ /* test set-cursor: [%d;%df */
+ vidconsole_put_string(con, "abc"ANSI_ESC"[2;2fab"ANSI_ESC"[4;4fcd");
+ ut_asserteq(142, compress_frame_buffer(dev));
+
+ /* test colors (30-37 fg color, 40-47 bg color) */
+ vidconsole_put_string(con, ANSI_ESC"[30;41mfoo"); /* black on red */
+ vidconsole_put_string(con, ANSI_ESC"[33;44mbar"); /* yellow on blue */
+ ut_asserteq(268, compress_frame_buffer(dev));
+
+ return 0;
+}
+DM_TEST(dm_test_video_ansi, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT);
+#endif
+
/**
* check_vidconsole_output() - Run a text console test
*
@@ -294,12 +334,10 @@ static int dm_test_video_truetype(struct unit_test_state *uts)
{
struct udevice *dev, *con;
const char *test_string = "Criticism may not be agreeable, but it is necessary. It fulfils the same function as pain in the human body. It calls attention to an unhealthy state of things. Some see private enterprise as a predatory target to be shot, others as a cow to be milked, but few are those who see it as a sturdy horse pulling the wagon. The \aprice OF\b\bof greatness\n\tis responsibility.\n\nBye";
- const char *s;
ut_assertok(uclass_get_device(UCLASS_VIDEO, 0, &dev));
ut_assertok(uclass_get_device(UCLASS_VIDEO_CONSOLE, 0, &con));
- for (s = test_string; *s; s++)
- vidconsole_put_char(con, *s);
+ vidconsole_put_string(con, test_string);
ut_asserteq(12619, compress_frame_buffer(dev));
return 0;
@@ -312,7 +350,6 @@ static int dm_test_video_truetype_scroll(struct unit_test_state *uts)
struct sandbox_sdl_plat *plat;
struct udevice *dev, *con;
const char *test_string = "Criticism may not be agreeable, but it is necessary. It fulfils the same function as pain in the human body. It calls attention to an unhealthy state of things. Some see private enterprise as a predatory target to be shot, others as a cow to be milked, but few are those who see it as a sturdy horse pulling the wagon. The \aprice OF\b\bof greatness\n\tis responsibility.\n\nBye";
- const char *s;
ut_assertok(uclass_find_device(UCLASS_VIDEO, 0, &dev));
ut_assert(!device_active(dev));
@@ -321,8 +358,7 @@ static int dm_test_video_truetype_scroll(struct unit_test_state *uts)
ut_assertok(uclass_get_device(UCLASS_VIDEO, 0, &dev));
ut_assertok(uclass_get_device(UCLASS_VIDEO_CONSOLE, 0, &con));
- for (s = test_string; *s; s++)
- vidconsole_put_char(con, *s);
+ vidconsole_put_string(con, test_string);
ut_asserteq(33849, compress_frame_buffer(dev));
return 0;
@@ -335,7 +371,6 @@ static int dm_test_video_truetype_bs(struct unit_test_state *uts)
struct sandbox_sdl_plat *plat;
struct udevice *dev, *con;
const char *test_string = "...Criticism may or may\b\b\b\b\b\bnot be agreeable, but seldom it is necessary\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\bit is necessary. It fulfils the same function as pain in the human body. It calls attention to an unhealthy state of things.";
- const char *s;
ut_assertok(uclass_find_device(UCLASS_VIDEO, 0, &dev));
ut_assert(!device_active(dev));
@@ -344,8 +379,7 @@ static int dm_test_video_truetype_bs(struct unit_test_state *uts)
ut_assertok(uclass_get_device(UCLASS_VIDEO, 0, &dev));
ut_assertok(uclass_get_device(UCLASS_VIDEO_CONSOLE, 0, &con));
- for (s = test_string; *s; s++)
- vidconsole_put_char(con, *s);
+ vidconsole_put_string(con, test_string);
ut_asserteq(34871, compress_frame_buffer(dev));
return 0;