diff --git a/CHANGELOG b/CHANGELOG
index c3b6848d3c0ccea6e597fc584537b2caac961ec2..b0ff46e58300ea33247f0c5b1589b185921d3772 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,6 +2,33 @@
Changes for U-Boot 1.1.3:
======================================================================
+* Update AMCC Yosemite to get a consistent setup for all AMCC eval
+ boards (baudrate, environment...). Flash driver fixed.
+ Patch by Stefan Roese, 11 Aug 2005
+
+* Changed AMCC Bubinga (405EP) configuration to support 2nd eth port
+ Patch by Stefan Roese, 11 Aug 2005
+
+* Add NAND FLASH support for AMCC Bamboo 440EP eval board
+ Patch by Stefan Roese, 11 Aug 2005
+
+* Add configuration for IFM AEV FIFO board.
+ Minor coding style cleanup.
+
+* Add configuration for IFM SPI eval board
+
+* Fix CompactFlash problem on HMI1001 board
+
+* Make new "mtdparts" code build with older compilers
+ Patch by Andrea Scian, 09 Aug 2005
+
+* Changed CONFIG_440_GX, CONFIG_440_EP and CONFIG_440_GR options to
+ CONFIG_44GX, CONFIG_440EP and CONFIG_440GR for a consistent design
+ with the 405 defines and the linux kernel defines.
+ Patch by Stefan Roese, 08 Aug 2005
+
+* Fix compiler warnings with older GCC versions
+
* Add common (with Linux) MTD partition scheme and "mtdparts" command
Old, obsolete and duplicated code was cleaned up and replace by the
@@ -34,13 +61,13 @@ Changes for U-Boot 1.1.3:
* Fix errors that occur when accessing SystemACE CF
Patch by Jeff Angielski, 09 Jan 2005
-
+
* Document switching between U-Boot and PlanetCore on RPXlite
by Sam Song, 24 Dec 2004
* Fix PowerQUICC II mask detection.
Patch by Eugene Surovegin, 20 Dec 2004
-
+
* Add support for Altera NIOS DK1C20 board
Patch by Shlomo Kut, 13 Dec 2004
diff --git a/Makefile b/Makefile
index d9d0a404d408a5d2ef4aad4cadb747a48ebe3840..12c0e84d4e2c4c3a104aa6421133d529de766952 100644
--- a/Makefile
+++ b/Makefile
@@ -231,6 +231,9 @@ PATI_config: unconfig
## MPC5xxx Systems
#########################################################################
+aev_config: unconfig
+ @./mkconfig -a aev ppc mpc5xxx tqm5200
+
hmi1001_config: unconfig
@./mkconfig hmi1001 ppc mpc5xxx hmi1001
@@ -357,6 +360,11 @@ MiniFAP_config: unconfig
}
@./mkconfig -a TQM5200 ppc mpc5xxx tqm5200
+spieval_config: unconfig
+ echo "#define CONFIG_CS_AUTOCONF">>include/config.h
+ echo "... with automatic CS configuration"
+ @./mkconfig -a spieval ppc mpc5xxx tqm5200
+
#########################################################################
## MPC8xx Systems
#########################################################################
diff --git a/board/amcc/bamboo/bamboo.c b/board/amcc/bamboo/bamboo.c
index 0d5ab710d480b650882b0f40c74dc39c2fcd7c05..d02add5723e6f5e6d0bbca40faf9cdd6da3f0323 100644
--- a/board/amcc/bamboo/bamboo.c
+++ b/board/amcc/bamboo/bamboo.c
@@ -29,6 +29,7 @@
void ext_bus_cntlr_init(void);
void configure_ppc440ep_pins(void);
+int is_nand_selected(void);
gpio_param_s gpio_tab[GPIO_GROUP_MAX][GPIO_MAX];
#if 0
@@ -132,10 +133,10 @@ gpio_param_s gpio_tab[GPIO_GROUP_MAX][GPIO_MAX];
EBC0_BNCR_BW_8BIT
#define EBC0_BNCR_SMALL_FLASH_CS4 \
- EBC0_BNCR_BAS_ENCODE(0x87800000) | \
- EBC0_BNCR_BS_8MB | \
+ EBC0_BNCR_BAS_ENCODE(0x87F00000) | \
+ EBC0_BNCR_BS_1MB | \
EBC0_BNCR_BU_RW | \
- EBC0_BNCR_BW_16BIT
+ EBC0_BNCR_BW_8BIT
/* Large Flash or SRAM */
#define EBC0_BNAP_LARGE_FLASH_OR_SRAM \
@@ -273,6 +274,87 @@ int board_early_init_f(void)
return 0;
}
+#if (CONFIG_COMMANDS & CFG_CMD_NAND)
+#include <linux/mtd/nand.h>
+extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE];
+
+/*----------------------------------------------------------------------------+
+ | nand_reset.
+ | Reset Nand flash
+ | This routine will abort previous cmd
+ +----------------------------------------------------------------------------*/
+int nand_reset(ulong addr)
+{
+ int wait=0, stat=0;
+
+ out8(addr + NAND_CMD_REG, NAND0_CMD_RESET);
+ out8(addr + NAND_CMD_REG, NAND0_CMD_READ_STATUS);
+
+ while ((stat != 0xc0) && (wait != 0xffff)) {
+ stat = in8(addr + NAND_DATA_REG);
+ wait++;
+ }
+
+ if (stat == 0xc0) {
+ return 0;
+ } else {
+ printf("NAND Reset timeout.\n");
+ return -1;
+ }
+}
+
+void board_nand_set_device(int cs, ulong addr)
+{
+ /* Set NandFlash Core Configuration Register */
+ out32(addr + NAND_CCR_REG, 0x00001000 | (cs << 24));
+
+ switch (cs) {
+ case 1:
+ /* -------
+ * NAND0
+ * -------
+ * K9F1208U0A : 4 addr cyc, 1 col + 3 Row
+ * Set NDF1CR - Enable External CS1 in NAND FLASH controller
+ */
+ out32(addr + NAND_CR1_REG, 0x80002222);
+ break;
+
+ case 2:
+ /* -------
+ * NAND1
+ * -------
+ * K9K2G0B : 5 addr cyc, 2 col + 3 Row
+ * Set NDF2CR : Enable External CS2 in NAND FLASH controller
+ */
+ out32(addr + NAND_CR2_REG, 0xC0007777);
+ break;
+ }
+
+ /* Perform Reset Command */
+ if (nand_reset(addr) != 0)
+ return;
+}
+
+void nand_init(void)
+{
+ board_nand_set_device(1, CFG_NAND_ADDR);
+
+ nand_probe(CFG_NAND_ADDR);
+ if (nand_dev_desc[0].ChipID != NAND_ChipID_UNKNOWN) {
+ print_size(nand_dev_desc[0].totlen, "\n");
+ }
+
+#if 0 /* NAND1 not supported yet */
+ board_nand_set_device(2, CFG_NAND2_ADDR);
+
+ nand_probe(CFG_NAND2_ADDR);
+ if (nand_dev_desc[0].ChipID != NAND_ChipID_UNKNOWN) {
+ print_size(nand_dev_desc[0].totlen, "\n");
+ }
+#endif
+}
+#endif /* (CONFIG_COMMANDS & CFG_CMD_NAND) */
+
int checkboard(void)
{
sys_info_t sysinfo;
@@ -585,7 +667,11 @@ int is_powerpc440ep_pass1(void)
+----------------------------------------------------------------------------*/
int is_nand_selected(void)
{
- return FALSE; /* test-only */
+#ifdef CONFIG_BAMBOO_NAND
+ return TRUE;
+#else
+ return FALSE;
+#endif
}
/*----------------------------------------------------------------------------+
@@ -829,12 +915,8 @@ void ext_bus_cntlr_init(void)
/* NAND Flash */
ebc0_cs1_bnap_value = EBC0_BNAP_NAND_FLASH;
ebc0_cs1_bncr_value = EBC0_BNCR_NAND_FLASH_CS1;
- /*ebc0_cs2_bnap_value = EBC0_BNAP_NAND_FLASH;
- ebc0_cs2_bncr_value = EBC0_BNCR_NAND_FLASH_CS2;
- ebc0_cs3_bnap_value = EBC0_BNAP_NAND_FLASH;
- ebc0_cs3_bncr_value = EBC0_BNCR_NAND_FLASH_CS3;*/
- ebc0_cs2_bnap_value = 0;
- ebc0_cs2_bncr_value = 0;
+ ebc0_cs2_bnap_value = EBC0_BNAP_NAND_FLASH;
+ ebc0_cs2_bncr_value = EBC0_BNCR_NAND_FLASH_CS2;
ebc0_cs3_bnap_value = 0;
ebc0_cs3_bncr_value = 0;
} else {
@@ -985,7 +1067,7 @@ void ext_bus_cntlr_init(void)
+----------------------------------------------------------------------------*/
uart_config_nb_t get_uart_configuration(void)
{
- return (L4); /* test-only */
+ return (L4);
}
/*----------------------------------------------------------------------------+
@@ -1132,8 +1214,7 @@ void ndfc_selection_in_fpga(void)
fpga_selection_1_reg = in8(FPGA_SELECTION_1_REG) &~FPGA_SEL_1_REG_NF_SELEC_MASK;
fpga_selection_1_reg |= FPGA_SEL_1_REG_NF0_SEL_BY_NFCS1;
- /*fpga_selection_1_reg |= FPGA_SEL_1_REG_NF1_SEL_BY_NFCS2; */
- /*fpga_selection_1_reg |= FPGA_SEL_1_REG_NF1_SEL_BY_NFCS3; */
+ fpga_selection_1_reg |= FPGA_SEL_1_REG_NF1_SEL_BY_NFCS2;
out8(FPGA_SELECTION_1_REG,fpga_selection_1_reg);
}
@@ -1725,11 +1806,15 @@ void force_bup_core_selection(core_selection_t *core_select_P, config_validity_t
*(core_select_P+UIC_0_3) = CORE_SELECTED;
*(core_select_P+UIC_4_9) = CORE_SELECTED;
- *(core_select_P+SCP_CORE) = CORE_SELECTED;
- *(core_select_P+DMA_CHANNEL_CD) = CORE_SELECTED;
- *(core_select_P+PACKET_REJ_FUNC_AVAIL) = CORE_SELECTED;
+ *(core_select_P+SCP_CORE) = CORE_SELECTED;
+ *(core_select_P+DMA_CHANNEL_CD) = CORE_SELECTED;
+ *(core_select_P+PACKET_REJ_FUNC_AVAIL) = CORE_SELECTED;
*(core_select_P+USB1_DEVICE) = CORE_SELECTED;
+ if (is_nand_selected()) {
+ *(core_select_P+NAND_FLASH) = CORE_SELECTED;
+ }
+
*config_val_P = CONFIG_IS_VALID;
}
@@ -1901,9 +1986,8 @@ void configure_ppc440ep_pins(void)
SDR0_CUST0_NDFC_ENABLE |
SDR0_CUST0_NDFC_BW_8_BIT |
SDR0_CUST0_NDFC_ARE_MASK |
- SDR0_CUST0_CHIPSELGAT_EN1 );
- /*SDR0_CUST0_CHIPSELGAT_EN2 ); */
- /*SDR0_CUST0_CHIPSELGAT_EN3 ); */
+ SDR0_CUST0_CHIPSELGAT_EN1 |
+ SDR0_CUST0_CHIPSELGAT_EN2);
ndfc_selection_in_fpga();
}
diff --git a/board/amcc/bamboo/flash.c b/board/amcc/bamboo/flash.c
index 97a4b988d54449eb04fced8cddfd2dff47b2a596..a30ab7ada8f2a2e7ed9316ed73ea1aad89179213 100644
--- a/board/amcc/bamboo/flash.c
+++ b/board/amcc/bamboo/flash.c
@@ -50,15 +50,16 @@ flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
/*
* Mark big flash bank (16 bit instead of 8 bit access) in address with bit 0
*/
-static unsigned long flash_addr_table[8][CFG_MAX_FLASH_BANKS] = {
+static unsigned long flash_addr_table[][CFG_MAX_FLASH_BANKS] = {
{0x87800001, 0xFFF00000, 0xFFF80000}, /* 0:boot from small flash */
{0x00000000, 0x00000000, 0x00000000}, /* 1:boot from pci 66 */
{0x00000000, 0x00000000, 0x00000000}, /* 2:boot from nand flash */
- {0x87800000, 0x87880000, 0xFF800001}, /* 3:boot from big flash 33*/
- {0x87800000, 0x87880000, 0xFF800001}, /* 4:boot from big flash 66*/
+ {0x87F00000, 0x87F80000, 0xFFC00001}, /* 3:boot from big flash 33*/
+ {0x87F00000, 0x87F80000, 0xFFC00001}, /* 4:boot from big flash 66*/
{0x00000000, 0x00000000, 0x00000000}, /* 5:boot from */
{0x00000000, 0x00000000, 0x00000000}, /* 6:boot from pci 66 */
{0x00000000, 0x00000000, 0x00000000}, /* 7:boot from */
+ {0x87C00001, 0xFFF00000, 0xFFF80000}, /* 0:boot from small flash */
};
/*
@@ -117,6 +118,10 @@ unsigned long flash_init(void)
index = 2;
break;
}
+ } else if (index == 0) {
+ if (in8(FPGA_SETTING_REG) & FPGA_SET_REG_OP_CODE_FLASH_ABOVE) {
+ index = 8; /* sram below op code flash -> new index 8 */
+ }
}
DEBUGF("\n");
diff --git a/board/amcc/bamboo/init.S b/board/amcc/bamboo/init.S
index 907029345b0f2519ef05e7a0959958d321b8afca..7820107aa5a1ff38d8db02ac2cf713d18311c77c 100644
--- a/board/amcc/bamboo/init.S
+++ b/board/amcc/bamboo/init.S
@@ -86,14 +86,20 @@
tlbtab:
tlbtab_start
- /*
- 0xf0000000 must be first, before relocation SA_I must be off to use the
- dcache as stack. It is patched after relocation to enable SA_I
- */
- tlbentry( 0xf0000000, SZ_256M, 0xf0000000, 0, AC_R|AC_W|AC_X|SA_G/*|SA_I*/)
- tlbentry( CFG_SDRAM_BASE, SZ_256M, 0x00000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
- tlbentry( CFG_PCI_BASE, SZ_256M, 0xE0000000, 0, AC_R|AC_W|SA_G|SA_I )
- tlbentry( CFG_NVRAM_BASE_ADDR, SZ_256M, 0x80000000, 0, AC_R|AC_W|AC_X|SA_W|SA_I )
+
+ /*
+ * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to use the
+ * speed up boot process. It is patched after relocation to enable SA_I
+ */
+ tlbentry( CFG_BOOT_BASE_ADDR, SZ_256M, CFG_BOOT_BASE_ADDR, 0, AC_R|AC_W|AC_X|SA_G/*|SA_I*/)
+
+ /* TLB-entry for init-ram in dcache (SA_I must be turned off!) */
+ tlbentry( CFG_INIT_RAM_ADDR, SZ_64K, CFG_INIT_RAM_ADDR, 0, AC_R|AC_W|AC_X|SA_G )
+
+ tlbentry( CFG_SDRAM_BASE, SZ_256M, CFG_SDRAM_BASE, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
+ tlbentry( CFG_PCI_BASE, SZ_256M, CFG_PCI_BASE, 0, AC_R|AC_W|SA_G|SA_I )
+ tlbentry( CFG_NVRAM_BASE_ADDR, SZ_256M, CFG_NVRAM_BASE_ADDR, 0, AC_R|AC_W|AC_X|SA_W|SA_I )
+ tlbentry( CFG_NAND_ADDR, SZ_256M, CFG_NAND_ADDR, 0, AC_R|AC_W|AC_X|SA_W|SA_I )
/* PCI */
tlbentry( CFG_PCI_MEMBASE, SZ_256M, CFG_PCI_MEMBASE, 0, AC_R|AC_W|SA_G|SA_I )
@@ -102,6 +108,6 @@ tlbtab:
tlbentry( CFG_PCI_MEMBASE3, SZ_256M, CFG_PCI_MEMBASE3, 0, AC_R|AC_W|SA_G|SA_I )
/* USB 2.0 Device */
- tlbentry( CFG_USB_DEVICE, SZ_1K, 0x50000000, 0, AC_R|AC_W|SA_G|SA_I )
+ tlbentry( CFG_USB_DEVICE, SZ_1K, CFG_USB_DEVICE, 0, AC_R|AC_W|SA_G|SA_I )
tlbtab_end
diff --git a/board/amcc/yosemite/Makefile b/board/amcc/yosemite/Makefile
index 5654f91a83513402b92ca853e836ed08209312b9..47116d3674691a1389f37d6ede0ddedeb3c55420 100644
--- a/board/amcc/yosemite/Makefile
+++ b/board/amcc/yosemite/Makefile
@@ -26,7 +26,6 @@ include $(TOPDIR)/config.mk
LIB = lib$(BOARD).a
OBJS = $(BOARD).o
-OBJS += flash.o
SOBJS = init.o
$(LIB): $(OBJS) $(SOBJS)
diff --git a/board/amcc/yosemite/flash.c b/board/amcc/yosemite/flash.c
deleted file mode 100644
index cd6a2e61e66fdcf72ffda2457f23da00636992d3..0000000000000000000000000000000000000000
--- a/board/amcc/yosemite/flash.c
+++ /dev/null
@@ -1,571 +0,0 @@
-/*
- * (C) Copyright 2002-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2002 Jun Gu <jung@artesyncp.com>
- * Add support for Am29F016D and dynamic switch setting.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * Modified 4/5/2001
- * Wait for completion of each sector erase command issued
- * 4/5/2001
- * Chris Hallinan - DS4.COM, Inc. - clh@net1plus.com
- */
-
-/*
- * Ported to XPedite1000, 1/2 mb boot flash only
- * Travis B. Sawyer, <travis.sawyer@sandburst.com>
- */
-
-#include <common.h>
-#include <ppc4xx.h>
-#include <asm/processor.h>
-
-#undef DEBUG
-#ifdef DEBUG
-#define DEBUGF(x...) printf(x)
-#else
-#define DEBUGF(x...)
-#endif /* DEBUG */
-
-#define BOOT_SMALL_FLASH 32 /* 00100000 */
-#define FLASH_ONBD_N 2 /* 00000010 */
-#define FLASH_SRAM_SEL 1 /* 00000001 */
-
-#define BOOT_SMALL_FLASH_VAL 4
-#define FLASH_ONBD_N_VAL 2
-#define FLASH_SRAM_SEL_VAL 1
-
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
-
-unsigned long flash_addr_table[512][CFG_MAX_FLASH_BANKS] = {
- {0xfe000000}
-
-};
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static ulong flash_get_size(vu_long * addr, flash_info_t * info);
-static int write_word(flash_info_t * info, ulong dest, ulong data);
-
-#define ADDR0 0xaaaa
-#define ADDR1 0x5554
-#define FLASH_WORD_SIZE unsigned short
-
-/*-----------------------------------------------------------------------
- */
-
-unsigned long flash_init(void)
-{
- unsigned long total_b = 0;
- unsigned long size_b[CFG_MAX_FLASH_BANKS];
- unsigned short index = 0;
- int i;
-
- DEBUGF("\n");
- DEBUGF("FLASH: Index: %d\n", index);
-
- /* Init: no FLASHes known */
- for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
- flash_info[i].flash_id = FLASH_UNKNOWN;
- flash_info[i].sector_count = -1;
- flash_info[i].size = 0;
-
- /* check whether the address is 0 */
- if (flash_addr_table[index][i] == 0) {
- continue;
- }
-
- /* call flash_get_size() to initialize sector address */
- size_b[i] = flash_get_size((vu_long *)
- flash_addr_table[index][i],
- &flash_info[i]);
- flash_info[i].size = size_b[i];
- if (flash_info[i].flash_id == FLASH_UNKNOWN) {
- printf
- ("## Unknown FLASH on Bank %d - Size = 0x%08lx = %ld MB\n",
- i, size_b[i], size_b[i] << 20);
- flash_info[i].sector_count = -1;
- flash_info[i].size = 0;
- }
-
- total_b += flash_info[i].size;
- }
-
- /* FLASH protect Monitor */
- flash_protect(FLAG_PROTECT_SET,
- CFG_MONITOR_BASE, 0xFFFFFFFF, &flash_info[0]);
-
- return total_b;
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info(flash_info_t * info)
-{
- int i;
- int k;
- int size;
- int erased;
- volatile unsigned long *flash;
-
- if (info->flash_id == FLASH_UNKNOWN) {
- printf("missing or unknown FLASH type\n");
- return;
- }
-
- switch (info->flash_id & FLASH_VENDMASK) {
- case FLASH_MAN_AMD:
- printf("AMD ");
- break;
- case FLASH_MAN_FUJ:
- printf("FUJITSU ");
- break;
- case FLASH_MAN_SST:
- printf("SST ");
- break;
- default:
- printf("Unknown Vendor ");
- break;
- }
-
- switch (info->flash_id & FLASH_TYPEMASK) {
- case FLASH_AMD016:
- printf("AM29F016D (16 Mbit, uniform sector size)\n");
- break;
- case FLASH_AM040:
- printf("AM29F040 (512 Kbit, uniform sector size)\n");
- break;
- case FLASH_AM400B:
- printf("AM29LV400B (4 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM400T:
- printf("AM29LV400T (4 Mbit, top boot sector)\n");
- break;
- case FLASH_AM800B:
- printf("AM29LV800B (8 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM800T:
- printf("AM29LV800T (8 Mbit, top boot sector)\n");
- break;
- case FLASH_AM160B:
- printf("AM29LV160B (16 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM160T:
- printf("AM29LV160T (16 Mbit, top boot sector)\n");
- break;
- case FLASH_AM320B:
- printf("AM29LV320B (32 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM320T:
- printf("AM29LV320T (32 Mbit, top boot sector)\n");
- break;
- case FLASH_SST800A:
- printf("SST39LF/VF800 (8 Mbit, uniform sector size)\n");
- break;
- case FLASH_SST160A:
- printf("SST39LF/VF160 (16 Mbit, uniform sector size)\n");
- break;
- default:
- printf("Unknown Chip Type\n");
- break;
- }
-
- printf(" Size: %ld KB in %d Sectors\n",
- info->size >> 10, info->sector_count);
-
- printf(" Sector Start Addresses:");
- for (i = 0; i < info->sector_count; ++i) {
- /*
- * Check if whole sector is erased
- */
- if (i != (info->sector_count - 1))
- size = info->start[i + 1] - info->start[i];
- else
- size = info->start[0] + info->size - info->start[i];
- erased = 1;
- flash = (volatile unsigned long *)info->start[i];
- size = size >> 2; /* divide by 4 for longword access */
- for (k = 0; k < size; k++) {
- if (*flash++ != 0xffffffff) {
- erased = 0;
- break;
- }
- }
-
- if ((i % 5) == 0)
- printf("\n ");
- printf(" %08lX%s%s",
- info->start[i],
- erased ? " E" : " ", info->protect[i] ? "RO " : " ");
- }
- printf("\n");
- return;
-}
-
-/*-----------------------------------------------------------------------
- */
-
-/*-----------------------------------------------------------------------
- */
-
-/*
- * The following code cannot be run from FLASH!
- */
-static ulong flash_get_size(vu_long * addr, flash_info_t * info)
-{
- short i;
- FLASH_WORD_SIZE value;
- ulong base = (ulong) addr;
- volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *) addr;
-
- DEBUGF("FLASH ADDR: %08x\n", (unsigned)addr);
-
- /* Write auto select command: read Manufacturer ID */
- udelay(10000);
- *(FLASH_WORD_SIZE *) ((int)addr + ADDR0) = (FLASH_WORD_SIZE) 0x00AA;
- udelay(1000);
- *(FLASH_WORD_SIZE *) ((int)addr + ADDR1) = (FLASH_WORD_SIZE) 0x0055;
- udelay(1000);
- *(FLASH_WORD_SIZE *) ((int)addr + ADDR0) = (FLASH_WORD_SIZE) 0x0090;
- udelay(1000);
-
- value = addr2[0];
-
- DEBUGF("FLASH MANUFACT: %x\n", value);
-
- switch (value) {
- case (FLASH_WORD_SIZE) AMD_MANUFACT:
- info->flash_id = FLASH_MAN_AMD;
- break;
- case (FLASH_WORD_SIZE) FUJ_MANUFACT:
- info->flash_id = FLASH_MAN_FUJ;
- break;
- case (FLASH_WORD_SIZE) SST_MANUFACT:
- info->flash_id = FLASH_MAN_SST;
- break;
- case (FLASH_WORD_SIZE) STM_MANUFACT:
- info->flash_id = FLASH_MAN_STM;
- break;
- default:
- info->flash_id = FLASH_UNKNOWN;
- info->sector_count = 0;
- info->size = 0;
- return (0); /* no or unknown flash */
- }
-
-#ifdef CONFIG_ADCIOP
- value = addr2[0]; /* device ID */
- debug("\ndev_code=%x\n", value);
-#else
- value = addr2[1]; /* device ID */
-#endif
-
- DEBUGF("\nFLASH DEVICEID: %x\n", value);
-
- info->flash_id = 0;
- info->sector_count = CFG_MAX_FLASH_SECT;
- info->size = 0x02000000;
-
- /* set up sector start address table */
- for (i = 0; i < info->sector_count; i++) {
- info->start[i] = (int)base + (i * 0x00020000);
- info->protect[i] = 0;
- }
-
- *(FLASH_WORD_SIZE *) ((int)addr) = (FLASH_WORD_SIZE) 0x00F0; /* reset bank */
-
- return (info->size);
-}
-
-int wait_for_DQ7(flash_info_t * info, int sect)
-{
- ulong start, now, last;
- volatile FLASH_WORD_SIZE *addr =
- (FLASH_WORD_SIZE *) (info->start[sect]);
-
- start = get_timer(0);
- last = start;
- while ((addr[0] & (FLASH_WORD_SIZE) 0x00800080) !=
- (FLASH_WORD_SIZE) 0x00800080) {
- if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
- printf("Timeout\n");
- return -1;
- }
- /* show that we're waiting */
- if ((now - last) > 1000) { /* every second */
- putc('.');
- last = now;
- }
- }
- return 0;
-}
-
-/*-----------------------------------------------------------------------
- */
-
-int flash_erase(flash_info_t * info, int s_first, int s_last)
-{
- volatile FLASH_WORD_SIZE *addr = (FLASH_WORD_SIZE *) (info->start[0]);
- volatile FLASH_WORD_SIZE *addr2;
- int flag, prot, sect, l_sect;
-
- if ((s_first < 0) || (s_first > s_last)) {
- if (info->flash_id == FLASH_UNKNOWN) {
- printf("- missing\n");
- } else {
- printf("- no sectors to erase\n");
- }
- return 1;
- }
-
- if (info->flash_id == FLASH_UNKNOWN) {
- printf("Can't erase unknown flash type - aborted\n");
- return 1;
- }
-
- prot = 0;
- for (sect = s_first; sect <= s_last; ++sect) {
- if (info->protect[sect]) {
- prot++;
- }
- }
-
- if (prot) {
- printf("- Warning: %d protected sectors will not be erased!\n",
- prot);
- } else {
- printf("\n");
- }
-
- l_sect = -1;
-
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts();
-
- /* Start erase on unprotected sectors */
- for (sect = s_first; sect <= s_last; sect++) {
- if (info->protect[sect] == 0) { /* not protected */
- addr2 = (FLASH_WORD_SIZE *) (info->start[sect]);
- printf("Erasing sector %p\n", addr2);
- *(FLASH_WORD_SIZE *) ((int)addr + ADDR0) =
- (FLASH_WORD_SIZE) 0x00AA;
- asm("sync");
- asm("isync");
- *(FLASH_WORD_SIZE *) ((int)addr + ADDR1) =
- (FLASH_WORD_SIZE) 0x0055;
- asm("sync");
- asm("isync");
- *(FLASH_WORD_SIZE *) ((int)addr + ADDR0) =
- (FLASH_WORD_SIZE) 0x0080;
- asm("sync");
- asm("isync");
- *(FLASH_WORD_SIZE *) ((int)addr + ADDR0) =
- (FLASH_WORD_SIZE) 0x00AA;
- asm("sync");
- asm("isync");
- *(FLASH_WORD_SIZE *) ((int)addr + ADDR1) =
- (FLASH_WORD_SIZE) 0x0055;
- asm("sync");
- asm("isync");
- addr2[0] = (FLASH_WORD_SIZE) 0x00300030; /* sector erase */
- asm("sync");
- asm("isync");
-
- l_sect = sect;
- /*
- * Wait for each sector to complete, it's more
- * reliable. According to AMD Spec, you must
- * issue all erase commands within a specified
- * timeout. This has been seen to fail, especially
- * if printf()s are included (for debug)!!
- */
- wait_for_DQ7(info, sect);
- }
- }
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts();
-
- /* wait at least 80us - let's wait 1 ms */
- udelay(1000);
-
-#if 0
- /*
- * We wait for the last triggered sector
- */
- if (l_sect < 0)
- goto DONE;
- wait_for_DQ7(info, l_sect);
-
- DONE:
-#endif
- /* reset to read mode */
- addr = (FLASH_WORD_SIZE *) info->start[0];
- addr[0] = (FLASH_WORD_SIZE) 0x00F000F0; /* reset bank */
-
- printf(" done\n");
- return 0;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-int write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-{
- ulong cp, wp, data;
- int i, l, rc;
- ulong status_value = 0;
-
- wp = (addr & ~3); /* get lower word aligned address */
-
- /*
- * handle unaligned start bytes
- */
- if ((l = addr - wp) != 0) {
- data = 0;
- for (i = 0, cp = wp; i < l; ++i, ++cp) {
- data = (data << 8) | (*(uchar *) cp);
- }
- for (; i < 4 && cnt > 0; ++i) {
- data = (data << 8) | *src++;
- --cnt;
- ++cp;
- }
- for (; cnt == 0 && i < 4; ++i, ++cp) {
- data = (data << 8) | (*(uchar *) cp);
- }
-
- if ((rc = write_word(info, wp, data)) != 0) {
- return (rc);
- }
- wp += 4;
- }
-
- /*
- * handle word aligned part
- */
- while (cnt >= 4) {
-
- /*print status if needed */
- if ((wp >= (status_value + 0x20000))
- && (status_value < 0xFFFE0000)) {
- status_value = wp;
- printf("writing to sector 0x%X\n", status_value);
- }
-
- data = 0;
- for (i = 0; i < 4; ++i) {
- data = (data << 8) | *src++;
- }
- if ((rc = write_word(info, wp, data)) != 0) {
- return (rc);
- }
- wp += 4;
- cnt -= 4;
- }
-
- if (cnt == 0) {
- return (0);
- }
-
- /*
- * handle unaligned tail bytes
- */
- data = 0;
- for (i = 0, cp = wp; i < 4 && cnt > 0; ++i, ++cp) {
- data = (data << 8) | *src++;
- --cnt;
- }
- for (; i < 4; ++i, ++cp) {
- data = (data << 8) | (*(uchar *) cp);
- }
-
- return (write_word(info, wp, data));
-}
-
-/*-----------------------------------------------------------------------
- * Write a word to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_word(flash_info_t * info, ulong dest, ulong data)
-{
- vu_long *addr2 = (vu_long *) (info->start[0]);
- volatile FLASH_WORD_SIZE *dest2 = (FLASH_WORD_SIZE *) dest;
- volatile FLASH_WORD_SIZE *data2 = (FLASH_WORD_SIZE *) & data;
- ulong start;
- int i;
-
- /* Check if Flash is (sufficiently) erased */
- if ((*((volatile FLASH_WORD_SIZE *)dest) &
- (FLASH_WORD_SIZE) data) != (FLASH_WORD_SIZE) data) {
- return (2);
- }
-
- for (i = 0; i < 4 / sizeof(FLASH_WORD_SIZE); i++) {
- int flag;
-
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts();
-
- *(FLASH_WORD_SIZE *) ((int)addr2 + ADDR0) =
- (FLASH_WORD_SIZE) 0x00AA;
- asm("sync");
- asm("isync");
- *(FLASH_WORD_SIZE *) ((int)addr2 + ADDR1) =
- (FLASH_WORD_SIZE) 0x0055;
- asm("sync");
- asm("isync");
- *(FLASH_WORD_SIZE *) ((int)addr2 + ADDR0) =
- (FLASH_WORD_SIZE) 0x00A0;
- asm("sync");
- asm("isync");
-
- dest2[i] = data2[i];
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts();
-
- /* data polling for D7 */
- start = get_timer(0);
- while ((dest2[i] & (FLASH_WORD_SIZE) 0x00800080) !=
- (data2[i] & (FLASH_WORD_SIZE) 0x00800080)) {
-
- if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
- return (1);
- }
- }
- }
-
- return (0);
-}
-
-/*-----------------------------------------------------------------------
- */
diff --git a/board/amcc/yosemite/init.S b/board/amcc/yosemite/init.S
index 7ba43c7b0610d8dba9234dc46664f5f4273acf88..425ad0868f8950438b63e71de6db0f64f1649432 100644
--- a/board/amcc/yosemite/init.S
+++ b/board/amcc/yosemite/init.S
@@ -86,14 +86,19 @@
tlbtab:
tlbtab_start
- /*
- 0xf0000000 must be first, before relocation SA_I must be off to use the
- dcache as stack. It is patched after relocation to enable SA_I
- */
- tlbentry( 0xf0000000, SZ_256M, 0xf0000000, 0, AC_R|AC_W|AC_X|SA_G/*|SA_I*/)
- tlbentry( CFG_SDRAM_BASE, SZ_256M, 0x00000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
- tlbentry( CFG_PCI_BASE, SZ_256M, 0xE0000000, 0, AC_R|AC_W|SA_G|SA_I )
- tlbentry( CFG_NVRAM_BASE_ADDR, SZ_16K, 0x80000000, 0, AC_R|AC_W|AC_X|SA_W|SA_I )
+
+ /*
+ * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to use the
+ * speed up boot process. It is patched after relocation to enable SA_I
+ */
+ tlbentry( CFG_BOOT_BASE_ADDR, SZ_256M, CFG_BOOT_BASE_ADDR, 0, AC_R|AC_W|AC_X|SA_G/*|SA_I*/)
+
+ /* TLB-entry for init-ram in dcache (SA_I must be turned off!) */
+ tlbentry( CFG_INIT_RAM_ADDR, SZ_64K, CFG_INIT_RAM_ADDR, 0, AC_R|AC_W|AC_X|SA_G )
+
+ tlbentry( CFG_SDRAM_BASE, SZ_256M, CFG_SDRAM_BASE, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
+ tlbentry( CFG_PCI_BASE, SZ_256M, CFG_PCI_BASE, 0, AC_R|AC_W|SA_G|SA_I )
+ tlbentry( CFG_NVRAM_BASE_ADDR, SZ_256M, CFG_NVRAM_BASE_ADDR, 0, AC_R|AC_W|AC_X|SA_W|SA_I )
/* PCI */
tlbentry( CFG_PCI_MEMBASE, SZ_256M, CFG_PCI_MEMBASE, 0, AC_R|AC_W|SA_G|SA_I )
diff --git a/board/amcc/yosemite/yosemite.c b/board/amcc/yosemite/yosemite.c
index 6c8a883e183ab93c03059472a182718509e972ba..b50e99ab8da481eb80082123acb79d15f1053edf 100644
--- a/board/amcc/yosemite/yosemite.c
+++ b/board/amcc/yosemite/yosemite.c
@@ -20,9 +20,12 @@
*/
#include <common.h>
+#include <ppc4xx.h>
#include <asm/processor.h>
#include <spd_sdram.h>
+extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+
int board_early_init_f(void)
{
register uint reg;
@@ -35,7 +38,7 @@ int board_early_init_f(void)
mtdcr(ebccfgd, reg | 0x04000000); /* Set ATC */
mtebc(pb0ap, 0x03017300); /* FLASH/SRAM */
- mtebc(pb0cr, 0xfe0ba000); /* BAS=0xfe0 32MB r/w 16-bit */
+ mtebc(pb0cr, 0xfc0da000); /* BAS=0xfc0 64MB r/w 16-bit */
mtebc(pb1ap, 0x00000000);
mtebc(pb1cr, 0x00000000);
@@ -122,6 +125,54 @@ int board_early_init_f(void)
return 0;
}
+int misc_init_r (void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+ uint pbcr;
+ int size_val = 0;
+
+ /* Re-do sizing to get full correct info */
+ mtdcr(ebccfga, pb0cr);
+ pbcr = mfdcr(ebccfgd);
+ switch (gd->bd->bi_flashsize) {
+ case 1 << 20:
+ size_val = 0;
+ break;
+ case 2 << 20:
+ size_val = 1;
+ break;
+ case 4 << 20:
+ size_val = 2;
+ break;
+ case 8 << 20:
+ size_val = 3;
+ break;
+ case 16 << 20:
+ size_val = 4;
+ break;
+ case 32 << 20:
+ size_val = 5;
+ break;
+ case 64 << 20:
+ size_val = 6;
+ break;
+ case 128 << 20:
+ size_val = 7;
+ break;
+ }
+ pbcr = (pbcr & 0x0001ffff) | gd->bd->bi_flashstart | (size_val << 17);
+ mtdcr(ebccfga, pb0cr);
+ mtdcr(ebccfgd, pbcr);
+
+ /* Monitor protection ON by default */
+ (void)flash_protect(FLAG_PROTECT_SET,
+ -CFG_MONITOR_LEN,
+ 0xffffffff,
+ &flash_info[0]);
+
+ return 0;
+}
+
int checkboard(void)
{
sys_info_t sysinfo;
@@ -135,6 +186,8 @@ int checkboard(void)
printf("\tOPB: %lu MHz\n", sysinfo.freqOPB / 1000000);
printf("\tPER: %lu MHz\n", sysinfo.freqEPB / 1000000);
printf("\tPCI: %lu MHz\n", sysinfo.freqPCI / 1000000);
+
+
return (0);
}
diff --git a/board/tqm5200/tqm5200.c b/board/tqm5200/tqm5200.c
index 43d89b0604db477b7cf224b9efc009df56389f6a..90275ecd8e5639eed77e235be640fec099740854 100644
--- a/board/tqm5200/tqm5200.c
+++ b/board/tqm5200/tqm5200.c
@@ -250,6 +250,10 @@ long int initdram (int board_type)
int checkboard (void)
{
+#if defined (CONFIG_AEVFIFO)
+ puts ("Board: AEVFIFO\n");
+ return 0;
+#endif
#if defined (CONFIG_TQM5200_AA)
puts ("Board: TQM5200-AA (TQ-Components GmbH)\n");
#elif defined (CONFIG_TQM5200_AB)
diff --git a/common/cmd_ace.c b/common/cmd_ace.c
index 54fb9189ff290348994bd91bc4b6c65f6c87251c..fb4d3584b5039690e3e4475327df1cc3996eb0b7 100644
--- a/common/cmd_ace.c
+++ b/common/cmd_ace.c
@@ -31,7 +31,7 @@
* available to cmd_fat.c:get_dev and filling in a block device
* description that has all the bits needed for FAT support to
* read sectors.
- *
+ *
* According to Xilinx technical support, before accessing the
* SystemACE CF you need to set the following control bits:
* FORCECFGMODE : 1
diff --git a/common/cmd_bdinfo.c b/common/cmd_bdinfo.c
index 4914ac5a16ef8f9d25879bb3e457fa351cf18daf..40e28dd9d23b4e14774b536bdd854e671f431ffd 100644
--- a/common/cmd_bdinfo.c
+++ b/common/cmd_bdinfo.c
@@ -62,14 +62,14 @@ int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
print_num ("bootflags", bd->bi_bootflags );
#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || \
defined(CONFIG_405EP) || defined(CONFIG_XILINX_ML300) || \
- defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
+ defined(CONFIG_440EP) || defined(CONFIG_440GR)
print_str ("procfreq", strmhz(buf, bd->bi_procfreq));
print_str ("plb_busfreq", strmhz(buf, bd->bi_plb_busfreq));
#if defined(CONFIG_405GP) || defined(CONFIG_405EP) || defined(CONFIG_XILINX_ML300) || \
- defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
+ defined(CONFIG_440EP) || defined(CONFIG_440GR)
print_str ("pci_busfreq", strmhz(buf, bd->bi_pci_busfreq));
#endif
-#else /* ! CONFIG_405GP, CONFIG_405CR, CONFIG_405EP, CONFIG_XILINX_ML300, CONFIG_440_EP CONFIG_440_GR */
+#else /* ! CONFIG_405GP, CONFIG_405CR, CONFIG_405EP, CONFIG_XILINX_ML300, CONFIG_440EP CONFIG_440GR */
#if defined(CONFIG_CPM2)
print_str ("vco", strmhz(buf, bd->bi_vco));
print_str ("sccfreq", strmhz(buf, bd->bi_sccfreq));
@@ -80,7 +80,7 @@ int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
print_str ("cpmfreq", strmhz(buf, bd->bi_cpmfreq));
#endif
print_str ("busfreq", strmhz(buf, bd->bi_busfreq));
-#endif /* CONFIG_405GP, CONFIG_405CR, CONFIG_405EP, CONFIG_XILINX_ML300, CONFIG_440_EP CONFIG_440_GR */
+#endif /* CONFIG_405GP, CONFIG_405CR, CONFIG_405EP, CONFIG_XILINX_ML300, CONFIG_440EP CONFIG_440GR */
#if defined(CONFIG_MPC8220)
print_str ("inpfreq", strmhz(buf, bd->bi_inpfreq));
print_str ("flbfreq", strmhz(buf, bd->bi_flbfreq));
diff --git a/common/cmd_flash.c b/common/cmd_flash.c
index 0fb4dbb7ca1c7cfbcbb0e1cfc796c9a182e362ca..d5be30c54dd0d00791e56a1fba2a36ba13966c25 100644
--- a/common/cmd_flash.c
+++ b/common/cmd_flash.c
@@ -534,7 +534,7 @@ int do_protect (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
return rcode;
}
-
+
#if (CONFIG_COMMANDS & CFG_CMD_JFFS2) && defined(CONFIG_JFFS2_CMDLINE)
/* protect on/off <part-id> */
if ((argc == 3) && (id_parse(argv[2], NULL, &dev_type, &dev_num) == 0)) {
@@ -664,6 +664,15 @@ int flash_sect_protect (int p, ulong addr_first, ulong addr_last)
/**************************************************/
+#if (CONFIG_COMMANDS & CFG_CMD_JFFS2) && defined(CONFIG_JFFS2_CMDLINE)
+# define TMP_ERASE "erase <part-id>\n - erase partition\n"
+# define TMP_PROT_ON "protect on <part-id>\n - protect partition\n"
+# define TMP_PROT_OFF "protect off <part-id>\n - make partition writable\n"
+#else
+# define TMP_ERASE /* empty */
+# define TMP_PROT_ON /* empty */
+# define TMP_PROT_OFF /* empty */
+#endif
U_BOOT_CMD(
flinfo, 2, 1, do_flinfo,
@@ -682,9 +691,7 @@ U_BOOT_CMD(
"w/addr 'start'+'len'-1\n"
"erase N:SF[-SL]\n - erase sectors SF-SL in FLASH bank # N\n"
"erase bank N\n - erase FLASH bank # N\n"
-#if (CONFIG_COMMANDS & CFG_CMD_JFFS2) && defined(CONFIG_JFFS2_CMDLINE)
- "erase <part-id>\n - erase partition\n"
-#endif
+ TMP_ERASE
"erase all\n - erase all FLASH banks\n"
);
@@ -699,9 +706,7 @@ U_BOOT_CMD(
"protect on N:SF[-SL]\n"
" - protect sectors SF-SL in FLASH bank # N\n"
"protect on bank N\n - protect FLASH bank # N\n"
-#if (CONFIG_COMMANDS & CFG_CMD_JFFS2) && defined(CONFIG_JFFS2_CMDLINE)
- "protect on <part-id>\n - protect partition\n"
-#endif
+ TMP_PROT_ON
"protect on all\n - protect all FLASH banks\n"
"protect off start end\n"
" - make FLASH from addr 'start' to addr 'end' writable\n"
@@ -711,10 +716,12 @@ U_BOOT_CMD(
"protect off N:SF[-SL]\n"
" - make sectors SF-SL writable in FLASH bank # N\n"
"protect off bank N\n - make FLASH bank # N writable\n"
-#if (CONFIG_COMMANDS & CFG_CMD_JFFS2) && defined(CONFIG_JFFS2_CMDLINE)
- "protect off <part-id>\n - make partition writable\n"
-#endif
+ TMP_PROT_OFF
"protect off all\n - make all FLASH banks writable\n"
);
+#undef TMP_ERASE
+#undef TMP_PROT_ON
+#undef TMP_PROT_OFF
+
#endif /* CFG_CMD_FLASH */
diff --git a/common/cmd_fpga.c b/common/cmd_fpga.c
index 0c0643ccc3513705f2518528eb80cf469df68a31..c4b73929493b1cc487895011709434caabee9cbf 100644
--- a/common/cmd_fpga.c
+++ b/common/cmd_fpga.c
@@ -137,9 +137,9 @@ int fpga_loadbitstream(unsigned long dev, char* fpgadata, size_t size)
__FUNCTION__);
return FPGA_FAIL;
}
- swapsize = ((unsigned int) *dataptr <<24) +
- ((unsigned int) *(dataptr+1) <<16) +
- ((unsigned int) *(dataptr+2) <<8 ) +
+ swapsize = ((unsigned int) *dataptr <<24) +
+ ((unsigned int) *(dataptr+1) <<16) +
+ ((unsigned int) *(dataptr+2) <<8 ) +
((unsigned int) *(dataptr+3) ) ;
dataptr+=4;
printf(" bytes in bitstream = %d\n", swapsize);
@@ -217,7 +217,7 @@ int do_fpga (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
PRINTF ("%s: device = %d\n", __FUNCTION__, dev);
/* FIXME - this is a really weak test */
if ((argc == 3) && (dev > fpga_count ())) { /* must be buffer ptr */
- PRINTF ("%s: Assuming buffer pointer in arg 3\n",
+ PRINTF ("%s: Assuming buffer pointer in arg 3\n",
__FUNCTION__);
fpga_data = (void *) dev;
PRINTF ("%s: fpga_data = 0x%x\n",
diff --git a/common/cmd_jffs2.c b/common/cmd_jffs2.c
index 21eacc2f16717823747914141a0dd1a01e7f6f32..16f5b7aea9784733ab9851bf51a93f6c8fae45bc 100644
--- a/common/cmd_jffs2.c
+++ b/common/cmd_jffs2.c
@@ -45,7 +45,7 @@
* partition := <part-id>
* <part-id> := <dev-id>,part_num
*
- *
+ *
* 'mtdids' - linux kernel mtd device id <-> u-boot device id mapping
*
* mtdids=<idmap>[,<idmap>,...]
@@ -403,7 +403,7 @@ static int part_del(struct mtd_device *dev, struct part_info *part)
return device_del(dev);
/* otherwise just delete this partition */
-
+
if (dev == current_dev) {
/* we are modyfing partitions for the current device,
* update current */
@@ -416,7 +416,7 @@ static int part_del(struct mtd_device *dev, struct part_info *part)
current_partnum = 0;
current_save();
} else if (part->offset <= curr_pi->offset) {
- current_partnum--;
+ current_partnum--;
current_save();
}
}
@@ -471,7 +471,7 @@ static int part_sort_add(struct mtd_device *dev, struct part_info *part)
list_add(&part->link, &dev->parts);
return 0;
}
-
+
new_pi = list_entry(&part->link, struct part_info, link);
/* get current partition info if we are updating current device */
@@ -492,7 +492,7 @@ static int part_sort_add(struct mtd_device *dev, struct part_info *part)
if (new_pi->offset <= pi->offset) {
list_add_tail(&part->link, entry);
-
+
if (curr_pi && (pi->offset <= curr_pi->offset)) {
/* we are modyfing partitions for the current
* device, update current */
@@ -516,7 +516,7 @@ static int part_sort_add(struct mtd_device *dev, struct part_info *part)
*/
static int part_add(struct mtd_device *dev, struct part_info *part)
{
- /* verify alignment and size */
+ /* verify alignment and size */
if (part_validate(dev->id, part) != 0)
return 1;
@@ -565,14 +565,14 @@ static int part_parse(const char *const partdef, const char **ret, struct part_i
}
}
- /* check for offset */
+ /* check for offset */
offset = OFFSET_NOT_SPECIFIED;
if (*p == '@') {
p++;
offset = memsize_parse(p, &p);
}
- /* now look for the name */
+ /* now look for the name */
if (*p == '(') {
name = ++p;
if ((p = strchr(name, ')')) == NULL) {
@@ -591,7 +591,7 @@ static int part_parse(const char *const partdef, const char **ret, struct part_i
name = NULL;
}
- /* test for options */
+ /* test for options */
mask_flags = 0;
if (strncmp(p, "ro", 2) == 0) {
mask_flags |= MTD_WRITEABLE;
@@ -823,8 +823,8 @@ static int device_parse(const char *const mtd_dev, const char **ret, struct mtd_
printf("invalid mtd device '%.*s'\n", mtd_id_len - 1, mtd_id);
return 1;
}
-
- DEBUGF("dev type = %d (%s), dev num = %d, mtd-id = %s\n",
+
+ DEBUGF("dev type = %d (%s), dev num = %d, mtd-id = %s\n",
id->type, MTD_DEV_TYPE(id->type),
id->num, id->mtd_id);
pend = strchr(p, ';');
@@ -836,7 +836,7 @@ static int device_parse(const char *const mtd_dev, const char **ret, struct mtd_
offset = 0;
if ((dev = device_find(id->type, id->num)) != NULL) {
- /* if device already exists start at the end of the last partition */
+ /* if device already exists start at the end of the last partition */
part = list_entry(dev->parts.prev, struct part_info, link);
offset = part->offset + part->size;
}
@@ -852,7 +852,7 @@ static int device_parse(const char *const mtd_dev, const char **ret, struct mtd_
else
offset = part->offset;
- /* verify alignment and size */
+ /* verify alignment and size */
if (part_validate(id, part) != 0)
break;
@@ -885,7 +885,7 @@ static int device_parse(const char *const mtd_dev, const char **ret, struct mtd_
} else {
printf("unexpected character '%c' at the end of device\n", *p);
*ret = NULL;
- return 1;
+ return 1;
}
}
@@ -939,7 +939,7 @@ static struct mtdids* id_find(u8 type, u8 num)
{
struct list_head *entry;
struct mtdids *id;
-
+
list_for_each(entry, &mtdids) {
id = list_entry(entry, struct mtdids, link);
@@ -951,7 +951,7 @@ static struct mtdids* id_find(u8 type, u8 num)
}
/**
- * Search global mtdids list and find id of a requested mtd_id.
+ * Search global mtdids list and find id of a requested mtd_id.
*
* Note: first argument is not null terminated.
*
@@ -963,7 +963,7 @@ static struct mtdids* id_find_by_mtd_id(const char *mtd_id, unsigned int mtd_id_
{
struct list_head *entry;
struct mtdids *id;
-
+
DEBUGF("--- id_find_by_mtd_id: '%.*s' (len = %d)\n",
mtd_id_len, mtd_id, mtd_id_len);
@@ -1045,13 +1045,13 @@ static int generate_mtdparts(char *buf, u32 buflen)
buf[0] = '\0';
return 0;
}
-
+
sprintf(p, "mtdparts=");
p += 9;
list_for_each(dentry, &devices) {
dev = list_entry(dentry, struct mtd_device, link);
-
+
/* copy mtd_id */
len = strlen(dev->id->mtd_id) + 1;
if (len > maxlen)
@@ -1078,8 +1078,8 @@ static int generate_mtdparts(char *buf, u32 buflen)
memcpy(p, tmpbuf, len);
p += len;
maxlen -= len;
-
-
+
+
/* add offset only when there is a gap between
* partitions */
if ((!prev_part && (offset != 0)) ||
@@ -1107,7 +1107,7 @@ static int generate_mtdparts(char *buf, u32 buflen)
*(p++) = ')';
maxlen -= len;
}
-
+
/* ro mask flag */
if (part->mask_flags && MTD_WRITEABLE) {
len = 2;
@@ -1188,7 +1188,7 @@ static void list_partitions(void)
MTD_DEV_TYPE(dev->id->type), dev->id->num,
dev->id->mtd_id, dev->num_parts);
printf(" #: name\t\t\tsize\t\toffset\t\tmask_flags\n");
-
+
/* list partitions for given device */
part_num = 0;
list_for_each(pentry, &dev->parts) {
@@ -1256,7 +1256,7 @@ int find_dev_and_part(const char *id, struct mtd_device **dev,
printf("unexpected trailing character '%c'\n", *p);
return 1;
}
-
+
if ((*dev = device_find(type, dnum)) == NULL) {
printf("no such device %s%d\n", MTD_DEV_TYPE(type), dnum);
return 1;
@@ -1328,7 +1328,7 @@ static int parse_mtdparts(const char *const mtdparts)
/* re-read 'mtdparts' variable, devices_init may be updating env */
p = getenv("mtdparts");
-
+
if (strncmp(p, "mtdparts=", 9) != 0) {
printf("mtdparts variable doesn't start with 'mtdparts='\n");
return err;
@@ -1615,7 +1615,7 @@ int mtdparts_init(void)
/**
* Parse and initialize global mtdids mapping and create global
- * device/partition list.
+ * device/partition list.
*
* @return 0 on success, 1 otherwise
*/
@@ -1627,6 +1627,9 @@ int mtdparts_init(void)
DEBUGF("\n---mtdparts_init---\n");
if (!initialized) {
+ struct mtdids *id;
+ struct part_info *part;
+
initialized = 1;
current_dev = (struct mtd_device *)
malloc(sizeof(struct mtd_device) +
@@ -1639,8 +1642,8 @@ int mtdparts_init(void)
memset(current_dev, 0, sizeof(struct mtd_device) +
sizeof(struct part_info) + sizeof(struct mtdids));
- struct mtdids *id = (struct mtdids *)(current_dev + 1);
- struct part_info *part = (struct part_info *)(id + 1);
+ id = (struct mtdids *)(current_dev + 1);
+ part = (struct part_info *)(id + 1);
/* id */
id->mtd_id = "single part";
@@ -1867,7 +1870,7 @@ int do_jffs2_fsinfo(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
/* make sure we are in sync with env variables */
if (mtdparts_init() !=0)
return 1;
-
+
if ((part = jffs2_part_info(current_dev, current_partnum))){
/* check partition type for cramfs */
@@ -1965,7 +1968,7 @@ int do_jffs2_mtdparts(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
list_partitions();
return 0;
}
-
+
/* mtdparts add <mtd-dev> <size>[@<offset>] <name> [ro] */
if (((argc == 5) || (argc == 6)) && (strcmp(argv[1], "add") == 0)) {
#define PART_ADD_DESC_MAXLEN 64
@@ -1995,7 +1998,7 @@ int do_jffs2_mtdparts(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
return 1;
}
sprintf(tmpbuf, "%s:%s(%s)%s",
- id->mtd_id, argv[3], argv[4], argv[5] ? argv[5] : "");
+ id->mtd_id, argv[3], argv[4], argv[5] ? argv[5] : "");
DEBUGF("add tmpbuf: %s\n", tmpbuf);
if ((device_parse(tmpbuf, NULL, &dev) != 0) || (!dev))
diff --git a/common/lynxkdi.c b/common/lynxkdi.c
index 19f0620c9385a2799231bd47c867f0f41f8e309b..797d8cc880d35594213ed55a8147eaee410e0c4d 100644
--- a/common/lynxkdi.c
+++ b/common/lynxkdi.c
@@ -20,7 +20,7 @@
#if defined(CONFIG_LYNXKDI)
#include <lynxkdi.h>
-#if defined(CONFIG_MPC8260) || defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
+#if defined(CONFIG_MPC8260) || defined(CONFIG_440EP) || defined(CONFIG_440GR)
void lynxkdi_boot ( image_header_t *hdr )
{
void (*lynxkdi)(void) = (void(*)(void))hdr->ih_ep;
diff --git a/cpu/ppc4xx/405gp_enet.c b/cpu/ppc4xx/405gp_enet.c
index b60d1221d000e87382ea92046006536c9d246984..968f0ced446bdb3bbaaf3ff2d3788bd3e84180bc 100644
--- a/cpu/ppc4xx/405gp_enet.c
+++ b/cpu/ppc4xx/405gp_enet.c
@@ -227,7 +227,7 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
while (mfdcr (malmcr) & MAL_CR_MMSR) {
};
-#if defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
+#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
out32 (ZMII_FER, 0);
udelay(100);
/* set RII mode */
@@ -464,7 +464,7 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
out32(ZMII_SSR, in32(ZMII_SSR) | 0x10000000);
else
out32(ZMII_SSR, in32(ZMII_SSR) & ~0x10000000);
-#if defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
+#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
mfsdr(sdr_mfr, reg);
/* set speed */
if (speed == _100BASET) {
diff --git a/cpu/ppc4xx/405gp_pci.c b/cpu/ppc4xx/405gp_pci.c
index ebbcfd573ac9bfc7518c4d22b9f5747f807844b1..89be137a868e6ae6ff0e223de0e3033b9c0c5285 100644
--- a/cpu/ppc4xx/405gp_pci.c
+++ b/cpu/ppc4xx/405gp_pci.c
@@ -437,7 +437,7 @@ void pci_440_init (struct pci_controller *hose)
* The PCI initialization sequence enable bit must be set ... if not abort
* pci setup since updating the bit requires chip reset.
*--------------------------------------------------------------------------*/
-#if defined (CONFIG_440_GX) || defined (CONFIG_440_EP) || defined(CONFIG_440_GR)
+#if defined (CONFIG_440GX) || defined (CONFIG_440EP) || defined(CONFIG_440GR)
mfsdr(sdr_sdstp1,strap);
if ( (strap & 0x00010000) == 0 ){
printf("PCI: SDR0_STRP1[PISE] not set.\n");
@@ -495,7 +495,7 @@ void pci_440_init (struct pci_controller *hose)
out16r( PCIX0_CLS, 0x00060000 ); /* Bridge, host bridge */
#endif
-#if defined(CONFIG_440_GX)
+#if defined(CONFIG_440GX)
out32r( PCIX0_BRDGOPT1, 0x04000060 ); /* PLB Rq pri highest */
out32r( PCIX0_BRDGOPT2, in32(PCIX0_BRDGOPT2) | 0x83 ); /* Enable host config, clear Timeout, ensure int src1 */
#elif defined(PCIX0_BRDGOPT1)
@@ -531,7 +531,7 @@ void pci_440_init (struct pci_controller *hose)
#ifdef CONFIG_PCI_SCAN_SHOW
printf("PCI: Bus Dev VenId DevId Class Int\n");
#endif
-#if !defined(CONFIG_440_EP) && !defined(CONFIG_440_GR)
+#if !defined(CONFIG_440EP) && !defined(CONFIG_440GR)
out16r( PCIX0_CMD, in16r( PCIX0_CMD ) | PCI_COMMAND_MASTER);
#endif
hose->last_busno = pci_hose_scan(hose);
diff --git a/cpu/ppc4xx/440gx_enet.c b/cpu/ppc4xx/440gx_enet.c
index f4004fb7802b9948c8a85db62f70b443fb3135c8..68cbf34391c4ea0e5af62e02de0c13ee868b1f8a 100644
--- a/cpu/ppc4xx/440gx_enet.c
+++ b/cpu/ppc4xx/440gx_enet.c
@@ -175,7 +175,7 @@ static void ppc_440x_eth_halt (struct eth_device *dev)
extern int phy_setup_aneg (unsigned char addr);
extern int miiphy_reset (unsigned char addr);
-#if defined (CONFIG_440_GX)
+#if defined (CONFIG_440GX)
int ppc_440x_eth_setup_bridge(int devnum, bd_t * bis)
{
unsigned long pfc1;
@@ -279,7 +279,7 @@ static int ppc_440x_eth_init (struct eth_device *dev, bd_t * bis)
unsigned short devnum;
unsigned short reg_short;
sys_info_t sysinfo;
-#if defined(CONFIG_440_GX)
+#if defined(CONFIG_440GX)
int ethgroup;
#endif
@@ -323,7 +323,7 @@ static int ppc_440x_eth_init (struct eth_device *dev, bd_t * bis)
/* MAL Channel RESET */
/* 1st reset MAL channel */
/* Note: writing a 0 to a channel has no effect */
-#if defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
+#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
mtdcr (maltxcarr, (MAL_TXRX_CASR >> (hw_p->devnum*2)));
#else
mtdcr (maltxcarr, (MAL_TXRX_CASR >> hw_p->devnum));
@@ -362,9 +362,9 @@ static int ppc_440x_eth_init (struct eth_device *dev, bd_t * bis)
out32 (ZMII_FER, 0);
udelay (100);
-#if defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
+#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
out32 (ZMII_FER, (ZMII_FER_RMII | ZMII_FER_MDI) << ZMII_FER_V (devnum));
-#elif defined(CONFIG_440_GX)
+#elif defined(CONFIG_440GX)
ethgroup = ppc_440x_eth_setup_bridge(devnum, bis);
#else
if ((devnum == 0) || (devnum == 1)) {
@@ -375,8 +375,8 @@ static int ppc_440x_eth_init (struct eth_device *dev, bd_t * bis)
out32 (RGMII_FER, ((RGMII_FER_RGMII << RGMII_FER_V (2)) |
(RGMII_FER_RGMII << RGMII_FER_V (3))));
}
-
#endif
+
out32 (ZMII_SSR, ZMII_SSR_SP << ZMII_SSR_V(devnum));
__asm__ volatile ("eieio");
@@ -391,7 +391,7 @@ static int ppc_440x_eth_init (struct eth_device *dev, bd_t * bis)
failsafe--;
}
-#if defined(CONFIG_440_GX)
+#if defined(CONFIG_440GX)
/* Whack the M1 register */
mode_reg = 0x0;
mode_reg &= ~0x00000038;
@@ -406,7 +406,7 @@ static int ppc_440x_eth_init (struct eth_device *dev, bd_t * bis)
mode_reg |= EMAC_M1_OBCI_GT100;
out32 (EMAC_M1 + hw_p->hw_addr, mode_reg);
-#endif /* defined(CONFIG_440_GX) */
+#endif /* defined(CONFIG_440GX) */
/* wait for PHY to complete auto negotiation */
reg_short = 0;
@@ -418,7 +418,7 @@ static int ppc_440x_eth_init (struct eth_device *dev, bd_t * bis)
case 1:
reg = CONFIG_PHY1_ADDR;
break;
-#if defined (CONFIG_440_GX)
+#if defined (CONFIG_440GX)
case 2:
reg = CONFIG_PHY2_ADDR;
break;
@@ -441,7 +441,7 @@ static int ppc_440x_eth_init (struct eth_device *dev, bd_t * bis)
if (hw_p->first_init == 0) {
miiphy_reset (reg);
-#if defined(CONFIG_440_GX)
+#if defined(CONFIG_440GX)
#if defined(CONFIG_CIS8201_PHY)
/*
* Cicada 8201 PHY needs to have an extended register whacked
@@ -512,7 +512,7 @@ static int ppc_440x_eth_init (struct eth_device *dev, bd_t * bis)
(int) speed, (duplex == HALF) ? "HALF" : "FULL");
}
-#if defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
+#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
mfsdr(sdr_mfr, reg);
if (speed == 100) {
reg = (reg & ~SDR0_MFR_ZMII_MODE_MASK) | SDR0_MFR_ZMII_MODE_RMII_100M;
@@ -521,13 +521,13 @@ static int ppc_440x_eth_init (struct eth_device *dev, bd_t * bis)
}
mtsdr(sdr_mfr, reg);
#endif
+
/* Set ZMII/RGMII speed according to the phy link speed */
reg = in32 (ZMII_SSR);
if ( (speed == 100) || (speed == 1000) )
out32 (ZMII_SSR, reg | (ZMII_SSR_SP << ZMII_SSR_V (devnum)));
else
- out32 (ZMII_SSR,
- reg & (~(ZMII_SSR_SP << ZMII_SSR_V (devnum))));
+ out32 (ZMII_SSR, reg & (~(ZMII_SSR_SP << ZMII_SSR_V (devnum))));
if ((devnum == 2) || (devnum == 3)) {
if (speed == 1000)
@@ -541,7 +541,7 @@ static int ppc_440x_eth_init (struct eth_device *dev, bd_t * bis)
}
/* set the Mal configuration reg */
-#if defined(CONFIG_440_GX)
+#if defined(CONFIG_440GX)
mtdcr (malmcr, MAL_CR_PLBB | MAL_CR_OPBBL | MAL_CR_LEA |
MAL_CR_PLBLT_DEFAULT | MAL_CR_EOPIE | 0x00330000);
#else
@@ -642,7 +642,7 @@ static int ppc_440x_eth_init (struct eth_device *dev, bd_t * bis)
switch (devnum) {
case 1:
/* setup MAL tx & rx channel pointers */
-#if defined (CONFIG_440_EP) || defined (CONFIG_440_GR)
+#if defined (CONFIG_440EP) || defined (CONFIG_440GR)
mtdcr (maltxctp2r, hw_p->tx);
#else
mtdcr (maltxctp1r, hw_p->tx);
@@ -653,7 +653,7 @@ static int ppc_440x_eth_init (struct eth_device *dev, bd_t * bis)
/* set RX buffer size */
mtdcr (malrcbs1, ENET_MAX_MTU_ALIGNED / 16);
break;
-#if defined (CONFIG_440_GX)
+#if defined (CONFIG_440GX)
case 2:
/* setup MAL tx & rx channel pointers */
mtdcr (maltxbattr, 0x0);
@@ -672,7 +672,7 @@ static int ppc_440x_eth_init (struct eth_device *dev, bd_t * bis)
/* set RX buffer size */
mtdcr (malrcbs3, ENET_MAX_MTU_ALIGNED / 16);
break;
-#endif /*CONFIG_440_GX */
+#endif /* CONFIG_440GX */
case 0:
default:
/* setup MAL tx & rx channel pointers */
@@ -686,7 +686,7 @@ static int ppc_440x_eth_init (struct eth_device *dev, bd_t * bis)
}
/* Enable MAL transmit and receive channels */
-#if defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
+#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
mtdcr (maltxcasr, (MAL_TXRX_CASR >> (hw_p->devnum*2)));
#else
mtdcr (maltxcasr, (MAL_TXRX_CASR >> hw_p->devnum));
@@ -836,7 +836,7 @@ int enetInt (struct eth_device *dev)
unsigned long mal_rx_eob;
unsigned long my_uic0msr, my_uic1msr;
-#if defined(CONFIG_440_GX)
+#if defined(CONFIG_440GX)
unsigned long my_uic2msr;
#endif
EMAC_440GX_HW_PST hw_p;
@@ -856,7 +856,7 @@ int enetInt (struct eth_device *dev)
my_uic0msr = mfdcr (uic0msr);
my_uic1msr = mfdcr (uic1msr);
-#if defined(CONFIG_440_GX)
+#if defined(CONFIG_440GX)
my_uic2msr = mfdcr (uic2msr);
#endif
if (!(my_uic0msr & (UIC_MRE | UIC_MTE))
@@ -866,7 +866,7 @@ int enetInt (struct eth_device *dev)
/* not for us */
return (rc);
}
-#if defined (CONFIG_440_GX)
+#if defined (CONFIG_440GX)
if (!(my_uic0msr & (UIC_MRE | UIC_MTE))
&& !(my_uic2msr & (UIC_ETH2 | UIC_ETH3))) {
/* not for us */
@@ -922,7 +922,7 @@ int enetInt (struct eth_device *dev)
return (rc); /* we had errors so get out */
}
}
-#if defined (CONFIG_440_GX)
+#if defined (CONFIG_440GX)
if (hw_p->devnum == 2) {
if (UIC_ETH2 & my_uic2msr) { /* look for EMAC errors */
emac_isr = in32 (EMAC_ISR + hw_p->hw_addr);
@@ -958,7 +958,7 @@ int enetInt (struct eth_device *dev)
return (rc); /* we had errors so get out */
}
}
-#endif /* CONFIG_440_GX */
+#endif /* CONFIG_440GX */
/* handle MAX TX EOB interrupt from a tx */
if (my_uic0msr & UIC_MTE) {
mal_rx_eob = mfdcr (maltxeobisr);
@@ -987,14 +987,14 @@ int enetInt (struct eth_device *dev)
case 1:
mtdcr (uic1sr, UIC_ETH1);
break;
-#if defined (CONFIG_440_GX)
+#if defined (CONFIG_440GX)
case 2:
mtdcr (uic2sr, UIC_ETH2);
break;
case 3:
mtdcr (uic2sr, UIC_ETH3);
break;
-#endif /* CONFIG_440_GX */
+#endif /* CONFIG_440GX */
default:
break;
}
@@ -1184,7 +1184,7 @@ int ppc_440x_eth_initialize (bd_t * bis)
int eth_num = 0;
EMAC_440GX_HW_PST hw = NULL;
-#if defined(CONFIG_440_GX)
+#if defined(CONFIG_440GX)
unsigned long pfc1;
mfsdr (sdr_pfc1, pfc1);
@@ -1197,7 +1197,7 @@ int ppc_440x_eth_initialize (bd_t * bis)
#if defined(CONFIG_PHY1_ADDR)
bis->bi_phynum[1] = CONFIG_PHY1_ADDR;
#endif
-#if defined(CONFIG_440_GX)
+#if defined(CONFIG_440GX)
bis->bi_phynum[2] = CONFIG_PHY2_ADDR;
bis->bi_phynum[3] = CONFIG_PHY3_ADDR;
bis->bi_phymode[0] = 0;
@@ -1205,7 +1205,7 @@ int ppc_440x_eth_initialize (bd_t * bis)
bis->bi_phymode[2] = 2;
bis->bi_phymode[3] = 2;
-#if defined (CONFIG_440_GX)
+#if defined (CONFIG_440GX)
ppc_440x_eth_setup_bridge(0, bis);
#endif
#endif
diff --git a/cpu/ppc4xx/cpu.c b/cpu/ppc4xx/cpu.c
index 3a4b5d01694dc13d7e332fa5d6380e3a9758358f..a9bb89ad0a7021fdfa7013035578b787ab37d697 100644
--- a/cpu/ppc4xx/cpu.c
+++ b/cpu/ppc4xx/cpu.c
@@ -178,7 +178,7 @@ int checkcpu (void)
case PVR_440GX_RC:
puts("GX Rev. C");
break;
-#if defined(CONFIG_440_GR)
+#if defined(CONFIG_440GR)
case PVR_440EP_RA:
puts("GR Rev. A");
break;
diff --git a/cpu/ppc4xx/cpu_init.c b/cpu/ppc4xx/cpu_init.c
index 74f013520bbe9c4ffff1f1e80a4f0c9023f109fe..68e1a450ca774a959c51f9f5df65dbfbb3b92b34 100644
--- a/cpu/ppc4xx/cpu_init.c
+++ b/cpu/ppc4xx/cpu_init.c
@@ -188,7 +188,7 @@ cpu_init_f (void)
unsigned long val;
val = mfspr(tcr);
-#if defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
+#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
val |= 0xb8000000; /* generate system reset after 1.34 seconds */
#else
val |= 0xf0000000; /* generate system reset after 2.684 seconds */
diff --git a/cpu/ppc4xx/interrupts.c b/cpu/ppc4xx/interrupts.c
index c0e51f9293396436ebf0c64a7bb09469516cf51c..1d8dc7c221deb4be50465424e94f46cc29a00875 100644
--- a/cpu/ppc4xx/interrupts.c
+++ b/cpu/ppc4xx/interrupts.c
@@ -54,12 +54,12 @@ static struct irq_action irq_vecs1[32]; /* For UIC1 */
void uic1_interrupt( void * parms); /* UIC1 handler */
-#if defined(CONFIG_440_GX)
+#if defined(CONFIG_440GX)
static struct irq_action irq_vecs2[32]; /* For UIC2 */
void uic0_interrupt( void * parms); /* UIC0 handler */
void uic2_interrupt( void * parms); /* UIC2 handler */
-#endif /* CONFIG_440_GX */
+#endif /* CONFIG_440GX */
#endif /* CONFIG_440 */
@@ -115,11 +115,11 @@ int interrupt_init_cpu (unsigned *decrementer_count)
irq_vecs1[vec].handler = NULL;
irq_vecs1[vec].arg = NULL;
irq_vecs1[vec].count = 0;
-#if defined(CONFIG_440_GX)
+#if defined(CONFIG_440GX)
irq_vecs2[vec].handler = NULL;
irq_vecs2[vec].arg = NULL;
irq_vecs2[vec].count = 0;
-#endif /* CONFIG_440_GX */
+#endif /* CONFIG_440GX */
#endif
}
@@ -162,14 +162,14 @@ int interrupt_init_cpu (unsigned *decrementer_count)
set_evpr(0x00000000);
#if defined(CONFIG_440)
-#if !defined(CONFIG_440_GX)
+#if !defined(CONFIG_440GX)
/* Install the UIC1 handlers */
irq_install_handler(VECNUM_UIC1NC, uic1_interrupt, 0);
irq_install_handler(VECNUM_UIC1C, uic1_interrupt, 0);
#endif
#endif
-#if defined(CONFIG_440_GX)
+#if defined(CONFIG_440GX)
/* Take the GX out of compatibility mode
* Travis Sawyer, 9 Mar 2004
* NOTE: 440gx user manual inconsistency here
@@ -195,7 +195,7 @@ int interrupt_init_cpu (unsigned *decrementer_count)
/*
* Handle external interrupts
*/
-#if defined(CONFIG_440_GX)
+#if defined(CONFIG_440GX)
void external_interrupt(struct pt_regs *regs)
{
ulong uic_msr;
@@ -219,7 +219,7 @@ void external_interrupt(struct pt_regs *regs)
return;
-} /* external_interrupt CONFIG_440_GX */
+} /* external_interrupt CONFIG_440GX */
#else
@@ -266,7 +266,7 @@ void external_interrupt(struct pt_regs *regs)
}
#endif
-#if defined(CONFIG_440_GX)
+#if defined(CONFIG_440GX)
/* Handler for UIC0 interrupt */
void uic0_interrupt( void * parms)
{
@@ -310,7 +310,7 @@ void uic0_interrupt( void * parms)
}
}
-#endif /* CONFIG_440_GX */
+#endif /* CONFIG_440GX */
#if defined(CONFIG_440)
/* Handler for UIC1 interrupt */
@@ -357,7 +357,7 @@ void uic1_interrupt( void * parms)
}
#endif /* defined(CONFIG_440) */
-#if defined(CONFIG_440_GX)
+#if defined(CONFIG_440GX)
/* Handler for UIC1 interrupt */
void uic2_interrupt( void * parms)
{
@@ -400,7 +400,7 @@ void uic2_interrupt( void * parms)
vec++;
}
}
-#endif /* defined(CONFIG_440_GX) */
+#endif /* defined(CONFIG_440GX) */
/****************************************************************************/
@@ -414,7 +414,7 @@ void irq_install_handler (int vec, interrupt_handler_t * handler, void *arg)
int i = vec;
#if defined(CONFIG_440)
-#if defined(CONFIG_440_GX)
+#if defined(CONFIG_440GX)
if ((vec > 31) && (vec < 64)) {
i = vec - 32;
irqa = irq_vecs1;
@@ -422,12 +422,12 @@ void irq_install_handler (int vec, interrupt_handler_t * handler, void *arg)
i = vec - 64;
irqa = irq_vecs2;
}
-#else /* CONFIG_440_GX */
+#else /* CONFIG_440GX */
if (vec > 31) {
i = vec - 32;
irqa = irq_vecs1;
}
-#endif /* CONFIG_440_GX */
+#endif /* CONFIG_440GX */
#endif /* CONFIG_440 */
/*
@@ -441,13 +441,13 @@ void irq_install_handler (int vec, interrupt_handler_t * handler, void *arg)
irqa[i].arg = arg;
#if defined(CONFIG_440)
-#if defined(CONFIG_440_GX)
+#if defined(CONFIG_440GX)
if ((vec > 31) && (vec < 64))
mtdcr (uic1er, mfdcr (uic1er) | (0x80000000 >> i));
else if (vec > 63)
mtdcr (uic2er, mfdcr (uic2er) | (0x80000000 >> i));
else
-#endif /* CONFIG_440_GX */
+#endif /* CONFIG_440GX */
if (vec > 31)
mtdcr (uic1er, mfdcr (uic1er) | (0x80000000 >> i));
else
@@ -464,7 +464,7 @@ void irq_free_handler (int vec)
int i = vec;
#if defined(CONFIG_440)
-#if defined(CONFIG_440_GX)
+#if defined(CONFIG_440GX)
if ((vec > 31) && (vec < 64)) {
irqa = irq_vecs1;
i = vec - 32;
@@ -472,7 +472,7 @@ void irq_free_handler (int vec)
irqa = irq_vecs2;
i = vec - 64;
}
-#endif /* CONFIG_440_GX */
+#endif /* CONFIG_440GX */
if (vec > 31) {
irqa = irq_vecs1;
i = vec - 32;
@@ -485,13 +485,13 @@ void irq_free_handler (int vec)
#endif
#if defined(CONFIG_440)
-#if defined(CONFIG_440_GX)
+#if defined(CONFIG_440GX)
if ((vec > 31) && (vec < 64))
mtdcr (uic1er, mfdcr (uic1er) & ~(0x80000000 >> i));
else if (vec > 63)
mtdcr (uic2er, mfdcr (uic2er) & ~(0x80000000 >> i));
else
-#endif /* CONFIG_440_GX */
+#endif /* CONFIG_440GX */
if (vec > 31)
mtdcr (uic1er, mfdcr (uic1er) & ~(0x80000000 >> i));
else
@@ -553,7 +553,7 @@ do_irqinfo(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
printf("\n");
#endif
-#if defined(CONFIG_440_GX)
+#if defined(CONFIG_440GX)
printf ("\nUIC 2\n");
printf ("Nr Routine Arg Count\n");
diff --git a/cpu/ppc4xx/miiphy_440.c b/cpu/ppc4xx/miiphy_440.c
index bbe535acf99fd4361c716a23fded0eab88874904..6320feaba734315d5e3480b7a3c7660dc58ad93c 100644
--- a/cpu/ppc4xx/miiphy_440.c
+++ b/cpu/ppc4xx/miiphy_440.c
@@ -165,13 +165,13 @@ int miiphy_read (unsigned char addr, unsigned char reg, unsigned short *value)
}
sta_reg = reg; /* reg address */
/* set clock (50Mhz) and read flags */
-#if defined(CONFIG_440_GX)
+#if defined(CONFIG_440GX)
sta_reg |= EMAC_STACR_READ;
#else
sta_reg = (sta_reg | EMAC_STACR_READ) & ~EMAC_STACR_CLK_100MHZ;
#endif
-#if defined(CONFIG_PHY_CLK_FREQ) && !defined(CONFIG_440_GX)
+#if defined(CONFIG_PHY_CLK_FREQ) && !defined(CONFIG_440GX)
sta_reg = sta_reg | CONFIG_PHY_CLK_FREQ;
#endif
sta_reg = sta_reg | (addr << 5); /* Phy address */
@@ -225,13 +225,13 @@ int miiphy_write (unsigned char addr, unsigned char reg, unsigned short value)
sta_reg = 0;
sta_reg = reg; /* reg address */
/* set clock (50Mhz) and read flags */
-#if defined(CONFIG_440_GX)
+#if defined(CONFIG_440GX)
sta_reg |= EMAC_STACR_WRITE;
#else
sta_reg = (sta_reg | EMAC_STACR_WRITE) & ~EMAC_STACR_CLK_100MHZ;
#endif
-#if defined(CONFIG_PHY_CLK_FREQ) && !defined(CONFIG_440_GX)
+#if defined(CONFIG_PHY_CLK_FREQ) && !defined(CONFIG_440GX)
sta_reg = sta_reg | CONFIG_PHY_CLK_FREQ; /* Set clock frequency (PLB freq. dependend) */
#endif
sta_reg = sta_reg | ((unsigned long) addr << 5); /* Phy address */
diff --git a/cpu/ppc4xx/serial.c b/cpu/ppc4xx/serial.c
index 92f8ddb2edf2b248a33b3de1a8b8ee99223a72f8..8cf7dab3a29e36fe82abe70c70ab62acce397372 100644
--- a/cpu/ppc4xx/serial.c
+++ b/cpu/ppc4xx/serial.c
@@ -269,14 +269,14 @@ int serial_tstc ()
#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || defined(CONFIG_440) || defined(CONFIG_405EP)
#if defined(CONFIG_440)
-#if defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
+#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
#define UART0_BASE CFG_PERIPHERAL_BASE + 0x00000300
#define UART1_BASE CFG_PERIPHERAL_BASE + 0x00000400
#else
#define UART0_BASE CFG_PERIPHERAL_BASE + 0x00000200
#define UART1_BASE CFG_PERIPHERAL_BASE + 0x00000300
#endif
-#if defined(CONFIG_440_GX) || defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
+#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || defined(CONFIG_440GR)
#define CR0_MASK 0xdfffffff
#define CR0_EXTCLK_ENA 0x00800000
#define CR0_UDIV_POS 0
@@ -284,7 +284,7 @@ int serial_tstc ()
#define CR0_MASK 0x3fff0000
#define CR0_EXTCLK_ENA 0x00600000
#define CR0_UDIV_POS 16
-#endif /* CONFIG_440_GX */
+#endif /* CONFIG_440GX */
#elif defined(CONFIG_405EP)
#define UART0_BASE 0xef600300
#define UART1_BASE 0xef600400
@@ -306,17 +306,17 @@ int serial_tstc ()
#if defined(CONFIG_UART1_CONSOLE)
#define ACTING_UART0_BASE UART1_BASE
#define ACTING_UART1_BASE UART0_BASE
-#if defined(CONFIG_440_GX) || defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
+#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || defined(CONFIG_440GR)
#define UART0_SDR sdr_uart1
#define UART1_SDR sdr_uart0
-#endif /* CONFIG_440_GX */
+#endif /* CONFIG_440GX */
#else
#define ACTING_UART0_BASE UART0_BASE
#define ACTING_UART1_BASE UART1_BASE
-#if defined(CONFIG_440_GX) || defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
+#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || defined(CONFIG_440GR)
#define UART0_SDR sdr_uart0
#define UART1_SDR sdr_uart1
-#endif /* CONFIG_440_GX */
+#endif /* CONFIG_440GX */
#endif
#if defined(CONFIG_405EP) && defined(CFG_EXT_SERIAL_CLOCK)
@@ -436,7 +436,7 @@ int serial_init(void)
unsigned long tmp;
#endif
-#if defined(CONFIG_440_GX)
+#if defined(CONFIG_440GX)
#if defined(CONFIG_SERIAL_MULTI)
if (UART0_BASE == dev_base) {
mfsdr(UART0_SDR,reg);
@@ -451,7 +451,7 @@ int serial_init(void)
#endif
#else
reg = mfdcr(cntrl0) & ~CR0_MASK;
-#endif /* CONFIG_440_GX */
+#endif /* CONFIG_440GX */
#ifdef CFG_EXT_SERIAL_CLOCK
reg |= CR0_EXTCLK_ENA;
udiv = 1;
@@ -465,7 +465,7 @@ int serial_init(void)
serial_divs (gd->baudrate, &udiv, &bdiv);
#endif
-#if defined(CONFIG_440_GX) || defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
+#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || defined(CONFIG_440GR)
reg |= udiv << CR0_UDIV_POS; /* set the UART divisor */
#if defined(CONFIG_SERIAL_MULTI)
if (UART0_BASE == dev_base) {
diff --git a/cpu/ppc4xx/spd_sdram.c b/cpu/ppc4xx/spd_sdram.c
index e2eab629ffa736f550ae00b983345e4350f85d61..a8cfcd4e75888129f2f1555bdd1e1aaa7cd85299 100644
--- a/cpu/ppc4xx/spd_sdram.c
+++ b/cpu/ppc4xx/spd_sdram.c
@@ -734,7 +734,7 @@ long int spd_sdram(void) {
*/
check_volt_type(dimm_populated, iic0_dimm_addr, num_dimm_banks);
-#if defined(CONFIG_440_GX)
+#if defined(CONFIG_440GX)
/*
* Soft-reset SDRAM controller.
*/
diff --git a/cpu/ppc4xx/speed.c b/cpu/ppc4xx/speed.c
index 7a4af75efe80adbdeb2c71722345f23829552605..469f97d6f0cf47246399256b7b8205e1796dfb71 100644
--- a/cpu/ppc4xx/speed.c
+++ b/cpu/ppc4xx/speed.c
@@ -195,7 +195,7 @@ ulong get_PCI_freq (void)
#elif defined(CONFIG_440)
-#if defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
+#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
void get_sys_info (sys_info_t *sysInfo)
{
unsigned long temp;
@@ -283,7 +283,7 @@ ulong get_PCI_freq (void)
return sys_info.freqPCI;
}
-#elif !defined(CONFIG_440_GX)
+#elif !defined(CONFIG_440GX)
void get_sys_info (sys_info_t * sysInfo)
{
unsigned long strp0;
diff --git a/cpu/ppc4xx/start.S b/cpu/ppc4xx/start.S
index 730f3ca801b22b8dfa5d8da31a6a34cb2c392ad5..003c5b6bf19cc9bf7ae1383eb9cc569aaf096257 100644
--- a/cpu/ppc4xx/start.S
+++ b/cpu/ppc4xx/start.S
@@ -166,7 +166,7 @@ _start_440:
mtspr srr1,r0
mtspr csrr0,r0
mtspr csrr1,r0
-#if defined (CONFIG_440_GX) /* NOTE: 440GX adds machine check status regs */
+#if defined (CONFIG_440GX) /* NOTE: 440GX adds machine check status regs */
mtspr mcsrr0,r0
mtspr mcsrr1,r0
mfspr r1, mcsr
@@ -340,11 +340,11 @@ _start:
mtspr tcr,r0 /* disable all */
mtspr esr,r0 /* clear exception syndrome register */
mtxer r0 /* clear integer exception register */
-#if !defined(CONFIG_440_GX)
+#if !defined(CONFIG_440GX)
lis r1,0x0002 /* set CE bit (Critical Exceptions) */
ori r1,r1,0x1000 /* set ME bit (Machine Exceptions) */
mtmsr r1 /* change MSR */
-#elif !defined(CONFIG_440_EP) && !defined(CONFIG_440_GR)
+#elif !defined(CONFIG_440EP) && !defined(CONFIG_440GR)
bl __440gx_msr_set
b __440gx_msr_continue
@@ -377,7 +377,7 @@ __440gx_msr_continue:
/* Setup the internal SRAM */
/*----------------------------------------------------------------*/
li r0,0
-#if defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
+#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
/* Clear Dcache to use as RAM */
addis r3,r0,CFG_INIT_RAM_ADDR@h
ori r3,r3,CFG_INIT_RAM_ADDR@l
@@ -394,7 +394,7 @@ __440gx_msr_continue:
addi r3,r3,32
bdnz ..d_ag
#else
-#if defined (CONFIG_440_GX)
+#if defined (CONFIG_440GX)
mtdcr l2_cache_cfg,r0 /* Ensure L2 Cache is off */
#endif
mtdcr isram0_sb1cr,r0 /* Disable bank 1 */
@@ -409,7 +409,7 @@ __440gx_msr_continue:
mtdcr isram0_pmeg,r1
lis r1,0x8000 /* BAS = 8000_0000 */
-#if defined(CONFIG_440_GX)
+#if defined(CONFIG_440GX)
ori r1,r1,0x0980 /* first 64k */
mtdcr isram0_sb0cr,r1
lis r1,0x8001
@@ -975,7 +975,7 @@ invalidate_icache:
invalidate_dcache:
addi r6,0,0x0000 /* clear GPR 6 */
/* Do loop for # of dcache congruence classes. */
-#if defined(CONFIG_440_GX) || defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
+#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || defined(CONFIG_440GR)
lis r7, (CFG_DCACHE_SIZE / CFG_CACHELINE_SIZE / 2)@ha /* TBS for large sized cache */
ori r7, r7, (CFG_DCACHE_SIZE / CFG_CACHELINE_SIZE / 2)@l
#else
@@ -1001,7 +1001,7 @@ flush_dcache:
mtdccr r10
/* do loop for # of congruence classes. */
-#if defined(CONFIG_440_GX) || defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
+#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || defined(CONFIG_440GR)
lis r10,(CFG_DCACHE_SIZE / CFG_CACHELINE_SIZE / 2)@ha /* TBS: for large cache sizes */
ori r10,r10,(CFG_DCACHE_SIZE / CFG_CACHELINE_SIZE / 2)@l
lis r11,(CFG_DCACHE_SIZE / 2)@ha /* D cache set size - 2 way sets */
@@ -1228,7 +1228,7 @@ ppcSync:
*/
.globl relocate_code
relocate_code:
-#if defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
+#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
dccci 0,0 /* Invalidate data cache, now no longer our stack */
sync
addi r1,r0,0x0000 /* Tlb entry #0 */
diff --git a/cpu/ppc4xx/usb_ohci.c b/cpu/ppc4xx/usb_ohci.c
index d53909e4e25c37faa510458d38a036be3257397a..bb5765891f8c4c3f98aa361f7d11f0ba9949db9d 100644
--- a/cpu/ppc4xx/usb_ohci.c
+++ b/cpu/ppc4xx/usb_ohci.c
@@ -76,7 +76,7 @@
#define m16_swap(x) swap_16(x)
#define m32_swap(x) swap_32(x)
-#ifdef CONFIG_440_EP
+#ifdef CONFIG_440EP
#define ohci_cpu_to_le16(x) (x)
#define ohci_cpu_to_le32(x) (x)
#else
diff --git a/cpu/ppc4xx/usbdev.c b/cpu/ppc4xx/usbdev.c
index 4741f73197bca4c934050e22f0ff203e639eeedd..8262c54bef144d1401f52d476fb9df3d3c893c32 100644
--- a/cpu/ppc4xx/usbdev.c
+++ b/cpu/ppc4xx/usbdev.c
@@ -3,7 +3,7 @@
#include <common.h>
#include <asm/processor.h>
-#ifdef CONFIG_440_EP
+#ifdef CONFIG_440EP
#include <usb.h>
#include "usbdev.h"
@@ -211,4 +211,4 @@ void usb_dev_init()
NULL);
}
-#endif /*CONFIG_440_EP */
+#endif /*CONFIG_440EP */
diff --git a/drivers/pci_indirect.c b/drivers/pci_indirect.c
index 4923209d6801559721098b6da9eef6dd3c8ec917..5987ac46a64b23ad03d4be1576ca05341c6019a4 100644
--- a/drivers/pci_indirect.c
+++ b/drivers/pci_indirect.c
@@ -52,7 +52,7 @@ indirect_##rw##_config_##size(struct pci_controller *hose, \
cfg_##rw(val, hose->cfg_data + (offset & mask), type, op); \
return 0; \
}
-#elif defined(CONFIG_440_GX) || defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
+#elif defined(CONFIG_440GX) || defined(CONFIG_440EP) || defined(CONFIG_440GR)
#define INDIRECT_PCI_OP(rw, size, type, op, mask) \
static int \
indirect_##rw##_config_##size(struct pci_controller *hose, \
diff --git a/fs/jffs2/jffs2_1pass.c b/fs/jffs2/jffs2_1pass.c
index 5180107f485030c2439108d65ad54f02a87e3fa9..667ae15e6d156a3cf995ae34f01e113b2b4dd83e 100644
--- a/fs/jffs2/jffs2_1pass.c
+++ b/fs/jffs2/jffs2_1pass.c
@@ -278,13 +278,13 @@ static inline void *get_node_mem_nor(u32 off)
/*
- * Generic jffs2 raw memory and node read routines.
+ * Generic jffs2 raw memory and node read routines.
*
*/
static inline void *get_fl_mem(u32 off, u32 size, void *ext_buf)
{
struct mtdids *id = current_part->dev->id;
-
+
#if (CONFIG_COMMANDS & CFG_CMD_FLASH)
if (id->type == MTD_DEV_TYPE_NOR)
return get_fl_mem_nor(off);
@@ -302,7 +302,7 @@ static inline void *get_fl_mem(u32 off, u32 size, void *ext_buf)
static inline void *get_node_mem(u32 off)
{
struct mtdids *id = current_part->dev->id;
-
+
#if (CONFIG_COMMANDS & CFG_CMD_FLASH)
if (id->type == MTD_DEV_TYPE_NOR)
return get_node_mem_nor(off);
diff --git a/include/405gp_enet.h b/include/405gp_enet.h
index 233ea1113a2858bae448025dff587d42932b2e7a..b9bdaaf7cd63182bb0d32456dec64e8593c42f44 100644
--- a/include/405gp_enet.h
+++ b/include/405gp_enet.h
@@ -67,7 +67,7 @@ struct arp_entry {
/*Register addresses */
#if defined(CONFIG_440)
-#if defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
+#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
#define ZMII_BASE (CFG_PERIPHERAL_BASE + 0x0D00)
#else
#define ZMII_BASE (CFG_PERIPHERAL_BASE + 0x0780)
@@ -81,7 +81,7 @@ struct arp_entry {
#endif /* CONFIG_440 */
#if defined(CONFIG_440)
-#if defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
+#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
#define EMAC_BASE (CFG_PERIPHERAL_BASE + 0x0E00)
#else
#define EMAC_BASE (CFG_PERIPHERAL_BASE + 0x0800)
diff --git a/include/440_i2c.h b/include/440_i2c.h
index 9fdf7d8d0ad2befb49afa4b1fbe87d7e89a34032..9c90a9e3c4876170d83180c989ef7b6bf92967b4 100644
--- a/include/440_i2c.h
+++ b/include/440_i2c.h
@@ -1,11 +1,11 @@
#ifndef _440_i2c_h_
#define _440_i2c_h_
-#if defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
+#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
#define I2C_BASE_ADDR (CFG_PERIPHERAL_BASE + 0x00000700)
#else
#define I2C_BASE_ADDR (CFG_PERIPHERAL_BASE + 0x00000400)
-#endif /*CONFIG_440_EP CONFIG_440_GR*/
+#endif /*CONFIG_440EP CONFIG_440GR*/
#define I2C_REGISTERS_BASE_ADDRESS I2C_BASE_ADDR
#define IIC_MDBUF (I2C_REGISTERS_BASE_ADDRESS+IICMDBUF)
diff --git a/include/440gx_enet.h b/include/440gx_enet.h
index 190b454cb48a951a3f07d4b3fe72d0bbabd4b2aa..45c2f46e636471588b4b74774ed53dcb21f4fabc 100644
--- a/include/440gx_enet.h
+++ b/include/440gx_enet.h
@@ -130,9 +130,9 @@ typedef struct emac_440gx_hw_st {
} EMAC_440GX_HW_ST, *EMAC_440GX_HW_PST;
-#if defined(CONFIG_440_GX)
+#if defined(CONFIG_440GX)
#define EMAC_NUM_DEV 4
-#elif defined(CONFIG_440) && !defined(CONFIG_440_GX)
+#elif defined(CONFIG_440) && !defined(CONFIG_440GX)
#define EMAC_NUM_DEV 2
#else
#warning Bad configuration
@@ -140,7 +140,7 @@ typedef struct emac_440gx_hw_st {
/*ZMII Bridge Register addresses */
-#if defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
+#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
#define ZMII_BASE (CFG_PERIPHERAL_BASE + 0x0D00)
#else
#define ZMII_BASE (CFG_PERIPHERAL_BASE + 0x0780)
@@ -212,7 +212,7 @@ typedef struct emac_440gx_hw_st {
/*---------------------------------------------------------------------------+
| TCP/IP Acceleration Hardware (TAH) 440GX Only
+---------------------------------------------------------------------------*/
-#if defined(CONFIG_440_GX)
+#if defined(CONFIG_440GX)
#define TAH_BASE (CFG_PERIPHERAL_BASE + 0x0B50)
#define TAH_REVID (TAH_BASE + 0x0) /* Revision ID (RO)*/
#define TAH_MR (TAH_BASE + 0x10) /* Mode Register (R/W) */
@@ -272,11 +272,11 @@ typedef struct emac_440gx_hw_st {
#define TAH_TSR_TFPE (0x00080000) /* Transmit FIFO parity error */
#define TAH_TSR_SSTS (0x00040000) /* Segment size too small */
#define TAH_TSR_RSVD (0x0003FFFF) /* Reserved */
-#endif /* CONFIG_440_GX */
+#endif /* CONFIG_440GX */
/* Ethernet MAC Regsiter Addresses */
-#if defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
+#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
#define EMAC_BASE (CFG_PERIPHERAL_BASE + 0x0E00)
#else
#define EMAC_BASE (CFG_PERIPHERAL_BASE + 0x0800)
@@ -319,7 +319,7 @@ typedef struct emac_440gx_hw_st {
#define EMAC_M0_WKE (0x04000000)
/* on 440GX EMAC_MR1 has a different layout! */
-#if defined(CONFIG_440_GX)
+#if defined(CONFIG_440GX)
/* MODE Reg 1 */
#define EMAC_M1_FDE (0x80000000)
#define EMAC_M1_ILE (0x40000000)
@@ -349,7 +349,7 @@ typedef struct emac_440gx_hw_st {
#define EMAC_M1_OBCI_83 (0x00000010)
#define EMAC_M1_OBCI_66 (0x00000008)
#define EMAC_M1_RSVD1 (0x00000007)
-#else /* defined(CONFIG_440_GX) */
+#else /* defined(CONFIG_440GX) */
/* EMAC_MR1 is the same on 405GP, 405GPr, 405EP, 440GP, 440EP */
#define EMAC_M1_FDE 0x80000000
#define EMAC_M1_ILE 0x40000000
@@ -369,10 +369,10 @@ typedef struct emac_440gx_hw_st {
#define EMAC_M1_TR0_MULTI 0x00008000
#define EMAC_M1_TR1_DEPEND 0x00004000
#define EMAC_M1_TR1_MULTI 0x00002000
-#if defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
+#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
#define EMAC_M1_JUMBO_ENABLE 0x00001000
-#endif /* defined(CONFIG_440_EP) || defined(CONFIG_440_GR) */
-#endif /* defined(CONFIG_440_GX) */
+#endif /* defined(CONFIG_440EP) || defined(CONFIG_440GR) */
+#endif /* defined(CONFIG_440GX) */
/* Transmit Mode Register 0 */
#define EMAC_TXM0_GNP0 (0x80000000)
diff --git a/include/asm-ppc/u-boot.h b/include/asm-ppc/u-boot.h
index 5b6cd6f966006c727c18fa63314e1ef98df1e774..161a29506b1b572c7354b40087132aaf1c4a0c0c 100644
--- a/include/asm-ppc/u-boot.h
+++ b/include/asm-ppc/u-boot.h
@@ -101,19 +101,19 @@ typedef struct bd_info {
unsigned char bi_enet3addr[6];
#endif
-#if defined(CONFIG_405GP) || defined(CONFIG_405EP) || defined (CONFIG_440_GX) || \
- defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
+#if defined(CONFIG_405GP) || defined(CONFIG_405EP) || defined (CONFIG_440GX) || \
+ defined(CONFIG_440EP) || defined(CONFIG_440GR)
unsigned int bi_opbfreq; /* OPB clock in Hz */
int bi_iic_fast[2]; /* Use fast i2c mode */
#endif
#if defined(CONFIG_NX823)
unsigned char bi_sernum[8];
#endif
-#if defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
+#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
int bi_phynum[2]; /* Determines phy mapping */
int bi_phymode[2]; /* Determines phy mode */
#endif
-#if defined(CONFIG_440_GX)
+#if defined(CONFIG_440GX)
int bi_phynum[4]; /* Determines phy mapping */
int bi_phymode[4]; /* Determines phy mode */
#endif
diff --git a/include/configs/NETTA.h b/include/configs/NETTA.h
index 3573b3711dc75be30e003cd9ab44894f638b2945..1bcd88d208a3ea3027f9b2dc0a4339c23e4781c6 100644
--- a/include/configs/NETTA.h
+++ b/include/configs/NETTA.h
@@ -694,7 +694,7 @@
/* No command line, one static partition, whole device */
#undef CONFIG_JFFS2_CMDLINE
#define CONFIG_JFFS2_DEV "nand0"
-#define CONFIG_JFFS2_PART_SIZE 0x00100000
+#define CONFIG_JFFS2_PART_SIZE 0x00100000
#define CONFIG_JFFS2_PART_OFFSET 0x00200000
/* mtdparts command line support */
diff --git a/include/configs/XPEDITE1K.h b/include/configs/XPEDITE1K.h
index 023570077e0e1b777615b93d49ecee9e01ea241b..347bb50332944f91260366261da8d5a9810294e4 100644
--- a/include/configs/XPEDITE1K.h
+++ b/include/configs/XPEDITE1K.h
@@ -36,7 +36,7 @@
#define CONFIG_XPEDITE1K 1 /* Board is XPedite 1000 */
#define CONFIG_4xx 1 /* ... PPC4xx family */
#define CONFIG_440 1
-#define CONFIG_440_GX 1 /* 440 GX */
+#define CONFIG_440GX 1 /* 440 GX */
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */
#undef CFG_DRAM_TEST /* Disable-takes long time! */
#define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */
diff --git a/include/configs/aev.h b/include/configs/aev.h
new file mode 100644
index 0000000000000000000000000000000000000000..ca6e52b2829bbf2718f59c4810f538d97d491545
--- /dev/null
+++ b/include/configs/aev.h
@@ -0,0 +1,401 @@
+/*
+ * (C) Copyright 2003-2005
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2004-2005
+ * Martin Krause, TQ-Systems GmbH, martin.krause@tqs.de
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+
+#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */
+#define CONFIG_MPC5200 1 /* (more precisely an MPC5200 CPU) */
+#define CONFIG_TQM5200 1 /* ... on TQM5200 module */
+#undef CONFIG_TQM5200_REV100 /* define for revision 100 modules */
+#define CONFIG_STK52XX 1 /* ... on a STK52XX base board */
+#define CONFIG_STK52XX_REV100 1 /* define for revision 100 baseboards */
+#define CONFIG_AEVFIFO 1
+#define CFG_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */
+
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+#endif
+
+/*
+ * Serial console configuration
+ */
+#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */
+#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */
+#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
+
+/*
+ * PCI Mapping:
+ * 0x40000000 - 0x4fffffff - PCI Memory
+ * 0x50000000 - 0x50ffffff - PCI IO Space
+ */
+#ifdef CONFIG_AEVFIFO
+#define CONFIG_PCI 1
+#define CONFIG_PCI_PNP 1
+/* #define CONFIG_PCI_SCAN_SHOW 1 */
+
+#define CONFIG_PCI_MEM_BUS 0x40000000
+#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS
+#define CONFIG_PCI_MEM_SIZE 0x10000000
+
+#define CONFIG_PCI_IO_BUS 0x50000000
+#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS
+#define CONFIG_PCI_IO_SIZE 0x01000000
+
+#define CONFIG_NET_MULTI 1
+#define CONFIG_EEPRO100 1
+#define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
+#define CONFIG_NS8382X 1
+#endif /* CONFIG_AEVFIFO */
+
+/* Partitions */
+#define CONFIG_MAC_PARTITION
+#define CONFIG_DOS_PARTITION
+#define CONFIG_ISO_PARTITION
+
+/* POST support */
+#define CONFIG_POST (CFG_POST_MEMORY | \
+ CFG_POST_CPU | \
+ CFG_POST_I2C)
+
+#ifdef CONFIG_POST
+#define CFG_CMD_POST_DIAG CFG_CMD_DIAG
+/* preserve space for the post_word at end of on-chip SRAM */
+#define MPC5XXX_SRAM_POST_SIZE MPC5XXX_SRAM_SIZE-4
+#else
+#define CFG_CMD_POST_DIAG 0
+#endif
+
+/*
+ * Supported commands
+ */
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
+ ADD_BMP_CMD | \
+ CFG_CMD_PCI | \
+ CFG_CMD_ASKENV | \
+ CFG_CMD_DATE | \
+ CFG_CMD_DHCP | \
+ CFG_CMD_ECHO | \
+ CFG_CMD_EEPROM | \
+ CFG_CMD_I2C | \
+ CFG_CMD_MII | \
+ CFG_CMD_NFS | \
+ CFG_CMD_PING | \
+ CFG_CMD_POST_DIAG | \
+ CFG_CMD_REGINFO | \
+ CFG_CMD_SNTP )
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+#define CONFIG_TIMESTAMP /* display image timestamps */
+
+#if (TEXT_BASE == 0xFC000000) /* Boot low */
+# define CFG_LOWBOOT 1
+#endif
+
+/*
+ * Autobooting
+ */
+#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
+
+#define CONFIG_PREBOOT "echo;" \
+ "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
+ "echo"
+
+#undef CONFIG_BOOTARGS
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "netdev=eth0\0" \
+ "rootpath=/opt/eldk/ppc_6xx\0" \
+ "ramargs=setenv bootargs root=/dev/ram rw\0" \
+ "nfsargs=setenv bootargs root=/dev/nfs rw " \
+ "nfsroot=$(serverip):$(rootpath) " \
+ "console=ttyS0,$(baudrate)\0" \
+ "addip=setenv bootargs $(bootargs) " \
+ "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)" \
+ ":$(hostname):$(netdev):off panic=1\0" \
+ "flash_self=run ramargs addip;" \
+ "bootm $(kernel_addr) $(ramdisk_addr)\0" \
+ "flash_nfs=run nfsargs addip;" \
+ "bootm $(kernel_addr)\0" \
+ "net_nfs=tftp 200000 $(bootfile);run nfsargs addip;bootm\0" \
+ "bootfile=/tftpboot/tqm5200/uImage\0" \
+ "load=tftp 200000 $(u-boot)\0" \
+ "u-boot=/tftpboot/tqm5200/u-boot.bin\0" \
+ "update=protect off FC000000 FC05FFFF;" \
+ "erase FC000000 FC05FFFF;" \
+ "cp.b 200000 FC000000 $(filesize);" \
+ "protect on FC000000 FC05FFFF\0" \
+ ""
+
+#define CONFIG_BOOTCOMMAND "run net_nfs"
+
+/*
+ * IPB Bus clocking configuration.
+ */
+#define CFG_IPBSPEED_133 /* define for 133MHz speed */
+
+#if defined(CFG_IPBSPEED_133)
+/*
+ * PCI Bus clocking configuration
+ *
+ * Actually a PCI Clock of 66 MHz is only set (in cpu_init.c) if
+ * CFG_IPBSPEED_133 is defined. This is because a PCI Clock of 66 MHz yet hasn't
+ * been tested with a IPB Bus Clock of 66 MHz.
+ */
+#define CFG_PCISPEED_66 /* define for 66MHz speed */
+#endif
+
+/*
+ * I2C configuration
+ */
+#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
+#ifdef CONFIG_TQM5200_REV100
+#define CFG_I2C_MODULE 1 /* Select I2C module #1 for rev. 100 board */
+#else
+#define CFG_I2C_MODULE 2 /* Select I2C module #2 for all other revs */
+#endif
+
+/*
+ * I2C clock frequency
+ *
+ * Please notice, that the resulting clock frequency could differ from the
+ * configured value. This is because the I2C clock is derived from system
+ * clock over a frequency divider with only a few divider values. U-boot
+ * calculates the best approximation for CFG_I2C_SPEED. However the calculated
+ * approximation allways lies below the configured value, never above.
+ */
+#define CFG_I2C_SPEED 100000 /* 100 kHz */
+#define CFG_I2C_SLAVE 0x7F
+
+/*
+ * EEPROM configuration for onboard EEPROM M24C32 (M24C64 should work
+ * also). For other EEPROMs configuration should be verified. On Mini-FAP the
+ * EEPROM (24C64) is on the same I2C address (but on other I2C bus), so the
+ * same configuration could be used.
+ */
+#define CFG_I2C_EEPROM_ADDR 0x50 /* 1010000x */
+#define CFG_I2C_EEPROM_ADDR_LEN 2
+#define CFG_EEPROM_PAGE_WRITE_BITS 5 /* =32 Bytes per write */
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 20
+
+/*
+ * Flash configuration
+ */
+#define CFG_FLASH_BASE TEXT_BASE /* 0xFC000000 */
+
+/* use CFI flash driver if no module variant is spezified */
+#define CFG_FLASH_CFI 1 /* Flash is CFI conformant */
+#define CFG_FLASH_CFI_DRIVER 1 /* Use the common driver */
+#define CFG_FLASH_BANKS_LIST { CFG_BOOTCS_START }
+#define CFG_FLASH_EMPTY_INFO
+#define CFG_FLASH_SIZE 0x04000000 /* 64 MByte */
+#define CFG_MAX_FLASH_SECT 512 /* max num of sects on one chip */
+#undef CFG_FLASH_USE_BUFFER_WRITE /* not supported yet for AMD */
+
+#if !defined(CFG_LOWBOOT)
+#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x00760000 + 0x00800000)
+#else /* CFG_LOWBOOT */
+#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x00060000)
+#endif /* CFG_LOWBOOT */
+#define CFG_MAX_FLASH_BANKS 1 /* max num of flash banks
+ (= chip selects) */
+#define CFG_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms) */
+#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */
+
+
+/*
+ * Environment settings
+ */
+#define CFG_ENV_IS_IN_FLASH 1
+#define CFG_ENV_SIZE 0x10000
+#define CFG_ENV_SECT_SIZE 0x20000
+#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR + CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
+
+/*
+ * Memory map
+ */
+#define CFG_MBAR 0xF0000000
+#define CFG_SDRAM_BASE 0x00000000
+#define CFG_DEFAULT_MBAR 0x80000000
+
+/* Use ON-Chip SRAM until RAM will be available */
+#define CFG_INIT_RAM_ADDR MPC5XXX_SRAM
+#ifdef CONFIG_POST
+/* preserve space for the post_word at end of on-chip SRAM */
+#define CFG_INIT_RAM_END MPC5XXX_SRAM_POST_SIZE
+#else
+#define CFG_INIT_RAM_END MPC5XXX_SRAM_SIZE
+#endif
+
+
+#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+
+#define CFG_MONITOR_BASE TEXT_BASE
+#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
+# define CFG_RAMBOOT 1
+#endif
+
+#define CFG_MONITOR_LEN (384 << 10) /* Reserve 384 kB for Monitor */
+#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+
+/*
+ * Ethernet configuration
+ */
+#define CONFIG_MPC5xxx_FEC 1
+/*
+ * Define CONFIG_FEC_10MBIT to force FEC at 10Mb
+ */
+/* #define CONFIG_FEC_10MBIT 1 */
+#define CONFIG_PHY_ADDR 0x00
+
+/*
+ * GPIO configuration
+ *
+ * use pin gpio_wkup_6 as second SDRAM chip select (mem_cs1):
+ * Bit 0 (mask: 0x80000000): 1
+ * use ALT CAN position: Bits 2-3 (mask: 0x30000000):
+ * 00 -> No Alternatives, CAN1/2 on PSC2 according to PSC2 setting.
+ * 01 -> CAN1 on I2C1, CAN2 on Tmr0/1.
+ * Use for REV200 STK52XX boards. Do not use with REV100 modules
+ * (because, there I2C1 is used as I2C bus)
+ * use PSC1 as UART: Bits 28-31 (mask: 0x00000007): 0100
+ * use PSC2 as CAN: Bits 25:27 (mask: 0x00000030)
+ * 000 -> All PSC2 pins are GIOPs
+ * 001 -> CAN1/2 on PSC2 pins
+ * Use for REV100 STK52xx boards
+ * use PSC6:
+ * on STK52xx:
+ * use as UART. Pins PSC6_0 to PSC6_3 are used.
+ * Bits 9:11 (mask: 0x00700000):
+ * 101 -> PSC6 : Extended POST test is not available
+ * on MINI-FAP and TQM5200_IB:
+ * use PSC6_0 to PSC6_3 as GPIO: Bits 9:11 (mask: 0x00700000):
+ * 000 -> PSC6 could not be used as UART, CODEC or IrDA
+ * GPIO on PSC6_3 is used in post_hotkeys_pressed() to enable extended POST
+ * tests.
+ */
+#define CFG_GPS_PORT_CONFIG 0x81500014
+
+/*
+ * RTC configuration
+ */
+#define CONFIG_RTC_MPC5200 1 /* use internal MPC5200 RTC */
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+/* Enable an alternate, more extensive memory test */
+#define CFG_ALT_MEMTEST
+
+#define CFG_MEMTEST_START 0x00100000 /* memtest works on */
+#define CFG_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */
+
+#define CFG_LOAD_ADDR 0x100000 /* default load address */
+
+#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+
+/*
+ * Enable loopw commando. This has only affect, if CFG_CMD_MEM is defined,
+ * which is normally part of the default commands (CFV_CMD_DFL)
+ */
+#define CONFIG_LOOPW
+
+/*
+ * Various low-level settings
+ */
+#if defined(CONFIG_MPC5200)
+#define CFG_HID0_INIT HID0_ICE | HID0_ICFI
+#define CFG_HID0_FINAL HID0_ICE
+#else
+#define CFG_HID0_INIT 0
+#define CFG_HID0_FINAL 0
+#endif
+
+#define CFG_BOOTCS_START CFG_FLASH_BASE
+#define CFG_BOOTCS_SIZE CFG_FLASH_SIZE
+#ifdef CFG_PCISPEED_66
+#define CFG_BOOTCS_CFG 0x0008DF30 /* for pci_clk = 66 MHz */
+#else
+#define CFG_BOOTCS_CFG 0x0004DF30 /* for pci_clk = 33 MHz */
+#endif
+#define CFG_CS0_START CFG_FLASH_BASE
+#define CFG_CS0_SIZE CFG_FLASH_SIZE
+
+/* automatic configuration of chip selects */
+#ifdef CONFIG_CS_AUTOCONF
+#define CONFIG_LAST_STAGE_INIT
+#endif
+
+/*
+ * SRAM - Do not map below 2 GB in address space, because this area is used
+ * for SDRAM autosizing.
+ */
+#define CFG_CS2_START 0xE5000000
+#define CFG_CS2_SIZE 0x80000 /* 512 kByte */
+#define CFG_CS2_CFG 0x0004D930
+
+/*
+ * Grafic controller - Do not map below 2 GB in address space, because this
+ * area is used for SDRAM autosizing.
+ */
+#define SM501_FB_BASE 0xE0000000
+#define CFG_CS1_START (SM501_FB_BASE)
+#define CFG_CS1_SIZE 0x4000000 /* 64 MByte */
+#define CFG_CS1_CFG 0x8F48FF70
+#define SM501_MMIO_BASE CFG_CS1_START + 0x03E00000
+
+#define CFG_CS_BURST 0x00000000
+#define CFG_CS_DEADCYCLE 0x33333311 /* 1 dead cycle for flash and SM501 */
+
+#define CFG_RESET_ADDRESS 0xff000000
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/bamboo.h b/include/configs/bamboo.h
index bb5685a66568e104cb659d2ceb6cf3c6516f6b5e..64ea6bef91ff602b139a13d013e5c7ed86beb675 100644
--- a/include/configs/bamboo.h
+++ b/include/configs/bamboo.h
@@ -31,12 +31,19 @@
* High Level Configuration Options
*----------------------------------------------------------------------*/
#define CONFIG_BAMBOO 1 /* Board is BAMBOO */
-#define CONFIG_440_EP 1 /* Specific PPC440EP support */
-
+#define CONFIG_440EP 1 /* Specific PPC440EP support */
#define CONFIG_4xx 1 /* ... PPC4xx family */
-#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
#define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */
+#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
+
+/*
+ * Please note that, if NAND support is enabled, the 2nd ethernet port
+ * can't be used because of pin multiplexing. So, if you want to use the
+ * 2nd ethernet port you have to "undef" the following define.
+ */
+#define CONFIG_BAMBOO_NAND 1 /* enable nand flash support */
+
/*-----------------------------------------------------------------------
* Base addresses -- Note these are effective addresses where the
* actual resources get mapped (not physical addresses)
@@ -58,13 +65,15 @@
#define CFG_USB_DEVICE 0x50000000
#define CFG_NVRAM_BASE_ADDR 0x80000000
-#define CFG_BCSR_BASE (CFG_NVRAM_BASE_ADDR | 0x2000)
+#define CFG_BOOT_BASE_ADDR 0xf0000000
+#define CFG_NAND_ADDR 0x90000000
+#define CFG_NAND2_ADDR 0x94000000
/*-----------------------------------------------------------------------
* Initial RAM & stack pointer (placed in SDRAM)
*----------------------------------------------------------------------*/
-#define CFG_INIT_RAM_ADDR 0xf0000000 /* DCache */
-#define CFG_INIT_RAM_END 0x1000
+#define CFG_INIT_RAM_ADDR 0x70000000 /* DCache */
+#define CFG_INIT_RAM_END (8 << 10)
#define CFG_GBL_DATA_SIZE 256 /* num bytes initial data */
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
@@ -88,7 +97,7 @@
* The DS1558 code assumes this condition
*
*----------------------------------------------------------------------*/
-#define CFG_NVRAM_SIZE (0x2000 - 0x10) /* NVRAM size(8k)- RTC regs */
+#define CFG_NVRAM_SIZE (0x2000 - 0x10) /* NVRAM size(8k)- RTC regs */
#define CONFIG_RTC_DS1556 1 /* DS1556 RTC */
/*-----------------------------------------------------------------------
@@ -118,21 +127,80 @@
#define CFG_FLASH_ADDR1 0x2aa
#define CFG_FLASH_WORD_SIZE unsigned char
-#define CFG_FLASH_2ND_16BIT_DEV 1 /* bamboo has 8 and 16bit device */
-#define CFG_FLASH_2ND_ADDR 0x87800000 /* bamboo has 8 and 16bit device */
+#define CFG_FLASH_2ND_16BIT_DEV 1 /* bamboo has 8 and 16bit device */
+#define CFG_FLASH_2ND_ADDR 0x87800000 /* bamboo has 8 and 16bit device */
#ifdef CFG_ENV_IS_IN_FLASH
#define CFG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */
#define CFG_ENV_ADDR (CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE)
-#define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */
+#define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */
-#if 0 /* test-only */
/* Address and size of Redundant Environment Sector */
#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR-CFG_ENV_SECT_SIZE)
#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
-#endif
#endif /* CFG_ENV_IS_IN_FLASH */
+/*-----------------------------------------------------------------------
+ * NAND-FLASH related
+ *----------------------------------------------------------------------*/
+#define NAND_CMD_REG (0x00) /* NandFlash Command Register */
+#define NAND_ADDR_REG (0x04) /* NandFlash Address Register */
+#define NAND_DATA_REG (0x08) /* NandFlash Data Register */
+#define NAND_ECC0_REG (0x10) /* NandFlash ECC Register0 */
+#define NAND_ECC1_REG (0x14) /* NandFlash ECC Register1 */
+#define NAND_ECC2_REG (0x18) /* NandFlash ECC Register2 */
+#define NAND_ECC3_REG (0x1C) /* NandFlash ECC Register3 */
+#define NAND_ECC4_REG (0x20) /* NandFlash ECC Register4 */
+#define NAND_ECC5_REG (0x24) /* NandFlash ECC Register5 */
+#define NAND_ECC6_REG (0x28) /* NandFlash ECC Register6 */
+#define NAND_ECC7_REG (0x2C) /* NandFlash ECC Register7 */
+#define NAND_CR0_REG (0x30) /* NandFlash Device Bank0 Config Register */
+#define NAND_CR1_REG (0x34) /* NandFlash Device Bank1 Config Register */
+#define NAND_CR2_REG (0x38) /* NandFlash Device Bank2 Config Register */
+#define NAND_CR3_REG (0x3C) /* NandFlash Device Bank3 Config Register */
+#define NAND_CCR_REG (0x40) /* NandFlash Core Configuration Register */
+#define NAND_STAT_REG (0x44) /* NandFlash Device Status Register */
+#define NAND_HWCTL_REG (0x48) /* NandFlash Direct Hwd Control Register */
+#define NAND_REVID_REG (0x50) /* NandFlash Core Revision Id Register */
+
+/* Nand Flash K9F1208U0A Command Set => Nand Flash 0 */
+#define NAND0_CMD_READ1_HALF1 0x00 /* Starting addr for 1rst half of registers */
+#define NAND0_CMD_READ1_HALF2 0x01 /* Starting addr for 2nd half of registers */
+#define NAND0_CMD_READ2 0x50
+#define NAND0_CMD_READ_ID 0x90
+#define NAND0_CMD_READ_STATUS 0x70
+#define NAND0_CMD_RESET 0xFF
+#define NAND0_CMD_PAGE_PROG 0x80
+#define NAND0_CMD_PAGE_PROG_TRUE 0x10
+#define NAND0_CMD_PAGE_PROG_DUMMY 0x11
+#define NAND0_CMD_BLOCK_ERASE 0x60
+#define NAND0_CMD_BLOCK_ERASE_END 0xD0
+
+#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
+#define SECTORSIZE 512
+
+#define ADDR_COLUMN 1
+#define ADDR_PAGE 2
+#define ADDR_COLUMN_PAGE 3
+
+#define NAND_ChipID_UNKNOWN 0x00
+#define NAND_MAX_FLOORS 1
+#define NAND_MAX_CHIPS 1
+
+#define WRITE_NAND_COMMAND(d, adr) do {*(volatile u8 *)((ulong)adr+NAND_CMD_REG) = d;} while(0)
+#define WRITE_NAND_ADDRESS(d, adr) do {*(volatile u8 *)((ulong)adr+NAND_ADDR_REG) = d;} while(0)
+#define WRITE_NAND(d, adr) do {*(volatile u8 *)((ulong)adr+NAND_DATA_REG) = d;} while(0)
+#define READ_NAND(adr) (*(volatile u8 *)((ulong)adr+NAND_DATA_REG))
+#define NAND_WAIT_READY(nand) while (!(*(volatile u8 *)((ulong)nand->IO_ADDR+NAND_STAT_REG) & 0x01))
+
+/* not needed with 440EP NAND controller */
+#define NAND_CTL_CLRALE(nandptr)
+#define NAND_CTL_SETALE(nandptr)
+#define NAND_CTL_CLRCLE(nandptr)
+#define NAND_CTL_SETCLE(nandptr)
+#define NAND_DISABLE_CE(nand)
+#define NAND_ENABLE_CE(nand)
+
/*-----------------------------------------------------------------------
* DDR SDRAM
*----------------------------------------------------------------------------- */
@@ -206,10 +274,14 @@
#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
#define CONFIG_MII 1 /* MII PHY management */
-#define CONFIG_NET_MULTI 1 /* required for netconsole */
#define CONFIG_PHY_ADDR 0 /* PHY address, See schematics */
+
+#ifndef CONFIG_BAMBOO_NAND
+#define CONFIG_NET_MULTI 1 /* required for netconsole */
#define CONFIG_PHY1_ADDR 1
#define CONFIG_HAS_ETH1 1 /* add support for "eth1addr" */
+#endif /* CONFIG_BAMBOO_NAND */
+
#define CONFIG_NO_PHY_RESET 1 /* no PHY reset on bamboo!!! */
#define CFG_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */
@@ -219,17 +291,24 @@
#define CONFIG_DOS_PARTITION
#define CONFIG_ISO_PARTITION
-#ifdef CONFIG_440_EP
+#ifdef CONFIG_440EP
/* USB */
#define CONFIG_USB_OHCI
#define CONFIG_USB_STORAGE
/*Comment this out to enable USB 1.1 device*/
#define USB_2_0_DEVICE
-#endif /*CONFIG_440_EP*/
+#endif /*CONFIG_440EP*/
+
+#ifdef CONFIG_BAMBOO_NAND
+#define _CFG_CMD_NAND CFG_CMD_NAND
+#else
+#define _CFG_CMD_NAND 0
+#endif /* CONFIG_BAMBOO_NAND */
#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
CFG_CMD_ASKENV | \
+ CFG_CMD_EEPROM | \
CFG_CMD_DATE | \
CFG_CMD_DHCP | \
CFG_CMD_DIAG | \
@@ -244,6 +323,7 @@
CFG_CMD_REGINFO | \
CFG_CMD_SDRAM | \
CFG_CMD_USB | \
+ _CFG_CMD_NAND | \
CFG_CMD_SNTP )
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
@@ -253,42 +333,42 @@
* Miscellaneous configurable options
*/
#define CFG_LONGHELP /* undef to save memory */
-#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
-#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
#endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS 16 /* max number of command args */
-#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
-#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
-#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
+#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
+#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
#define CFG_LOAD_ADDR 0x100000 /* default load address */
-#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */
-#define CONFIG_LYNXKDI 1 /* support kdi files */
+#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */
+#define CONFIG_LYNXKDI 1 /* support kdi files */
-#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
/*-----------------------------------------------------------------------
* PCI stuff
*-----------------------------------------------------------------------
*/
/* General PCI */
-#define CONFIG_PCI /* include pci support */
-#undef CONFIG_PCI_PNP /* do (not) pci plug-and-play */
+#define CONFIG_PCI /* include pci support */
+#undef CONFIG_PCI_PNP /* do (not) pci plug-and-play */
#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
-#define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE */
+#define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE*/
/* Board-specific PCI */
#define CFG_PCI_PRE_INIT /* enable board pci_pre_init() */
#define CFG_PCI_TARGET_INIT
#define CFG_PCI_MASTER_INIT
-#define CFG_PCI_SUBSYS_VENDORID 0x1014 /* IBM */
-#define CFG_PCI_SUBSYS_ID 0xcafe /* Whatever */
+#define CFG_PCI_SUBSYS_VENDORID 0x10e8 /* AMCC */
+#define CFG_PCI_SUBSYS_ID 0xcafe /* Whatever */
/*
* For booting Linux, the board info and command line data
@@ -300,7 +380,7 @@
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CFG_DCACHE_SIZE 32768 /* For IBM 440 CPUs */
+#define CFG_DCACHE_SIZE (32<<10) /* For IBM 440 CPUs */
#define CFG_CACHELINE_SIZE 32 /* ... */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
diff --git a/include/configs/bubinga.h b/include/configs/bubinga.h
index c7451959a832f0688fd409910a91cf3754229eff..bc5aaf893411f44efd4665e95025bb72b725d900 100644
--- a/include/configs/bubinga.h
+++ b/include/configs/bubinga.h
@@ -127,6 +127,10 @@
#define CONFIG_MII 1 /* MII PHY management */
#define CONFIG_PHY_ADDR 1 /* PHY address */
+#define CONFIG_HAS_ETH1
+#define CONFIG_PHY1_ADDR 2 /* EMAC1 PHY address */
+#define CONFIG_NET_MULTI 1
+#define CFG_RX_ETH_BUFFER 16 /* Number of ethernet rx buffers & descriptors */
#define CONFIG_RTC_DS174x 1 /* use DS1743 RTC in Bubinga */
@@ -199,8 +203,6 @@
#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
-#define CFG_RX_ETH_BUFFER 16 /* Number of ethernet rx buffers & descriptors */
-
/*-----------------------------------------------------------------------
* I2C stuff
*-----------------------------------------------------------------------
diff --git a/include/configs/hmi1001.h b/include/configs/hmi1001.h
index aec405b160a7cd61ff5db9514ca6bebd44439f6f..7f9fea513bb639a8c5a5bc823b30b0f20a9b8d6c 100644
--- a/include/configs/hmi1001.h
+++ b/include/configs/hmi1001.h
@@ -287,6 +287,8 @@
#define CFG_IDE_MAXBUS 1 /* max. 1 IDE bus */
#define CFG_IDE_MAXDEVICE 2 /* max. 2 drives per IDE bus */
+#define CONFIG_IDE_PREINIT 1
+
#define CFG_ATA_IDE0_OFFSET 0x0000
#define CFG_ATA_BASE_ADDR MPC5XXX_ATA
diff --git a/include/configs/ocotea.h b/include/configs/ocotea.h
index 4f90b1b51d91b27a03528b2fb343d4a1508a3cd8..2b0f6874c3b03da2dd314b8418242c9aeb421336 100644
--- a/include/configs/ocotea.h
+++ b/include/configs/ocotea.h
@@ -40,7 +40,7 @@
* High Level Configuration Options
*----------------------------------------------------------------------*/
#define CONFIG_OCOTEA 1 /* Board is ebony */
-#define CONFIG_440_GX 1 /* Specifc GX support */
+#define CONFIG_440GX 1 /* Specifc GX support */
#define CONFIG_4xx 1 /* ... PPC4xx family */
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */
#undef CFG_DRAM_TEST /* Disable-takes long time! */
diff --git a/include/configs/spieval.h b/include/configs/spieval.h
new file mode 100644
index 0000000000000000000000000000000000000000..0dab9b0f508a86f1adc6c1b5c3ae1a12ade3bf29
--- /dev/null
+++ b/include/configs/spieval.h
@@ -0,0 +1,548 @@
+/*
+ * (C) Copyright 2003-2005
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2004-2005
+ * Martin Krause, TQ-Systems GmbH, martin.krause@tqs.de
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+
+#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */
+#define CONFIG_MPC5200 1 /* (more precisely an MPC5200 CPU) */
+#define CONFIG_TQM5200 1 /* ... on TQM5200 module */
+#undef CONFIG_TQM5200_REV100 /* define for revision 100 modules */
+#define CONFIG_STK52XX 1 /* ... on a STK52XX base board */
+#define CONFIG_STK52XX_REV100 1 /* define for revision 100 baseboards */
+
+#define CFG_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */
+
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+#endif
+
+/*
+ * Serial console configuration
+ */
+#define CONFIG_PSC_CONSOLE 6 /* console is on PSC6 */
+#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */
+#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
+
+#ifdef CONFIG_STK52XX
+#undef CONFIG_PS2KBD /* AT-PS/2 Keyboard */
+#define CONFIG_PS2MULT /* .. on PS/2 Multiplexer */
+#define CONFIG_PS2SERIAL 6 /* .. on PSC6 */
+#define CONFIG_PS2MULT_DELAY (CFG_HZ/2) /* Initial delay */
+#define CONFIG_BOARD_EARLY_INIT_R
+#endif /* CONFIG_STK52XX */
+
+/*
+ * PCI Mapping:
+ * 0x40000000 - 0x4fffffff - PCI Memory
+ * 0x50000000 - 0x50ffffff - PCI IO Space
+ */
+#ifdef CONFIG_STK52XX
+#define CONFIG_PCI 1
+#define CONFIG_PCI_PNP 1
+/* #define CONFIG_PCI_SCAN_SHOW 1 */
+
+#define CONFIG_PCI_MEM_BUS 0x40000000
+#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS
+#define CONFIG_PCI_MEM_SIZE 0x10000000
+
+#define CONFIG_PCI_IO_BUS 0x50000000
+#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS
+#define CONFIG_PCI_IO_SIZE 0x01000000
+
+#define CONFIG_NET_MULTI 1
+#define CONFIG_EEPRO100 1
+#define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
+#define CONFIG_NS8382X 1
+#endif /* CONFIG_STK52XX */
+
+#ifdef CONFIG_PCI
+#define ADD_PCI_CMD CFG_CMD_PCI
+#else
+#define ADD_PCI_CMD 0
+#endif
+
+/*
+ * Video console
+ */
+#if 1
+#define CONFIG_VIDEO
+#define CONFIG_VIDEO_SM501
+#define CONFIG_VIDEO_SM501_32BPP
+#define CONFIG_CFB_CONSOLE
+#define CONFIG_VIDEO_LOGO
+#define CONFIG_VGA_AS_SINGLE_DEVICE
+#define CONFIG_CONSOLE_EXTRA_INFO
+#define CONFIG_VIDEO_SW_CURSOR
+#define CONFIG_SPLASH_SCREEN
+#define CFG_CONSOLE_IS_IN_ENV
+#endif
+
+#ifdef CONFIG_VIDEO
+#define ADD_BMP_CMD CFG_CMD_BMP
+#else
+#define ADD_BMP_CMD 0
+#endif
+
+/* Partitions */
+#define CONFIG_MAC_PARTITION
+#define CONFIG_DOS_PARTITION
+#define CONFIG_ISO_PARTITION
+
+/* USB */
+#ifdef CONFIG_STK52XX
+#define CONFIG_USB_OHCI
+#define ADD_USB_CMD CFG_CMD_USB | CFG_CMD_FAT
+#define CONFIG_USB_STORAGE
+#else
+#define ADD_USB_CMD 0
+#endif
+
+/* POST support */
+#define CONFIG_POST (CFG_POST_MEMORY | \
+ CFG_POST_CPU | \
+ CFG_POST_I2C)
+
+#ifdef CONFIG_POST
+#define CFG_CMD_POST_DIAG CFG_CMD_DIAG
+/* preserve space for the post_word at end of on-chip SRAM */
+#define MPC5XXX_SRAM_POST_SIZE MPC5XXX_SRAM_SIZE-4
+#else
+#define CFG_CMD_POST_DIAG 0
+#endif
+
+/* IDE */
+#if defined (CONFIG_MINIFAP) || defined (CONFIG_STK52XX)
+#define ADD_IDE_CMD (CFG_CMD_IDE | CFG_CMD_FAT | CFG_CMD_EXT2)
+#else
+#define ADD_IDE_CMD 0
+#endif
+
+/*
+ * Supported commands
+ */
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
+ ADD_BMP_CMD | \
+ ADD_IDE_CMD | \
+ ADD_PCI_CMD | \
+ ADD_USB_CMD | \
+ CFG_CMD_ASKENV | \
+ CFG_CMD_DATE | \
+ CFG_CMD_DHCP | \
+ CFG_CMD_ECHO | \
+ CFG_CMD_EEPROM | \
+ CFG_CMD_I2C | \
+ CFG_CMD_MII | \
+ CFG_CMD_NFS | \
+ CFG_CMD_PING | \
+ CFG_CMD_POST_DIAG | \
+ CFG_CMD_REGINFO | \
+ CFG_CMD_SNTP )
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+#define CONFIG_TIMESTAMP /* display image timestamps */
+
+#if (TEXT_BASE == 0xFC000000) /* Boot low */
+# define CFG_LOWBOOT 1
+#endif
+
+/*
+ * Autobooting
+ */
+#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
+
+#define CONFIG_PREBOOT "echo;" \
+ "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
+ "echo"
+
+#undef CONFIG_BOOTARGS
+
+#if defined (CONFIG_TQM5200_AA)
+# define CONFIG_U_BOOT_SUFFIX "-AA\0"
+#elif defined (CONFIG_TQM5200_AB)
+# define CONFIG_U_BOOT_SUFFIX "-AB\0"
+#elif defined (CONFIG_TQM5200_AC)
+# define CONFIG_U_BOOT_SUFFIX "-AC\0"
+#else
+# define CONFIG_U_BOOT_SUFFIX "\0"
+#endif
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "netdev=eth0\0" \
+ "rootpath=/opt/eldk/ppc_6xx\0" \
+ "ramargs=setenv bootargs root=/dev/ram rw\0" \
+ "nfsargs=setenv bootargs root=/dev/nfs rw " \
+ "nfsroot=$(serverip):$(rootpath)\0" \
+ "addip=setenv bootargs $(bootargs) " \
+ "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)" \
+ ":$(hostname):$(netdev):off panic=1\0" \
+ "flash_self=run ramargs addip;" \
+ "bootm $(kernel_addr) $(ramdisk_addr)\0" \
+ "flash_nfs=run nfsargs addip;" \
+ "bootm $(kernel_addr)\0" \
+ "net_nfs=tftp 200000 $(bootfile);run nfsargs addip;bootm\0" \
+ "bootfile=/tftpboot/tqm5200/uImage\0" \
+ "load=tftp 200000 $(u-boot)\0" \
+ "u-boot=/tftpboot/tqm5200/u-boot.bin" CONFIG_U_BOOT_SUFFIX \
+ "update=protect off FC000000 FC05FFFF;" \
+ "erase FC000000 FC05FFFF;" \
+ "cp.b 200000 FC000000 $(filesize);" \
+ "protect on FC000000 FC05FFFF\0" \
+ ""
+
+#define CONFIG_BOOTCOMMAND "run net_nfs"
+
+/*
+ * IPB Bus clocking configuration.
+ */
+#define CFG_IPBSPEED_133 /* define for 133MHz speed */
+
+#if defined(CFG_IPBSPEED_133)
+/*
+ * PCI Bus clocking configuration
+ *
+ * Actually a PCI Clock of 66 MHz is only set (in cpu_init.c) if
+ * CFG_IPBSPEED_133 is defined. This is because a PCI Clock of 66 MHz yet hasn't
+ * been tested with a IPB Bus Clock of 66 MHz.
+ */
+#define CFG_PCISPEED_66 /* define for 66MHz speed */
+#endif
+
+/*
+ * I2C configuration
+ */
+#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
+#ifdef CONFIG_TQM5200_REV100
+#define CFG_I2C_MODULE 1 /* Select I2C module #1 for rev. 100 board */
+#else
+#define CFG_I2C_MODULE 2 /* Select I2C module #2 for all other revs */
+#endif
+
+/*
+ * I2C clock frequency
+ *
+ * Please notice, that the resulting clock frequency could differ from the
+ * configured value. This is because the I2C clock is derived from system
+ * clock over a frequency divider with only a few divider values. U-boot
+ * calculates the best approximation for CFG_I2C_SPEED. However the calculated
+ * approximation allways lies below the configured value, never above.
+ */
+#define CFG_I2C_SPEED 100000 /* 100 kHz */
+#define CFG_I2C_SLAVE 0x7F
+
+/*
+ * EEPROM configuration for onboard EEPROM M24C32 (M24C64 should work
+ * also). For other EEPROMs configuration should be verified. On Mini-FAP the
+ * EEPROM (24C64) is on the same I2C address (but on other I2C bus), so the
+ * same configuration could be used.
+ */
+#define CFG_I2C_EEPROM_ADDR 0x50 /* 1010000x */
+#define CFG_I2C_EEPROM_ADDR_LEN 2
+#define CFG_EEPROM_PAGE_WRITE_BITS 5 /* =32 Bytes per write */
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 20
+
+/*
+ * HW-Monitor configuration on Mini-FAP
+ */
+#if defined (CONFIG_MINIFAP)
+#define CFG_I2C_HWMON_ADDR 0x2C
+#endif
+
+/* List of I2C addresses to be verified by POST */
+#if defined (CONFIG_TQM5200_AA) || defined (CONFIG_TQM5200_AB)
+#define I2C_ADDR_LIST { CFG_I2C_EEPROM_ADDR, \
+ CFG_I2C_SLAVE }
+#elif defined (CONFIG_TQM5200_AC)
+#define I2C_ADDR_LIST { CFG_I2C_SLAVE }
+#endif
+
+#if defined (CONFIG_MINIFAP)
+#undef I2C_ADDR_LIST
+#define I2C_ADDR_LIST { CFG_I2C_EEPROM_ADDR, \
+ CFG_I2C_HWMON_ADDR, \
+ CFG_I2C_SLAVE }
+#endif
+
+/*
+ * Flash configuration
+ */
+#define CFG_FLASH_BASE TEXT_BASE /* 0xFC000000 */
+
+/* use CFI flash driver if no module variant is spezified */
+#define CFG_FLASH_CFI 1 /* Flash is CFI conformant */
+#define CFG_FLASH_CFI_DRIVER 1 /* Use the common driver */
+#define CFG_FLASH_BANKS_LIST { CFG_BOOTCS_START }
+#define CFG_FLASH_EMPTY_INFO
+#define CFG_FLASH_SIZE 0x04000000 /* 64 MByte */
+#define CFG_MAX_FLASH_SECT 512 /* max num of sects on one chip */
+#undef CFG_FLASH_USE_BUFFER_WRITE /* not supported yet for AMD */
+
+#if !defined(CFG_LOWBOOT)
+#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x00760000 + 0x00800000)
+#else /* CFG_LOWBOOT */
+#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x00060000)
+#endif /* CFG_LOWBOOT */
+#define CFG_MAX_FLASH_BANKS 1 /* max num of flash banks
+ (= chip selects) */
+#define CFG_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms) */
+#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */
+
+
+/*
+ * Environment settings
+ */
+#define CFG_ENV_IS_IN_FLASH 1
+#define CFG_ENV_SIZE 0x10000
+#define CFG_ENV_SECT_SIZE 0x20000
+#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR + CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
+
+/*
+ * Memory map
+ */
+#define CFG_MBAR 0xF0000000
+#define CFG_SDRAM_BASE 0x00000000
+#define CFG_DEFAULT_MBAR 0x80000000
+
+/* Use ON-Chip SRAM until RAM will be available */
+#define CFG_INIT_RAM_ADDR MPC5XXX_SRAM
+#ifdef CONFIG_POST
+/* preserve space for the post_word at end of on-chip SRAM */
+#define CFG_INIT_RAM_END MPC5XXX_SRAM_POST_SIZE
+#else
+#define CFG_INIT_RAM_END MPC5XXX_SRAM_SIZE
+#endif
+
+
+#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+
+#define CFG_MONITOR_BASE TEXT_BASE
+#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
+# define CFG_RAMBOOT 1
+#endif
+
+#define CFG_MONITOR_LEN (384 << 10) /* Reserve 384 kB for Monitor */
+#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+
+/*
+ * Ethernet configuration
+ */
+#define CONFIG_MPC5xxx_FEC 1
+/*
+ * Define CONFIG_FEC_10MBIT to force FEC at 10Mb
+ */
+/* #define CONFIG_FEC_10MBIT 1 */
+#define CONFIG_PHY_ADDR 0x00
+
+/*
+ * GPIO configuration
+ *
+ * use pin gpio_wkup_6 as second SDRAM chip select (mem_cs1):
+ * Bit 0 (mask: 0x80000000): 1
+ * use ALT CAN position: Bits 2-3 (mask: 0x30000000):
+ * 00 -> No Alternatives, CAN1/2 on PSC2 according to PSC2 setting.
+ * 01 -> CAN1 on I2C1, CAN2 on Tmr0/1.
+ * Use for REV200 STK52XX boards. Do not use with REV100 modules
+ * (because, there I2C1 is used as I2C bus)
+ * use PSC1 as UART: Bits 28-31 (mask: 0x00000007): 0100
+ * use PSC2 as CAN: Bits 25:27 (mask: 0x00000030)
+ * 000 -> All PSC2 pins are GIOPs
+ * 001 -> CAN1/2 on PSC2 pins
+ * Use for REV100 STK52xx boards
+ * use PSC6:
+ * on STK52xx:
+ * use as UART. Pins PSC6_0 to PSC6_3 are used.
+ * Bits 9:11 (mask: 0x00700000):
+ * 101 -> PSC6 : Extended POST test is not available
+ * on MINI-FAP and TQM5200_IB:
+ * use PSC6_0 to PSC6_3 as GPIO: Bits 9:11 (mask: 0x00700000):
+ * 000 -> PSC6 could not be used as UART, CODEC or IrDA
+ * GPIO on PSC6_3 is used in post_hotkeys_pressed() to enable extended POST
+ * tests.
+ */
+#if defined (CONFIG_MINIFAP)
+# define CFG_GPS_PORT_CONFIG 0x91000004
+#elif defined (CONFIG_STK52XX)
+# if defined (CONFIG_STK52XX_REV100)
+# define CFG_GPS_PORT_CONFIG 0x81500014
+# else /* STK52xx REV200 and above */
+# if defined (CONFIG_TQM5200_REV100)
+# error TQM5200 REV100 not supported on STK52XX REV200 or above
+# else/* TQM5200 REV200 and above */
+# define CFG_GPS_PORT_CONFIG 0x91500004
+# endif
+# endif
+#else /* TMQ5200 Inbetriebnahme-Board */
+# define CFG_GPS_PORT_CONFIG 0x81000004
+#endif
+
+/*
+ * RTC configuration
+ */
+#define CONFIG_RTC_MPC5200 1 /* use internal MPC5200 RTC */
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+/* Enable an alternate, more extensive memory test */
+#define CFG_ALT_MEMTEST
+
+#define CFG_MEMTEST_START 0x00100000 /* memtest works on */
+#define CFG_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */
+
+#define CFG_LOAD_ADDR 0x100000 /* default load address */
+
+#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+
+/*
+ * Enable loopw commando. This has only affect, if CFG_CMD_MEM is defined,
+ * which is normally part of the default commands (CFV_CMD_DFL)
+ */
+#define CONFIG_LOOPW
+
+/*
+ * Various low-level settings
+ */
+#if defined(CONFIG_MPC5200)
+#define CFG_HID0_INIT HID0_ICE | HID0_ICFI
+#define CFG_HID0_FINAL HID0_ICE
+#else
+#define CFG_HID0_INIT 0
+#define CFG_HID0_FINAL 0
+#endif
+
+#define CFG_BOOTCS_START CFG_FLASH_BASE
+#define CFG_BOOTCS_SIZE CFG_FLASH_SIZE
+#ifdef CFG_PCISPEED_66
+#define CFG_BOOTCS_CFG 0x0008DF30 /* for pci_clk = 66 MHz */
+#else
+#define CFG_BOOTCS_CFG 0x0004DF30 /* for pci_clk = 33 MHz */
+#endif
+#define CFG_CS0_START CFG_FLASH_BASE
+#define CFG_CS0_SIZE CFG_FLASH_SIZE
+
+/* automatic configuration of chip selects */
+#ifdef CONFIG_CS_AUTOCONF
+#define CONFIG_LAST_STAGE_INIT
+#endif
+
+/*
+ * SRAM - Do not map below 2 GB in address space, because this area is used
+ * for SDRAM autosizing.
+ */
+#if defined CONFIG_TQM5200_AB || defined (CONFIG_CS_AUTOCONF)
+#define CFG_CS2_START 0xE5000000
+#ifdef CONFIG_TQM5200_AB
+#define CFG_CS2_SIZE 0x80000 /* 512 kByte */
+#else /* CONFIG_CS_AUTOCONF */
+#define CFG_CS2_SIZE 0x100000 /* 1 MByte */
+#endif
+#define CFG_CS2_CFG 0x0004D930
+#endif
+
+/*
+ * Grafic controller - Do not map below 2 GB in address space, because this
+ * area is used for SDRAM autosizing.
+ */
+#if defined (CONFIG_TQM5200_AB) || defined (CONFIG_TQM5200_AC) || \
+ defined (CONFIG_CS_AUTOCONF)
+#define SM501_FB_BASE 0xE0000000
+#define CFG_CS1_START (SM501_FB_BASE)
+#define CFG_CS1_SIZE 0x4000000 /* 64 MByte */
+#define CFG_CS1_CFG 0x8F48FF70
+#define SM501_MMIO_BASE CFG_CS1_START + 0x03E00000
+#endif
+
+#define CFG_CS_BURST 0x00000000
+#define CFG_CS_DEADCYCLE 0x33333311 /* 1 dead cycle for flash and SM501 */
+
+#define CFG_RESET_ADDRESS 0xff000000
+
+/*-----------------------------------------------------------------------
+ * USB stuff
+ *-----------------------------------------------------------------------
+ */
+#define CONFIG_USB_CLOCK 0x0001BBBB
+#define CONFIG_USB_CONFIG 0x00001000
+
+/*-----------------------------------------------------------------------
+ * IDE/ATA stuff Supports IDE harddisk
+ *-----------------------------------------------------------------------
+ */
+
+#undef CONFIG_IDE_8xx_PCCARD /* Use IDE with PC Card Adapter */
+
+#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */
+#undef CONFIG_IDE_LED /* LED for ide not supported */
+
+#define CONFIG_IDE_RESET /* reset for ide supported */
+#define CONFIG_IDE_PREINIT
+
+#define CFG_IDE_MAXBUS 1 /* max. 1 IDE bus */
+#define CFG_IDE_MAXDEVICE 2 /* max. 2 drives per IDE bus */
+
+#define CFG_ATA_IDE0_OFFSET 0x0000
+
+#define CFG_ATA_BASE_ADDR MPC5XXX_ATA
+
+/* Offset for data I/O */
+#define CFG_ATA_DATA_OFFSET (0x0060)
+
+/* Offset for normal register accesses */
+#define CFG_ATA_REG_OFFSET (CFG_ATA_DATA_OFFSET)
+
+/* Offset for alternate registers */
+#define CFG_ATA_ALT_OFFSET (0x005C)
+
+/* Interval between registers */
+#define CFG_ATA_STRIDE 4
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/yellowstone.h b/include/configs/yellowstone.h
index d83d8e7b43a20e995571f16024c9e7c1a394db11..2b863371433e554ac6269029b6c32d1ca37feb45 100644
--- a/include/configs/yellowstone.h
+++ b/include/configs/yellowstone.h
@@ -29,7 +29,7 @@
* High Level Configuration Options
*----------------------------------------------------------------------*/
#define CONFIG_YELLOWSTONE 1 /* Board is BAMBOO */
-#define CONFIG_440_GR 1 /* Specific PPC440GR support */
+#define CONFIG_440GR 1 /* Specific PPC440GR support */
#define CONFIG_4xx 1 /* ... PPC4xx family */
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
@@ -161,14 +161,14 @@
#define CONFIG_DOS_PARTITION
#define CONFIG_ISO_PARTITION
-#ifdef CONFIG_440_EP
+#ifdef CONFIG_440EP
/* USB */
#define CONFIG_USB_OHCI
#define CONFIG_USB_STORAGE
/*Comment this out to enable USB 1.1 device*/
#define USB_2_0_DEVICE
-#endif /*CONFIG_440_EP*/
+#endif /*CONFIG_440EP*/
#ifdef DEBUG
#define CONFIG_PANIC_HANG
@@ -176,7 +176,7 @@
#define CONFIG_HW_WATCHDOG /* watchdog */
#endif
-#ifdef CONFIG_440_EP
+#ifdef CONFIG_440EP
/* Need to define POST */
#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | \
CFG_CMD_DATE | \
diff --git a/include/configs/yosemite.h b/include/configs/yosemite.h
index 18d6623280d14e837f065e78d7d0f20ea2d835dd..4ac930b42aa1764db90c0bcd582b1ba6799fc993 100644
--- a/include/configs/yosemite.h
+++ b/include/configs/yosemite.h
@@ -1,4 +1,6 @@
/*
+ * (C) Copyright 2005
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -28,56 +30,53 @@
/*-----------------------------------------------------------------------
* High Level Configuration Options
*----------------------------------------------------------------------*/
-#define CONFIG_YOSEMITE 1 /* Board is BAMBOO */
-#define CONFIG_440_EP 1 /* Specific PPC440EP support */
-
-#define CONFIG_4xx 1 /* ... PPC4xx family */
-#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
-#undef CFG_DRAM_TEST /* disable - takes long time! */
+#define CONFIG_YOSEMITE 1 /* Board is Yosemite */
+#define CONFIG_440EP 1 /* Specific PPC440EP support */
+#define CONFIG_4xx 1 /* ... PPC4xx family */
#define CONFIG_SYS_CLK_FREQ 66666666 /* external freq to pll */
+#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
+#define CONFIG_MISC_INIT_R 1 /* call misc_init_r() */
+
/*-----------------------------------------------------------------------
* Base addresses -- Note these are effective addresses where the
* actual resources get mapped (not physical addresses)
*----------------------------------------------------------------------*/
-#define CFG_SDRAM_BASE 0x00000000 /* _must_ be 0 */
-#define CFG_FLASH_BASE 0xfe000000 /* start of FLASH */
-#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */
-#define CFG_PCI_MEMBASE 0xa0000000 /* mapped pci memory */
-#define CFG_PCI_MEMBASE1 CFG_PCI_MEMBASE + 0x10000000
-#define CFG_PCI_MEMBASE2 CFG_PCI_MEMBASE1 + 0x10000000
-#define CFG_PCI_MEMBASE3 CFG_PCI_MEMBASE2 + 0x10000000
-
+#define CFG_MONITOR_LEN (512 * 1024) /* Reserve 512 kB for Monitor */
+#define CFG_MALLOC_LEN (256 * 1024) /* Reserve 256 kB for malloc() */
+#define CFG_MONITOR_BASE (-CFG_MONITOR_LEN)
+#define CFG_SDRAM_BASE 0x00000000 /* _must_ be 0 */
+#define CFG_FLASH_BASE 0xfc000000 /* start of FLASH */
+#define CFG_PCI_MEMBASE 0xa0000000 /* mapped pci memory*/
+#define CFG_PCI_MEMBASE1 CFG_PCI_MEMBASE + 0x10000000
+#define CFG_PCI_MEMBASE2 CFG_PCI_MEMBASE1 + 0x10000000
+#define CFG_PCI_MEMBASE3 CFG_PCI_MEMBASE2 + 0x10000000
/*Don't change either of these*/
-#define CFG_PERIPHERAL_BASE 0xef600000 /* internal peripherals */
-#define CFG_PCI_BASE 0xe0000000 /* internal PCI regs */
+#define CFG_PERIPHERAL_BASE 0xef600000 /* internal peripherals*/
+#define CFG_PCI_BASE 0xe0000000 /* internal PCI regs*/
/*Don't change either of these*/
-#define CFG_USB_DEVICE 0x50000000
-#define CFG_NVRAM_BASE_ADDR 0x80000000
-#define CFG_BCSR_BASE (CFG_NVRAM_BASE_ADDR | 0x2000)
+#define CFG_USB_DEVICE 0x50000000
+#define CFG_NVRAM_BASE_ADDR 0x80000000
+#define CFG_BCSR_BASE (CFG_NVRAM_BASE_ADDR | 0x2000)
+#define CFG_BOOT_BASE_ADDR 0xf0000000
/*-----------------------------------------------------------------------
* Initial RAM & stack pointer (placed in SDRAM)
*----------------------------------------------------------------------*/
-#define CFG_INIT_RAM_ADDR 0xf0000000 /* DCache */
-#define CFG_INIT_RAM_END 0x2000
-#define CFG_GBL_DATA_SIZE 256 /* num bytes initial data */
+#define CFG_INIT_RAM_ADDR 0x70000000 /* DCache */
+#define CFG_INIT_RAM_END (8 << 10)
+#define CFG_GBL_DATA_SIZE 256 /* num bytes initial data*/
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
-#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
-#define CFG_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc*/
-#define CFG_KBYTES_SDRAM ( 128 * 1024) /* 128MB */
-#define CFG_SDRAM_BANKS (2)
/*-----------------------------------------------------------------------
* Serial Port
*----------------------------------------------------------------------*/
-#undef CONFIG_SERIAL_SOFTWARE_FIFO
#define CFG_EXT_SERIAL_CLOCK 11059200 /* use external 11.059MHz clk */
-#define CONFIG_BAUDRATE 9600
-#define CONFIG_SERIAL_MULTI 1
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_SERIAL_MULTI 1
/*define this if you want console on UART1*/
#undef CONFIG_UART1_CONSOLE
@@ -85,26 +84,21 @@
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
/*-----------------------------------------------------------------------
- * NVRAM/RTC
- *
- * NOTE: The RTC registers are located at 0x7FFF0 - 0x7FFFF
- * The DS1558 code assumes this condition
- *
+ * Environment
*----------------------------------------------------------------------*/
-#define CFG_NVRAM_SIZE (0x2000 - 0x10) /* NVRAM size(8k)- RTC regs */
-#define CONFIG_RTC_DS1556 1 /* DS1556 RTC */
+/*
+ * Define here the location of the environment variables (FLASH or EEPROM).
+ * Note: DENX encourages to use redundant environment in FLASH.
+ */
+#if 1
+#define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */
+#else
+#define CFG_ENV_IS_IN_EEPROM 1 /* use EEPROM for environment vars */
+#endif
/*-----------------------------------------------------------------------
* FLASH related
*----------------------------------------------------------------------*/
-#if 1 /* test-only */
-#define CFG_MAX_FLASH_BANKS 1 /* number of banks */
-#define CFG_MAX_FLASH_SECT 256 /* sectors per device */
-
-#undef CFG_FLASH_CHECKSUM
-#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
-#define CFG_FLASH_WRITE_TOUT 120000 /* Timeout for Flash Write (in ms) */
-#else
#define CFG_FLASH_CFI /* The flash is CFI compatible */
#define CFG_FLASH_CFI_DRIVER /* Use common CFI driver */
#define CFG_FLASH_CFI_AMD_RESET 1 /* AMD RESET for STM 29W320DB! */
@@ -116,12 +110,24 @@
#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
-#endif
+
+#ifdef CFG_ENV_IS_IN_FLASH
+#define CFG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */
+#define CFG_ENV_ADDR (CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */
+
+/* Address and size of Redundant Environment Sector */
+#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR-CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
+#endif /* CFG_ENV_IS_IN_FLASH */
/*-----------------------------------------------------------------------
* DDR SDRAM
*----------------------------------------------------------------------*/
#undef CONFIG_SPD_EEPROM /* Don't use SPD EEPROM for setup */
+#define CFG_KBYTES_SDRAM (128 * 1024) /* 128MB */
+#define CFG_SDRAM_BANKS (2)
+
/*-----------------------------------------------------------------------
* I2C
@@ -131,58 +137,84 @@
#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
#define CFG_I2C_SLAVE 0x7F
-
-/*-----------------------------------------------------------------------
- * Environment
- *----------------------------------------------------------------------*/
-#undef CFG_ENV_IS_IN_NVRAM /*No NVRAM on board*/
-#undef CFG_ENV_IS_IN_FLASH /* ... not in flash */
-#define CFG_ENV_IS_IN_EEPROM 1
-
-/* Define to allow the user to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
#define CFG_I2C_MULTI_EEPROMS
-#define CFG_ENV_SIZE 0x200 /* Size of Environment vars */
-#define CFG_ENV_OFFSET 0x0
#define CFG_I2C_EEPROM_ADDR (0xa8>>1)
#define CFG_I2C_EEPROM_ADDR_LEN 1
#define CFG_EEPROM_PAGE_WRITE_ENABLE
#define CFG_EEPROM_PAGE_WRITE_BITS 3
#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
-#define CONFIG_BOOTCOMMAND "bootm 0xfe000000" /* autoboot command */
-#define CONFIG_BOOTDELAY 3 /* disable autoboot */
+#ifdef CFG_ENV_IS_IN_EEPROM
+#define CFG_ENV_SIZE 0x200 /* Size of Environment vars */
+#define CFG_ENV_OFFSET 0x0
+#endif /* CFG_ENV_IS_IN_EEPROM */
+
+#define CONFIG_PREBOOT "echo;" \
+ "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
+ "echo"
+
+#undef CONFIG_BOOTARGS
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "netdev=eth0\0" \
+ "hostname=yosemite\0" \
+ "nfsargs=setenv bootargs root=/dev/nfs rw " \
+ "nfsroot=$(serverip):$(rootpath)\0" \
+ "ramargs=setenv bootargs root=/dev/ram rw\0" \
+ "addip=setenv bootargs $(bootargs) " \
+ "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)" \
+ ":$(hostname):$(netdev):off panic=1\0" \
+ "addtty=setenv bootargs $(bootargs) console=ttyS0,$(baudrate)\0"\
+ "flash_nfs=run nfsargs addip addtty;" \
+ "bootm $(kernel_addr)\0" \
+ "flash_self=run ramargs addip addtty;" \
+ "bootm $(kernel_addr) $(ramdisk_addr)\0" \
+ "net_nfs=tftp 200000 $(bootfile);run nfsargs addip addtty;" \
+ "bootm\0" \
+ "rootpath=/opt/eldk/ppc_4xx\0" \
+ "bootfile=/tftpboot/yosemite/uImage\0" \
+ "kernel_addr=fc000000\0" \
+ "ramdisk_addr=fc100000\0" \
+ "load=tftp 100000 /tftpboot/yosemite/u-boot.bin\0" \
+ "update=protect off fff80000 ffffffff;era fff80000 ffffffff;" \
+ "cp.b 100000 fff80000 80000;" \
+ "setenv filesize;saveenv\0" \
+ "upd=run load;run update\0" \
+ ""
+#define CONFIG_BOOTCOMMAND "run flash_self"
+
+#if 0
+#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
+#else
+#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
+#endif
+
+#define CONFIG_BAUDRATE 115200
-#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
+#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
-#define CONFIG_MII 1 /* MII PHY management */
-#define CONFIG_NET_MULTI 1 /* required for netconsole */
-#define CONFIG_PHY1_ADDR 3
+#define CONFIG_MII 1 /* MII PHY management */
+#define CONFIG_NET_MULTI 1 /* required for netconsole */
+#define CONFIG_PHY1_ADDR 3
#define CONFIG_HAS_ETH1 1 /* add support for "eth1addr" */
#define CONFIG_PHY_ADDR 1 /* PHY address, See schematics */
-#define CONFIG_NETMASK 255.255.255.0
-#define CONFIG_IPADDR 10.0.4.251
-#define CONFIG_ETHADDR 00:10:EC:00:12:34
-#define CONFIG_ETH1ADDR 00:10:EC:00:12:35
#define CFG_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */
-#define CONFIG_SERVERIP 10.0.4.115
/* Partitions */
#define CONFIG_MAC_PARTITION
#define CONFIG_DOS_PARTITION
#define CONFIG_ISO_PARTITION
-#ifdef CONFIG_440_EP
+#ifdef CONFIG_440EP
/* USB */
#define CONFIG_USB_OHCI
#define CONFIG_USB_STORAGE
/*Comment this out to enable USB 1.1 device*/
#define USB_2_0_DEVICE
-#endif /*CONFIG_440_EP*/
+#endif /*CONFIG_440EP*/
#ifdef DEBUG
#define CONFIG_PANIC_HANG
@@ -190,53 +222,21 @@
#define CONFIG_HW_WATCHDOG /* watchdog */
#endif
-#ifdef CONFIG_440_EP
- /* Need to define POST */
-#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | \
- CFG_CMD_DATE | \
- CFG_CMD_DHCP | \
- CFG_CMD_DIAG | \
- CFG_CMD_ECHO | \
- CFG_CMD_EEPROM | \
- CFG_CMD_ELF | \
- /* CFG_CMD_EXT2 |*/ \
- /* CFG_CMD_FAT |*/ \
- CFG_CMD_I2C | \
- /* CFG_CMD_IDE |*/ \
- CFG_CMD_IRQ | \
- /* CFG_CMD_KGDB |*/ \
- CFG_CMD_MII | \
- CFG_CMD_PCI | \
- CFG_CMD_PING | \
- CFG_CMD_REGINFO | \
- CFG_CMD_SDRAM | \
- CFG_CMD_FLASH | \
- /* CFG_CMD_SPI |*/ \
- CFG_CMD_USB | \
- 0 ) & ~CFG_CMD_IMLS)
-#else
-#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | \
- CFG_CMD_DATE | \
- CFG_CMD_DHCP | \
- CFG_CMD_DIAG | \
- CFG_CMD_ECHO | \
- CFG_CMD_EEPROM | \
- CFG_CMD_ELF | \
- /* CFG_CMD_EXT2 |*/ \
- /* CFG_CMD_FAT |*/ \
- CFG_CMD_I2C | \
- /* CFG_CMD_IDE |*/ \
- CFG_CMD_IRQ | \
- /* CFG_CMD_KGDB |*/ \
- CFG_CMD_MII | \
- CFG_CMD_PCI | \
- CFG_CMD_PING | \
- CFG_CMD_REGINFO | \
- CFG_CMD_SDRAM | \
- CFG_CMD_FLASH | \
- /* CFG_CMD_SPI |*/ \
- 0 ) & ~CFG_CMD_IMLS)
-#endif
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
+ CFG_CMD_ASKENV | \
+ CFG_CMD_DHCP | \
+ CFG_CMD_DIAG | \
+ CFG_CMD_ELF | \
+ CFG_CMD_I2C | \
+ CFG_CMD_IRQ | \
+ CFG_CMD_MII | \
+ CFG_CMD_NET | \
+ CFG_CMD_NFS | \
+ CFG_CMD_PCI | \
+ CFG_CMD_PING | \
+ CFG_CMD_REGINFO | \
+ CFG_CMD_SDRAM | \
+ CFG_CMD_USB )
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
@@ -245,42 +245,42 @@
* Miscellaneous configurable options
*/
#define CFG_LONGHELP /* undef to save memory */
-#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
-#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
#endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS 16 /* max number of command args */
-#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
-#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
-#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
+#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
+#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
#define CFG_LOAD_ADDR 0x100000 /* default load address */
-#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */
-#define CONFIG_LYNXKDI 1 /* support kdi files */
+#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */
+#define CONFIG_LYNXKDI 1 /* support kdi files */
-#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
/*-----------------------------------------------------------------------
* PCI stuff
*-----------------------------------------------------------------------
*/
/* General PCI */
-#define CONFIG_PCI /* include pci support */
-#undef CONFIG_PCI_PNP /* do (not) pci plug-and-play */
-#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
-#define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE */
+#define CONFIG_PCI /* include pci support */
+#undef CONFIG_PCI_PNP /* do (not) pci plug-and-play */
+#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
+#define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE*/
/* Board-specific PCI */
-#define CFG_PCI_PRE_INIT /* enable board pci_pre_init() */
+#define CFG_PCI_PRE_INIT /* enable board pci_pre_init() */
#define CFG_PCI_TARGET_INIT
#define CFG_PCI_MASTER_INIT
-#define CFG_PCI_SUBSYS_VENDORID 0x1014 /* IBM */
-#define CFG_PCI_SUBSYS_ID 0xcafe /* Whatever */
+#define CFG_PCI_SUBSYS_VENDORID 0x10e8 /* AMCC */
+#define CFG_PCI_SUBSYS_ID 0xcafe /* Whatever */
/*
* For booting Linux, the board info and command line data
@@ -288,10 +288,11 @@
* the maximum mapped by the Linux kernel during initialization.
*/
#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CFG_DCACHE_SIZE 8192 /* For IBM 405 CPUs */
+#define CFG_DCACHE_SIZE (32<<10) /* For IBM 440 CPUs */
#define CFG_CACHELINE_SIZE 32 /* ... */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
@@ -309,4 +310,5 @@
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
+
#endif /* __CONFIG_H */
diff --git a/include/linux/list.h b/include/linux/list.h
index d2a7d43be1d93aa1da249b6a7edc1899cf258ebc..e6492f7a571144b4a095ff8af368118f31fec0cc 100644
--- a/include/linux/list.h
+++ b/include/linux/list.h
@@ -30,7 +30,7 @@ struct list_head {
} while (0)
/*
- * Insert a new entry between two known consecutive entries.
+ * Insert a new entry between two known consecutive entries.
*
* This is only for internal list manipulation where we know
* the prev/next entries already!
@@ -103,7 +103,7 @@ static inline void list_del(struct list_head *entry)
static inline void list_del_init(struct list_head *entry)
{
__list_del(entry->prev, entry->next);
- INIT_LIST_HEAD(entry);
+ INIT_LIST_HEAD(entry);
}
/**
@@ -113,8 +113,8 @@ static inline void list_del_init(struct list_head *entry)
*/
static inline void list_move(struct list_head *list, struct list_head *head)
{
- __list_del(list->prev, list->next);
- list_add(list, head);
+ __list_del(list->prev, list->next);
+ list_add(list, head);
}
/**
@@ -125,8 +125,8 @@ static inline void list_move(struct list_head *list, struct list_head *head)
static inline void list_move_tail(struct list_head *list,
struct list_head *head)
{
- __list_del(list->prev, list->next);
- list_add_tail(list, head);
+ __list_del(list->prev, list->next);
+ list_add_tail(list, head);
}
/**
@@ -195,7 +195,7 @@ static inline void list_splice_init(struct list_head *list,
*/
#define list_for_each(pos, head) \
for (pos = (head)->next, prefetch(pos->next); pos != (head); \
- pos = pos->next, prefetch(pos->next))
+ pos = pos->next, prefetch(pos->next))
/**
* list_for_each_prev - iterate over a list backwards
* @pos: the &struct list_head to use as a loop counter.
@@ -203,8 +203,8 @@ static inline void list_splice_init(struct list_head *list,
*/
#define list_for_each_prev(pos, head) \
for (pos = (head)->prev, prefetch(pos->prev); pos != (head); \
- pos = pos->prev, prefetch(pos->prev))
-
+ pos = pos->prev, prefetch(pos->prev))
+
/**
* list_for_each_safe - iterate over a list safe against removal of list entry
* @pos: the &struct list_head to use as a loop counter.
@@ -224,7 +224,7 @@ static inline void list_splice_init(struct list_head *list,
#define list_for_each_entry(pos, head, member) \
for (pos = list_entry((head)->next, typeof(*pos), member), \
prefetch(pos->member.next); \
- &pos->member != (head); \
+ &pos->member != (head); \
pos = list_entry(pos->member.next, typeof(*pos), member), \
prefetch(pos->member.next))
@@ -237,16 +237,16 @@ static inline void list_splice_init(struct list_head *list,
*/
#define list_for_each_entry_safe(pos, n, head, member) \
for (pos = list_entry((head)->next, typeof(*pos), member), \
- n = list_entry(pos->member.next, typeof(*pos), member); \
- &pos->member != (head); \
+ n = list_entry(pos->member.next, typeof(*pos), member); \
+ &pos->member != (head); \
pos = n, n = list_entry(n->member.next, typeof(*n), member))
/**
- * list_for_each_entry_continue - iterate over list of given type
- * continuing after existing point
- * @pos: the type * to use as a loop counter.
- * @head: the head for your list.
- * @member: the name of the list_struct within the struct.
+ * list_for_each_entry_continue - iterate over list of given type
+ * continuing after existing point
+ * @pos: the type * to use as a loop counter.
+ * @head: the head for your list.
+ * @member: the name of the list_struct within the struct.
*/
#define list_for_each_entry_continue(pos, head, member) \
for (pos = list_entry(pos->member.next, typeof(*pos), member), \
diff --git a/include/ppc440.h b/include/ppc440.h
index 874fe34334e71237b57ca4015999febafb377ed3..02f0a2ed3175d652cf9cc9e5e55fe66d2180c564 100644
--- a/include/ppc440.h
+++ b/include/ppc440.h
@@ -78,7 +78,7 @@
#define ivor13 0x19d /* interrupt vector offset register 13 */
#define ivor14 0x19e /* interrupt vector offset register 14 */
#define ivor15 0x19f /* interrupt vector offset register 15 */
-#if defined(CONFIG_440_GX) || defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
+#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || defined(CONFIG_440GR)
#define mcsrr0 0x23a /* machine check save/restore register 0 */
#define mcsrr1 0x23b /* mahcine check save/restore register 1 */
#define mcsr 0x23c /* machine check status register */
@@ -241,7 +241,7 @@
#define xbcfg 0x23 /* external bus configuration reg */
#define xbcid 0x23 /* external bus core id reg */
-#if defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
+#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
/* PLB4 to PLB3 Bridge OUT */
#define P4P3_DCR_BASE 0x020
@@ -504,7 +504,7 @@
/*-----------------------------------------------------------------------------
| L2 Cache
+----------------------------------------------------------------------------*/
-#if defined (CONFIG_440_GX)
+#if defined (CONFIG_440GX)
#define L2_CACHE_BASE 0x030
#define l2_cache_cfg (L2_CACHE_BASE+0x00) /* L2 Cache Config */
#define l2_cache_cmd (L2_CACHE_BASE+0x01) /* L2 Cache Command */
@@ -515,8 +515,8 @@
#define l2_cache_snp0 (L2_CACHE_BASE+0x06) /* L2 Cache Snoop reg 0 */
#define l2_cache_snp1 (L2_CACHE_BASE+0x07) /* L2 Cache Snoop reg 1 */
-#endif /* CONFIG_440_GX */
-#endif /* !CONFIG_440_EP !CONFIG_440_GR*/
+#endif /* CONFIG_440GX */
+#endif /* !CONFIG_440EP !CONFIG_440GR*/
/*-----------------------------------------------------------------------------
| On-Chip Buses
@@ -527,7 +527,7 @@
| Clocking, Power Management and Chip Control
+----------------------------------------------------------------------------*/
#define CNTRL_DCR_BASE 0x0b0
-#if defined (CONFIG_440_GX)
+#if defined (CONFIG_440GX)
#define cpc0_er (CNTRL_DCR_BASE+0x00) /* CPM enable register */
#define cpc0_fr (CNTRL_DCR_BASE+0x01) /* CPM force register */
#define cpc0_sr (CNTRL_DCR_BASE+0x02) /* CPM status register */
@@ -573,7 +573,7 @@
#define uic1vr (UIC1_DCR_BASE+0x7) /* UIC1 vector */
#define uic1vcr (UIC1_DCR_BASE+0x8) /* UIC1 vector configuration */
-#if defined(CONFIG_440_GX)
+#if defined(CONFIG_440GX)
#define UIC2_DCR_BASE 0x210
#define uic2sr (UIC2_DCR_BASE+0x0) /* UIC2 status */
#define uic2er (UIC2_DCR_BASE+0x2) /* UIC2 enable */
@@ -594,7 +594,7 @@
#define uicb0msr (UIC_DCR_BASE+0x6) /* UIC Base masked status */
#define uicb0vr (UIC_DCR_BASE+0x7) /* UIC Base vector */
#define uicb0vcr (UIC_DCR_BASE+0x8) /* UIC Base vector configuration */
-#endif /* CONFIG_440_GX */
+#endif /* CONFIG_440GX */
/* The following is for compatibility with 405 code */
#define uicsr uic0sr
@@ -673,16 +673,16 @@
#define maltxctp3r (MAL_DCR_BASE+0x23) /* TX 3 Channel table pointer reg */
#define malrxctp0r (MAL_DCR_BASE+0x40) /* RX 0 Channel table pointer reg */
#define malrxctp1r (MAL_DCR_BASE+0x41) /* RX 1 Channel table pointer reg */
-#if defined(CONFIG_440_GX)
+#if defined(CONFIG_440GX)
#define malrxctp2r (MAL_DCR_BASE+0x42) /* RX 0 Channel table pointer reg */
#define malrxctp3r (MAL_DCR_BASE+0x43) /* RX 1 Channel table pointer reg */
-#endif /* CONFIG_440_GX */
+#endif /* CONFIG_440GX */
#define malrcbs0 (MAL_DCR_BASE+0x60) /* RX 0 Channel buffer size reg */
#define malrcbs1 (MAL_DCR_BASE+0x61) /* RX 1 Channel buffer size reg */
-#if defined(CONFIG_440_GX)
+#if defined(CONFIG_440GX)
#define malrcbs2 (MAL_DCR_BASE+0x62) /* RX 2 Channel buffer size reg */
#define malrcbs3 (MAL_DCR_BASE+0x63) /* RX 3 Channel buffer size reg */
-#endif /* CONFIG_440_GX */
+#endif /* CONFIG_440GX */
/*---------------------------------------------------------------------------+
@@ -770,7 +770,7 @@
/*---------------------------------------------------------------------------+
| Universal interrupt controller 2 interrupts (UIC2)
+---------------------------------------------------------------------------*/
-#if defined(CONFIG_440_GX)
+#if defined(CONFIG_440GX)
#define UIC_ETH2 0x80000000 /* Ethernet 2 */
#define UIC_EWU2 0x40000000 /* Ethernet 2 wakeup */
#define UIC_ETH3 0x20000000 /* Ethernet 3 */
@@ -803,12 +803,12 @@
#define UIC_RSVD29 0x00000004 /* Reserved */
#define UIC_RSVD30 0x00000002 /* Reserved */
#define UIC_RSVD31 0x00000001 /* Reserved */
-#endif /* CONFIG_440_GX */
+#endif /* CONFIG_440GX */
/*---------------------------------------------------------------------------+
| Universal interrupt controller Base 0 interrupts (UICB0)
+---------------------------------------------------------------------------*/
-#if defined(CONFIG_440_GX)
+#if defined(CONFIG_440GX)
#define UICB0_UIC0CI 0x80000000 /* UIC0 Critical Interrupt */
#define UICB0_UIC0NCI 0x40000000 /* UIC0 Noncritical Interrupt */
#define UICB0_UIC1CI 0x20000000 /* UIC1 Critical Interrupt */
@@ -818,7 +818,7 @@
#define UICB0_ALL (UICB0_UIC0CI | UICB0_UIC0NCI | UICB0_UIC1CI | \
UICB0_UIC1NCI | UICB0_UIC2CI | UICB0_UIC2NCI)
-#endif /* CONFIG_440_GX */
+#endif /* CONFIG_440GX */
/*-----------------------------------------------------------------------------+
| External Bus Controller Bit Settings
@@ -1194,7 +1194,7 @@
/*-----------------------------------------------------------------------------+
| Clocking
+-----------------------------------------------------------------------------*/
-#if !defined (CONFIG_440_GX) && !defined(CONFIG_440_EP) && !defined(CONFIG_440_GR)
+#if !defined (CONFIG_440GX) && !defined(CONFIG_440EP) && !defined(CONFIG_440GR)
#define PLLSYS0_TUNE_MASK 0xffc00000 /* PLL TUNE bits */
#define PLLSYS0_FB_DIV_MASK 0x003c0000 /* Feedback divisor */
#define PLLSYS0_FWD_DIV_A_MASK 0x00038000 /* Forward divisor A */
@@ -1212,7 +1212,7 @@
#define PLL_VCO_FREQ_MAX 1000 /* Max VCO freq (MHz) */
#define PLL_CPU_FREQ_MAX 400 /* Max CPU freq (MHz) */
#define PLL_PLB_FREQ_MAX 133 /* Max PLB freq (MHz) */
-#else /* !CONFIG_440_GX or CONFIG_440_EP or CONFIG_440_GR */
+#else /* !CONFIG_440GX or CONFIG_440EP or CONFIG_440GR */
#define PLLSYS0_ENG_MASK 0x80000000 /* 0 = SysClk, 1 = PLL VCO */
#define PLLSYS0_SRC_MASK 0x40000000 /* 0 = PLL A, 1 = PLL B */
#define PLLSYS0_SEL_MASK 0x38000000 /* 0 = PLL, 1 = CPU, 5 = PerClk */
@@ -1260,7 +1260,7 @@
#define PLLSYS1_RMII_MASK 0x00000004 /* RMII Mode */
#define PLLSYS1_TRE_MASK 0x00000002 /* GPIO Trace Enable */
#define PLLSYS1_NTO1_MASK 0x00000001 /* CPU:PLB N-to-1 ratio */
-#endif /* CONFIG_440_GX */
+#endif /* CONFIG_440GX */
/*-----------------------------------------------------------------------------
| IIC Register Offsets
@@ -1303,7 +1303,7 @@
#define PCIX0_CFGBASE (CFG_PCI_BASE + 0x0ec80000)
#define PCIX0_IOBASE (CFG_PCI_BASE + 0x08000000)
-#if defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
+#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
/* PCI Local Configuration Registers
--------------------------------- */
@@ -1387,12 +1387,12 @@
#define PCIX0_STS (PCIX0_CFGBASE + 0x00e0)
-#endif /* !defined(CONFIG_440_EP) !defined(CONFIG_440_GR) */
+#endif /* !defined(CONFIG_440EP) !defined(CONFIG_440GR) */
/******************************************************************************
* GPIO macro register defines
******************************************************************************/
-#if defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
+#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
#define GPIO_BASE0 (CFG_PERIPHERAL_BASE+0x00000B00)
#define GPIO_BASE1 (CFG_PERIPHERAL_BASE+0x00000C00)
diff --git a/lib_ppc/board.c b/lib_ppc/board.c
index c4b16e8db38c14d7a1f2dc0843cc80c90646f219..09c4f646030b40cba6e8661a8d76ad14a174de64 100644
--- a/lib_ppc/board.c
+++ b/lib_ppc/board.c
@@ -547,7 +547,7 @@ void board_init_f (ulong bootflag)
bd->bi_procfreq = gd->cpu_clk; /* Processor Speed, In Hz */
bd->bi_plb_busfreq = gd->bus_clk;
-#if defined(CONFIG_405GP) || defined(CONFIG_405EP) || defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
+#if defined(CONFIG_405GP) || defined(CONFIG_405EP) || defined(CONFIG_440EP) || defined(CONFIG_440GR)
bd->bi_pci_busfreq = get_PCI_freq ();
bd->bi_opbfreq = get_OPB_freq ();
#elif defined(CONFIG_XILINX_ML300)