diff --git a/arch/arm/mach-exynos/dmc_init_ddr3.c b/arch/arm/mach-exynos/dmc_init_ddr3.c
index 25a9df936479c8ce18a01e5b676e81ea096294e2..6a5d26cc69dbe7952c1a98416b9a4315a56c3451 100644
--- a/arch/arm/mach-exynos/dmc_init_ddr3.c
+++ b/arch/arm/mach-exynos/dmc_init_ddr3.c
@@ -618,7 +618,7 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, int reset)
/*
* Send NOP, MRS and ZQINIT commands
* Sending MRS command will reset the DRAM. We should not be
- * reseting the DRAM after resume, this will lead to memory
+ * resetting the DRAM after resume, this will lead to memory
* corruption as DRAM content is lost after DRAM reset
*/
dmc_config_mrs(mem, &drex0->directcmd);
diff --git a/arch/arm/mach-socfpga/misc.c b/arch/arm/mach-socfpga/misc.c
index 5cbd8a432558207e776d7f02dd5958ea20753465..dd6b53b24df06a8162c8e16bd6765e55c57d3a78 100644
--- a/arch/arm/mach-socfpga/misc.c
+++ b/arch/arm/mach-socfpga/misc.c
@@ -362,7 +362,7 @@ int arch_early_init_r(void)
* issuing warm reset. The ancient kernel code expects this
* value to be written into the register by the bootloader, so
* to support that old code, we write it here instead of in the
- * reset_cpu() function just before reseting the CPU.
+ * reset_cpu() function just before resetting the CPU.
*/
writel(0xae9efebc, &sysmgr_regs->romcodegrp_warmramgrp_enable);
diff --git a/arch/mips/mach-au1x00/au1x00_usb_ohci.c b/arch/mips/mach-au1x00/au1x00_usb_ohci.c
index 42484e57121fbf1e84da8299d73b9c35e764b873..088e61210523105ad20d5a9de9779d8a0f670c5b 100644
--- a/arch/mips/mach-au1x00/au1x00_usb_ohci.c
+++ b/arch/mips/mach-au1x00/au1x00_usb_ohci.c
@@ -671,7 +671,8 @@ static void td_submit_job (struct usb_device *dev, unsigned long pipe, void *buf
__u32 info = 0;
unsigned int toggle = 0;
- /* OHCI handles the DATA-toggles itself, we just use the USB-toggle bits for reseting */
+ /* OHCI handles the DATA-toggles itself, we just use the
+ USB-toggle bits for resetting */
if(usb_gettoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe))) {
toggle = TD_T_TOGGLE;
} else {
diff --git a/arch/powerpc/cpu/mpc5xxx/usb_ohci.c b/arch/powerpc/cpu/mpc5xxx/usb_ohci.c
index b7c1b5594a003a4c7b28f98ec3db67d48d199061..cf36954fe7e6c4efa722b9583eb105a7887fe69b 100644
--- a/arch/powerpc/cpu/mpc5xxx/usb_ohci.c
+++ b/arch/powerpc/cpu/mpc5xxx/usb_ohci.c
@@ -670,7 +670,8 @@ static void td_submit_job (struct usb_device *dev, unsigned long pipe, void *buf
__u32 info = 0;
unsigned int toggle = 0;
- /* OHCI handles the DATA-toggles itself, we just use the USB-toggle bits for reseting */
+ /* OHCI handles the DATA-toggles itself, we just use the
+ USB-toggle bits for resetting */
if(usb_gettoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe))) {
toggle = TD_T_TOGGLE;
} else {
diff --git a/arch/powerpc/cpu/ppc4xx/usb_ohci.c b/arch/powerpc/cpu/ppc4xx/usb_ohci.c
index 65a0675446e5bf41030d80e8dea1c1c2e18f76c5..27423e377927c98d5ca501877986c6337014e78b 100644
--- a/arch/powerpc/cpu/ppc4xx/usb_ohci.c
+++ b/arch/powerpc/cpu/ppc4xx/usb_ohci.c
@@ -673,7 +673,8 @@ static void td_submit_job (struct usb_device *dev, unsigned long pipe, void *buf
__u32 info = 0;
unsigned int toggle = 0;
- /* OHCI handles the DATA-toggles itself, we just use the USB-toggle bits for reseting */
+ /* OHCI handles the DATA-toggles itself, we just use the
+ USB-toggle bits for resetting */
if(usb_gettoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe))) {
toggle = TD_T_TOGGLE;
} else {
diff --git a/drivers/net/fec_mxc.c b/drivers/net/fec_mxc.c
index 8e3b83986501b4194d3af4cd37aa4c60c55b13af..84021ea5bec553fba2469be9867ecf1af7abbcb7 100644
--- a/drivers/net/fec_mxc.c
+++ b/drivers/net/fec_mxc.c
@@ -1024,7 +1024,7 @@ static int fec_probe(bd_t *bd, int dev_id, uint32_t base_addr,
start = get_timer(0);
while (readl(&fec->eth->ecntrl) & FEC_ECNTRL_RESET) {
if (get_timer(start) > (CONFIG_SYS_HZ * 5)) {
- printf("FEC MXC: Timeout reseting chip\n");
+ printf("FEC MXC: Timeout resetting chip\n");
goto err4;
}
udelay(10);
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index 0f6d03ec3bca7703ef89719bea78552856570265..80cfe11290e212d40e755a112509fcd20a6eb0ac 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -964,7 +964,7 @@ static void td_submit_job(ohci_t *ohci, struct usb_device *dev,
flush_dcache_buffer(buffer, data_len);
/* OHCI handles the DATA-toggles itself, we just use the USB-toggle
- * bits for reseting */
+ * bits for resetting */
if (usb_gettoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe))) {
toggle = TD_T_TOGGLE;
} else {
diff --git a/drivers/usb/host/ohci-s3c24xx.c b/drivers/usb/host/ohci-s3c24xx.c
index 8bb2275c09473a6e9a8e15486ea44e9849d05633..28b9ab51769013cbc1c8967dc586ba0c04b57dda 100644
--- a/drivers/usb/host/ohci-s3c24xx.c
+++ b/drivers/usb/host/ohci-s3c24xx.c
@@ -677,7 +677,7 @@ static void td_submit_job(struct usb_device *dev, unsigned long pipe,
unsigned int toggle = 0;
/* OHCI handles the DATA-toggles itself, we just
- use the USB-toggle bits for reseting */
+ use the USB-toggle bits for resetting */
if (usb_gettoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe))) {
toggle = TD_T_TOGGLE;
} else {
diff --git a/include/vsprintf.h b/include/vsprintf.h
index 60e91d119eeed301799b3321d36d1616cdb9ae91..e38076d22d4ff7d4aa2415430ee0328942041ab4 100644
--- a/include/vsprintf.h
+++ b/include/vsprintf.h
@@ -72,7 +72,7 @@ long trailing_strtoln(const char *str, const char *end);
* panic() - Print a message and reset/hang
*
* Prints a message on the console(s) and then resets. If CONFIG_PANIC_HANG is
- * defined, then it will hang instead of reseting.
+ * defined, then it will hang instead of resetting.
*
* @param fmt: printf() format string for message, which should not include
* \n, followed by arguments
@@ -84,7 +84,7 @@ void panic(const char *fmt, ...)
* panic_str() - Print a message and reset/hang
*
* Prints a message on the console(s) and then resets. If CONFIG_PANIC_HANG is
- * defined, then it will hang instead of reseting.
+ * defined, then it will hang instead of resetting.
*
* This function can be used instead of panic() when your board does not
* already use printf(), * to keep code size small.