diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 506463c12cc482eb1fb70a04957e1e603cf8f9c8..3355b3bcaa583013782c0086054bb39936ff8755 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -643,11 +643,17 @@ config ARCH_SOCFPGA
config ARCH_SUNXI
bool "Support sunxi (Allwinner) SoCs"
+ select CMD_USB
select DM
select DM_GPIO
+ select DM_ETH
+ select DM_SERIAL
+ select DM_USB
select OF_CONTROL
select OF_SEPARATE
select SPL_DISABLE_OF_CONTROL
+ select USB
+ select USB_STORAGE
config TARGET_SNOWBALL
bool "Support snowball"
diff --git a/arch/arm/cpu/armv7/sunxi/board.c b/arch/arm/cpu/armv7/sunxi/board.c
index 5f39aa07cfb03dc66c35cc8b973f14ee49aeeda1..f01846ef9a6bf9c715fb91d5dc29bbe487ed660a 100644
--- a/arch/arm/cpu/armv7/sunxi/board.c
+++ b/arch/arm/cpu/armv7/sunxi/board.c
@@ -11,6 +11,7 @@
*/
#include <common.h>
+#include <mmc.h>
#include <i2c.h>
#include <serial.h>
#ifdef CONFIG_SPL_BUILD
@@ -22,6 +23,7 @@
#include <asm/arch/gpio.h>
#include <asm/arch/sys_proto.h>
#include <asm/arch/timer.h>
+#include <asm/arch/mmc.h>
#include <linux/compiler.h>
@@ -121,17 +123,18 @@ void s_init(void)
}
#ifdef CONFIG_SPL_BUILD
+DECLARE_GLOBAL_DATA_PTR;
+
/* The sunxi internal brom will try to loader external bootloader
* from mmc0, nand flash, mmc2.
- * Unfortunately we can't check how SPL was loaded so assume
- * it's always the first SD/MMC controller
*/
u32 spl_boot_device(void)
{
+ struct mmc *mmc0, *mmc1;
/*
- * When booting from the SD card, the "eGON.BT0" signature is expected
- * to be found in memory at the address 0x0004 (see the "mksunxiboot"
- * tool, which generates this header).
+ * When booting from the SD card or NAND memory, the "eGON.BT0"
+ * signature is expected to be found in memory at the address 0x0004
+ * (see the "mksunxiboot" tool, which generates this header).
*
* When booting in the FEL mode over USB, this signature is patched in
* memory and replaced with something else by the 'fel' tool. This other
@@ -139,15 +142,40 @@ u32 spl_boot_device(void)
* valid bootable SD card image (because the BROM would refuse to
* execute the SPL in this case).
*
- * This branch is just making a decision at runtime whether to load
- * the main u-boot binary from the SD card (if the "eGON.BT0" signature
- * is found) or return to the FEL code in the BROM to wait and receive
- * the main u-boot binary over USB.
+ * This checks for the signature and if it is not found returns to
+ * the FEL code in the BROM to wait and receive the main u-boot
+ * binary over USB. If it is found, it determines where SPL was
+ * read from.
*/
- if (readl(4) == 0x4E4F4765 && readl(8) == 0x3054422E) /* eGON.BT0 */
- return BOOT_DEVICE_MMC1;
- else
+ if (readl(4) != 0x4E4F4765 || readl(8) != 0x3054422E) /* eGON.BT0 */
return BOOT_DEVICE_BOARD;
+
+ /* The BROM will try to boot from mmc0 first, so try that first. */
+ mmc_initialize(gd->bd);
+ mmc0 = find_mmc_device(0);
+ if (sunxi_mmc_has_egon_boot_signature(mmc0))
+ return BOOT_DEVICE_MMC1;
+
+ /* Fallback to booting NAND if enabled. */
+ if (IS_ENABLED(CONFIG_SPL_NAND_SUPPORT))
+ return BOOT_DEVICE_NAND;
+
+ if (CONFIG_MMC_SUNXI_SLOT_EXTRA == 2) {
+ mmc1 = find_mmc_device(1);
+ if (sunxi_mmc_has_egon_boot_signature(mmc1)) {
+ /*
+ * spl_mmc.c: spl_mmc_load_image() is hard-coded to
+ * use find_mmc_device(0), no matter what we
+ * return. Swap mmc0 and mmc2 to make this work.
+ */
+ mmc0->block_dev.dev = 1;
+ mmc1->block_dev.dev = 0;
+ return BOOT_DEVICE_MMC2;
+ }
+ }
+
+ panic("Could not determine boot source\n");
+ return -1; /* Never reached */
}
/* No confirmation data available in SPL yet. Hardcode bootmode */
diff --git a/arch/arm/cpu/armv7/sunxi/usb_phy.c b/arch/arm/cpu/armv7/sunxi/usb_phy.c
index b07d67ff3f82f18b1c57a153ff5e3e21f3675fa3..4d63a7449d7ced3becdd4348054047cdb5e6a9cf 100644
--- a/arch/arm/cpu/armv7/sunxi/usb_phy.c
+++ b/arch/arm/cpu/armv7/sunxi/usb_phy.c
@@ -44,6 +44,7 @@ static struct sunxi_usb_phy {
int usb_rst_mask;
int gpio_vbus;
int gpio_vbus_det;
+ int gpio_id_det;
int id;
int init_count;
int power_on_count;
@@ -82,6 +83,14 @@ static int get_vbus_detect_gpio(int index)
return -EINVAL;
}
+static int get_id_detect_gpio(int index)
+{
+ switch (index) {
+ case 0: return sunxi_name_to_gpio(CONFIG_USB0_ID_DET);
+ }
+ return -EINVAL;
+}
+
static void usb_phy_write(struct sunxi_usb_phy *phy, int addr,
int data, int len)
{
@@ -228,10 +237,8 @@ int sunxi_usb_phy_vbus_detect(int index)
struct sunxi_usb_phy *phy = &sunxi_usb_phy[index];
int err, retries = 3;
- if (phy->gpio_vbus_det < 0) {
- eprintf("Error: invalid vbus detection pin\n");
+ if (phy->gpio_vbus_det < 0)
return phy->gpio_vbus_det;
- }
err = gpio_get_value(phy->gpio_vbus_det);
/*
@@ -247,6 +254,16 @@ int sunxi_usb_phy_vbus_detect(int index)
return err;
}
+int sunxi_usb_phy_id_detect(int index)
+{
+ struct sunxi_usb_phy *phy = &sunxi_usb_phy[index];
+
+ if (phy->gpio_id_det < 0)
+ return phy->gpio_id_det;
+
+ return gpio_get_value(phy->gpio_id_det);
+}
+
int sunxi_usb_phy_probe(void)
{
struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
@@ -275,6 +292,18 @@ int sunxi_usb_phy_probe(void)
if (ret)
return ret;
}
+
+ phy->gpio_id_det = get_id_detect_gpio(i);
+ if (phy->gpio_id_det >= 0) {
+ ret = gpio_request(phy->gpio_id_det, "usb_id_det");
+ if (ret)
+ return ret;
+ ret = gpio_direction_input(phy->gpio_id_det);
+ if (ret)
+ return ret;
+ sunxi_gpio_set_pull(phy->gpio_id_det,
+ SUNXI_GPIO_PULL_UP);
+ }
}
setbits_le32(&ccm->usb_clk_cfg, CCM_USB_CTRL_PHYGATE);
@@ -298,6 +327,9 @@ int sunxi_usb_phy_remove(void)
if (phy->gpio_vbus_det >= 0)
gpio_free(phy->gpio_vbus_det);
+
+ if (phy->gpio_id_det >= 0)
+ gpio_free(phy->gpio_id_det);
}
return 0;
diff --git a/arch/arm/dts/sun5i-a13-utoo-p66.dts b/arch/arm/dts/sun5i-a13-utoo-p66.dts
index 8c1bca70390d76300727e78fa40e42701f6163e2..514f159a14d42d369c1de6159185d593b6e78be0 100644
--- a/arch/arm/dts/sun5i-a13-utoo-p66.dts
+++ b/arch/arm/dts/sun5i-a13-utoo-p66.dts
@@ -52,14 +52,6 @@
model = "Utoo P66";
compatible = "utoo,p66", "allwinner,sun5i-a13";
- aliases {
- serial0 = &uart1;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
i2c_lcd: i2c@0 {
/* The lcd panel i2c interface is hooked up via gpios */
compatible = "i2c-gpio";
@@ -227,12 +219,6 @@
status = "okay";
};
-&uart1 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart1_pins_b>;
- status = "okay";
-};
-
&usbphy {
usb0_vbus-supply = <®_usb0_vbus>;
usb1_vbus-supply = <®_ldo3>;
diff --git a/arch/arm/dts/sun8i-a23-a33.dtsi b/arch/arm/dts/sun8i-a23-a33.dtsi
index 7abd0ae3143d74e1f9ba9b2638fc55353a306d7c..5cd2e92c1940ad1c0807d25d3adfb0c00ebf9af4 100644
--- a/arch/arm/dts/sun8i-a23-a33.dtsi
+++ b/arch/arm/dts/sun8i-a23-a33.dtsi
@@ -332,6 +332,24 @@
#size-cells = <0>;
};
+ ehci0: usb@01c1a000 {
+ compatible = "allwinner,sun8i-a23-ehci", "generic-ehci";
+ reg = <0x01c1a000 0x100>;
+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ahb1_gates 26>;
+ resets = <&ahb1_rst 26>;
+ status = "disabled";
+ };
+
+ ohci0: usb@01c1a400 {
+ compatible = "allwinner,sun8i-a23-ohci", "generic-ohci";
+ reg = <0x01c1a400 0x100>;
+ interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ahb1_gates 29>, <&usb_clk 16>;
+ resets = <&ahb1_rst 29>;
+ status = "disabled";
+ };
+
pio: pinctrl@01c20800 {
/* compatible gets set in SoC specific dtsi file */
reg = <0x01c20800 0x400>;
diff --git a/arch/arm/dts/sun8i-a33-ga10h-v1.1.dts b/arch/arm/dts/sun8i-a33-ga10h-v1.1.dts
index 866703355b9c901cb2a2b3aaffe8dd764840d87a..da16343346407a6b8e9112527a5f12744be19dc8 100644
--- a/arch/arm/dts/sun8i-a33-ga10h-v1.1.dts
+++ b/arch/arm/dts/sun8i-a33-ga10h-v1.1.dts
@@ -61,6 +61,10 @@
};
};
+&ehci0 {
+ status = "okay";
+};
+
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
@@ -109,6 +113,10 @@
status = "okay";
};
+&ohci0 {
+ status = "okay";
+};
+
&pio {
mmc0_cd_pin_q8h: mmc0_cd_pin@0 {
allwinner,pins = "PB4";
diff --git a/arch/arm/include/asm/arch-sunxi/mmc.h b/arch/arm/include/asm/arch-sunxi/mmc.h
index cb52e648731ce9687b7c9cb472463fd54d8da38d..3da360b177d9b2a0369745f253a759652aac32ca 100644
--- a/arch/arm/include/asm/arch-sunxi/mmc.h
+++ b/arch/arm/include/asm/arch-sunxi/mmc.h
@@ -127,4 +127,5 @@ struct sunxi_mmc {
#define SUNXI_MMC_COMMON_RESET (1 << 18)
struct mmc *sunxi_mmc_init(int sdc_no);
+int sunxi_mmc_has_egon_boot_signature(struct mmc *mmc);
#endif /* _SUNXI_MMC_H */
diff --git a/arch/arm/include/asm/arch-sunxi/usb_phy.h b/arch/arm/include/asm/arch-sunxi/usb_phy.h
index b7b831e24aaa9c4960ff065a9136522768424d49..17d31b8e31c09e2240095e57e5ad47c501a501de 100644
--- a/arch/arm/include/asm/arch-sunxi/usb_phy.h
+++ b/arch/arm/include/asm/arch-sunxi/usb_phy.h
@@ -17,4 +17,12 @@ void sunxi_usb_phy_exit(int index);
void sunxi_usb_phy_power_on(int index);
void sunxi_usb_phy_power_off(int index);
int sunxi_usb_phy_vbus_detect(int index);
+int sunxi_usb_phy_id_detect(int index);
void sunxi_usb_phy_enable_squelch_detect(int index, int enable);
+
+/* Not really phy related, but we have to declare this somewhere ... */
+#if defined(CONFIG_MUSB_HOST) || defined(CONFIG_MUSB_GADGET)
+void sunxi_musb_board_init(void);
+#else
+#define sunxi_musb_board_init()
+#endif
diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig
index 2a1cd3cf3bc16e840262ca5b75d914578f543c34..441c88081389a49607b739c9b884b8bba58bf5ee 100644
--- a/board/sunxi/Kconfig
+++ b/board/sunxi/Kconfig
@@ -294,6 +294,13 @@ config USB0_VBUS_DET
Set the Vbus detect pin for usb0 (otg). This takes a string in the
format understood by sunxi_name_to_gpio, e.g. PH1 for pin 1 of port H.
+config USB0_ID_DET
+ string "ID detect pin for usb0 (otg)"
+ default ""
+ ---help---
+ Set the ID detect pin for usb0 (otg). This takes a string in the
+ format understood by sunxi_name_to_gpio, e.g. PH1 for pin 1 of port H.
+
config USB1_VBUS_PIN
string "Vbus enable pin for usb1 (ehci0)"
default "PH6" if MACH_SUN4I || MACH_SUN7I
diff --git a/board/sunxi/board.c b/board/sunxi/board.c
index ed60e74808ffd4c8b6187d5cb5f1c0d231a40e8c..afed6a31cab6732f334d8dba2272730ee8306ac4 100644
--- a/board/sunxi/board.c
+++ b/board/sunxi/board.c
@@ -31,7 +31,6 @@
#include <asm/arch/usb_phy.h>
#include <asm/gpio.h>
#include <asm/io.h>
-#include <linux/usb/musb.h>
#include <net.h>
#if defined CONFIG_VIDEO_LCD_PANEL_I2C && !(defined CONFIG_SPL_BUILD)
@@ -294,21 +293,19 @@ int board_mmc_init(bd_t *bis)
return -1;
#endif
-#if CONFIG_MMC_SUNXI_SLOT == 0 && CONFIG_MMC_SUNXI_SLOT_EXTRA == 2
+#if !defined(CONFIG_SPL_BUILD) && CONFIG_MMC_SUNXI_SLOT_EXTRA == 2
/*
- * Both mmc0 and mmc2 are bootable, figure out where we're booting
- * from. Try mmc0 first, just like the brom does.
+ * On systems with an emmc (mmc2), figure out if we are booting from
+ * the emmc and if we are make it "mmc dev 0" so that boot.scr, etc.
+ * are searched there first. Note we only do this for u-boot proper,
+ * not for the SPL, see spl_boot_device().
*/
- if (mmc_getcd(mmc0) && mmc_init(mmc0) == 0 &&
- mmc0->block_dev.block_read(0, 16, 1, buf) == 1) {
- buf[12] = 0;
- if (strcmp(&buf[4], "eGON.BT0") == 0)
- return 0;
+ if (!sunxi_mmc_has_egon_boot_signature(mmc0) &&
+ sunxi_mmc_has_egon_boot_signature(mmc1)) {
+ /* Booting from emmc / mmc2, swap */
+ mmc0->block_dev.dev = 1;
+ mmc1->block_dev.dev = 0;
}
-
- /* no bootable card in mmc0, so we must be booting from mmc2, swap */
- mmc0->block_dev.dev = 1;
- mmc1->block_dev.dev = 0;
#endif
return 0;
@@ -451,28 +448,6 @@ void sunxi_board_init(void)
}
#endif
-#if defined(CONFIG_MUSB_HOST) || defined(CONFIG_MUSB_GADGET)
-extern const struct musb_platform_ops sunxi_musb_ops;
-
-static struct musb_hdrc_config musb_config = {
- .multipoint = 1,
- .dyn_fifo = 1,
- .num_eps = 6,
- .ram_bits = 11,
-};
-
-static struct musb_hdrc_platform_data musb_plat = {
-#if defined(CONFIG_MUSB_HOST)
- .mode = MUSB_HOST,
-#else
- .mode = MUSB_PERIPHERAL,
-#endif
- .config = &musb_config,
- .power = 250,
- .platform_ops = &sunxi_musb_ops,
-};
-#endif
-
#ifdef CONFIG_USB_GADGET
int g_dnl_board_usb_cable_connected(void)
{
@@ -535,9 +510,8 @@ int misc_init_r(void)
if (ret)
return ret;
#endif
-#if defined(CONFIG_MUSB_HOST) || defined(CONFIG_MUSB_GADGET)
- musb_register(&musb_plat, NULL, (void *)SUNXI_USB0_BASE);
-#endif
+ sunxi_musb_board_init();
+
return 0;
}
#endif
diff --git a/configs/A10-OLinuXino-Lime_defconfig b/configs/A10-OLinuXino-Lime_defconfig
index 87ade906ce5b06f8845e90402565187ba518fe90..0245bfc763cd3ca3826abec74ca8cce23a3c407e 100644
--- a/configs/A10-OLinuXino-Lime_defconfig
+++ b/configs/A10-OLinuXino-Lime_defconfig
@@ -7,11 +7,8 @@ CONFIG_SYS_CLK_FREQ=912000000
CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-olinuxino-lime"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC,AHCI,SATAPWR=SUNXI_GPC(3),USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC,AHCI,SATAPWR=SUNXI_GPC(3)"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
-CONFIG_DM_SERIAL=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
diff --git a/configs/A10s-OLinuXino-M_defconfig b/configs/A10s-OLinuXino-M_defconfig
index 5a450af7bdd435a62073bc561988e812cbea5a82..7783c7daf476071192bc1755b12f60c714781528 100644
--- a/configs/A10s-OLinuXino-M_defconfig
+++ b/configs/A10s-OLinuXino-M_defconfig
@@ -9,11 +9,8 @@ CONFIG_USB1_VBUS_PIN="PB10"
CONFIG_DEFAULT_DEVICE_TREE="sun5i-a10s-olinuxino-micro"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="AXP152_POWER,SUNXI_EMAC,USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP152_POWER,SUNXI_EMAC"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
-CONFIG_DM_SERIAL=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
diff --git a/configs/A13-OLinuXinoM_defconfig b/configs/A13-OLinuXinoM_defconfig
index 213ece6c4c56ff66f7cfef06392d0266c013ac11..dcaaff9220ff4c4df6c5d088aae7378faa05bbe8 100644
--- a/configs/A13-OLinuXinoM_defconfig
+++ b/configs/A13-OLinuXinoM_defconfig
@@ -13,11 +13,8 @@ CONFIG_VIDEO_LCD_BL_PWM="PB2"
CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-olinuxino-micro"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2,USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
-CONFIG_DM_SERIAL=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
diff --git a/configs/A13-OLinuXino_defconfig b/configs/A13-OLinuXino_defconfig
index d71c11cbbd00d0662323e0800fd585e034da0752..4b4337223ca517d86b9b12e7d1a91cbcbb64d021 100644
--- a/configs/A13-OLinuXino_defconfig
+++ b/configs/A13-OLinuXino_defconfig
@@ -14,11 +14,8 @@ CONFIG_VIDEO_LCD_BL_PWM="PB2"
CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-olinuxino"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2,AXP209_POWER,USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2,AXP209_POWER"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
-CONFIG_DM_SERIAL=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
diff --git a/configs/A20-OLinuXino-Lime2_defconfig b/configs/A20-OLinuXino-Lime2_defconfig
index 6445b25eb194ee9c91dd2620660c38aa4c60da14..c9d0f471238c5984135804d11713e6088eb2690e 100644
--- a/configs/A20-OLinuXino-Lime2_defconfig
+++ b/configs/A20-OLinuXino-Lime2_defconfig
@@ -8,12 +8,9 @@ CONFIG_USB0_VBUS_DET="PH5"
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olinuxino-lime2"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPC(3),USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPC(3)"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
CONFIG_ETH_DESIGNWARE=y
-CONFIG_DM_SERIAL=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
diff --git a/configs/A20-OLinuXino-Lime_defconfig b/configs/A20-OLinuXino-Lime_defconfig
index 650670fb1e2024578cd465d4da815e798dd82bcb..fb1f24002c3b41555862dc530f893dae6c92a037 100644
--- a/configs/A20-OLinuXino-Lime_defconfig
+++ b/configs/A20-OLinuXino-Lime_defconfig
@@ -5,12 +5,9 @@ CONFIG_DRAM_CLK=480
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olinuxino-lime"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPC(3),USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPC(3)"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
CONFIG_ETH_DESIGNWARE=y
-CONFIG_DM_SERIAL=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
diff --git a/configs/A20-OLinuXino_MICRO_defconfig b/configs/A20-OLinuXino_MICRO_defconfig
index 3f925049c4c5b512111fca1e12e1c61aadfecabf..a7f1395887a2e85d2c1fc3df883caaa23f15bae3 100644
--- a/configs/A20-OLinuXino_MICRO_defconfig
+++ b/configs/A20-OLinuXino_MICRO_defconfig
@@ -9,12 +9,9 @@ CONFIG_VIDEO_VGA=y
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olinuxino-micro"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPB(8),USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPB(8)"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
CONFIG_ETH_DESIGNWARE=y
-CONFIG_DM_SERIAL=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
diff --git a/configs/Ainol_AW1_defconfig b/configs/Ainol_AW1_defconfig
index f94cd5a2ce8ddcdad16e4b97ab7db6c4c64748fb..e1262e67ea395d6928f446b72213b2725dec56ec 100644
--- a/configs/Ainol_AW1_defconfig
+++ b/configs/Ainol_AW1_defconfig
@@ -19,5 +19,3 @@ CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
-CONFIG_DM_SERIAL=y
diff --git a/configs/Ampe_A76_defconfig b/configs/Ampe_A76_defconfig
index 99aa141e524871469da09fa42647f0a7755a2492..2ee0307c0c072e200c72a9ea72516eb8927b63af 100644
--- a/configs/Ampe_A76_defconfig
+++ b/configs/Ampe_A76_defconfig
@@ -18,5 +18,3 @@ CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2,AXP209_POWER"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
-CONFIG_DM_SERIAL=y
diff --git a/configs/Auxtek-T004_defconfig b/configs/Auxtek-T004_defconfig
index 016ccd9e993629351f982212cde9366f8f037593..c0191760b219de71646c4dbedf072bed92314bc2 100644
--- a/configs/Auxtek-T004_defconfig
+++ b/configs/Auxtek-T004_defconfig
@@ -6,11 +6,8 @@ CONFIG_USB1_VBUS_PIN="PG13"
CONFIG_DEFAULT_DEVICE_TREE="sun5i-a10s-auxtek-t004"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="AXP152_POWER,USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP152_POWER"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
-CONFIG_DM_SERIAL=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
diff --git a/configs/Bananapi_defconfig b/configs/Bananapi_defconfig
index 3e186f6d0e058ca111197d6d3664414583012547..4b9ef35f58141f19c4c634340cef2c218764171a 100644
--- a/configs/Bananapi_defconfig
+++ b/configs/Bananapi_defconfig
@@ -6,12 +6,9 @@ CONFIG_GMAC_TX_DELAY=3
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-bananapi"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHCI,USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHCI"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
CONFIG_ETH_DESIGNWARE=y
-CONFIG_DM_SERIAL=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
diff --git a/configs/Bananapro_defconfig b/configs/Bananapro_defconfig
index 5bd2fd6a59b40cb7c5e7491ddfcb40acc15e2d51..5506ab323136313062532ae471641851fbba8b1e 100644
--- a/configs/Bananapro_defconfig
+++ b/configs/Bananapro_defconfig
@@ -8,12 +8,9 @@ CONFIG_GMAC_TX_DELAY=3
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-bananapro"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHCI,USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHCI"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
CONFIG_ETH_DESIGNWARE=y
-CONFIG_DM_SERIAL=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
diff --git a/configs/CSQ_CS908_defconfig b/configs/CSQ_CS908_defconfig
index 54f4846e4a63576fd30c740fc9fab9cc90039ad6..fe88a7b29f61bbc7d4648f97af94b449efaa69d2 100644
--- a/configs/CSQ_CS908_defconfig
+++ b/configs/CSQ_CS908_defconfig
@@ -7,14 +7,12 @@ CONFIG_USB2_VBUS_PIN=""
CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31s-cs908"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="USB_EHCI,SUNXI_GMAC"
+CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
CONFIG_ETH_DESIGNWARE=y
-CONFIG_DM_SERIAL=y
CONFIG_AXP221_DLDO1_VOLT=3300
CONFIG_AXP221_ALDO1_VOLT=3300
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_MUSB_SUNXI=y
diff --git a/configs/Chuwi_V7_CW0825_defconfig b/configs/Chuwi_V7_CW0825_defconfig
index 3a2a219f48fa96f44aafa630e10f8a4b92884840..cb659c902ce30bbeaeaceac6272fc51faab46b0d 100644
--- a/configs/Chuwi_V7_CW0825_defconfig
+++ b/configs/Chuwi_V7_CW0825_defconfig
@@ -18,8 +18,6 @@ CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
-CONFIG_DM_SERIAL=y
CONFIG_VIDEO_LCD_SPI_CS="PA0"
CONFIG_VIDEO_LCD_SPI_SCLK="PA1"
CONFIG_VIDEO_LCD_SPI_MOSI="PA2"
diff --git a/configs/Colombus_defconfig b/configs/Colombus_defconfig
index 9d84901d00cd2f642a019640ba6c24452aa1dbcd..1ae8c168e805ed15e5ab67f386d51a2fb2b4cb15 100644
--- a/configs/Colombus_defconfig
+++ b/configs/Colombus_defconfig
@@ -7,13 +7,10 @@ CONFIG_USB1_VBUS_PIN=""
CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31-colombus"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="USB_EHCI,SUNXI_GMAC"
+CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
CONFIG_ETH_DESIGNWARE=y
-CONFIG_DM_SERIAL=y
CONFIG_AXP221_ALDO1_VOLT=3300
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
diff --git a/configs/Cubieboard2_defconfig b/configs/Cubieboard2_defconfig
index 0fbaa23371bdcad2f433ee14ec5dd1a2dd903dad..9bcaed1cfce898cf12e4718b9e5285cdd45200a6 100644
--- a/configs/Cubieboard2_defconfig
+++ b/configs/Cubieboard2_defconfig
@@ -6,12 +6,9 @@ CONFIG_MMC0_CD_PIN="PH1"
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-cubieboard2"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPB(8),USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPB(8)"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
CONFIG_ETH_DESIGNWARE=y
-CONFIG_DM_SERIAL=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
diff --git a/configs/Cubieboard_defconfig b/configs/Cubieboard_defconfig
index 0d0051e0d525c5372992c8f4901bbe5d87c63429..fa60ddf415f2488edd500df195121cd8a4522b14 100644
--- a/configs/Cubieboard_defconfig
+++ b/configs/Cubieboard_defconfig
@@ -5,11 +5,8 @@ CONFIG_DRAM_CLK=480
CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-cubieboard"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC,AHCI,SATAPWR=SUNXI_GPB(8),USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC,AHCI,SATAPWR=SUNXI_GPB(8)"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
-CONFIG_DM_SERIAL=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
diff --git a/configs/Cubietruck_defconfig b/configs/Cubietruck_defconfig
index 57a38477e66758ab7513c90ab37e26d3e6ce067c..b8809c806b3f842974ac58532eb43dc9cf15c9a7 100644
--- a/configs/Cubietruck_defconfig
+++ b/configs/Cubietruck_defconfig
@@ -7,12 +7,9 @@ CONFIG_GMAC_TX_DELAY=1
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-cubietruck"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPH(12),USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPH(12)"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
CONFIG_ETH_DESIGNWARE=y
-CONFIG_DM_SERIAL=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
diff --git a/configs/Et_q8_v1_6_defconfig b/configs/Et_q8_v1_6_defconfig
index e36895c2d51477331f818d5d9ccd81f198b55da1..278334710fa34aaac9e6560472a30bb0a83e9490 100644
--- a/configs/Et_q8_v1_6_defconfig
+++ b/configs/Et_q8_v1_6_defconfig
@@ -19,7 +19,5 @@ CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
-CONFIG_DM_SERIAL=y
CONFIG_AXP221_DLDO1_VOLT=3300
CONFIG_AXP221_ALDO1_VOLT=3000
diff --git a/configs/Hummingbird_A31_defconfig b/configs/Hummingbird_A31_defconfig
index 02c657a8779db12b341ed98177cefd92f407fea9..35c746c96860d413cdebc2355dbf929fed8df201 100644
--- a/configs/Hummingbird_A31_defconfig
+++ b/configs/Hummingbird_A31_defconfig
@@ -9,13 +9,10 @@ CONFIG_VIDEO_VGA_EXTERNAL_DAC_EN="PH25"
CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31-hummingbird"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="USB_EHCI,SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPA(21)"
+CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPA(21)"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
CONFIG_ETH_DESIGNWARE=y
-CONFIG_DM_SERIAL=y
CONFIG_AXP221_ALDO1_VOLT=3300
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
diff --git a/configs/Hyundai_A7HD_defconfig b/configs/Hyundai_A7HD_defconfig
index 7800fa2a162357f1c53283bde48309858f4a41cb..06fdd2a62a5285fdf1c928bc5753abc2b0f1de17 100644
--- a/configs/Hyundai_A7HD_defconfig
+++ b/configs/Hyundai_A7HD_defconfig
@@ -20,5 +20,3 @@ CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
-CONFIG_DM_SERIAL=y
diff --git a/configs/Ippo_q8h_v1_2_a33_1024x600_defconfig b/configs/Ippo_q8h_v1_2_a33_1024x600_defconfig
index 8e26f375984e2da7233ed72bc6a299a3144bfe83..fda7683a7b8b0ed35518fdb213214a0734ec86ca 100644
--- a/configs/Ippo_q8h_v1_2_a33_1024x600_defconfig
+++ b/configs/Ippo_q8h_v1_2_a33_1024x600_defconfig
@@ -5,6 +5,7 @@ CONFIG_DRAM_CLK=480
CONFIG_DRAM_ZQ=15291
CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE"
CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT"
+CONFIG_USB0_ID_DET="PH8"
CONFIG_AXP_GPIO=y
CONFIG_VIDEO_LCD_MODE="x:1024,y:600,depth:18,pclk_khz:51000,le:159,ri:160,up:22,lo:12,hs:1,vs:1,sync:3,vmode:0"
CONFIG_VIDEO_LCD_DCLK_PHASE=0
@@ -19,7 +20,5 @@ CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
-CONFIG_DM_SERIAL=y
CONFIG_AXP221_DLDO1_VOLT=3300
CONFIG_AXP221_ALDO1_VOLT=3000
diff --git a/configs/Ippo_q8h_v1_2_defconfig b/configs/Ippo_q8h_v1_2_defconfig
index ab622106d5114a02a7a0923111a5bad40312cf42..490cbe2be8e2c2cf7b37da16a43ddea45007de8b 100644
--- a/configs/Ippo_q8h_v1_2_defconfig
+++ b/configs/Ippo_q8h_v1_2_defconfig
@@ -5,6 +5,7 @@ CONFIG_DRAM_CLK=432
CONFIG_DRAM_ZQ=63306
CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE"
CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT"
+CONFIG_USB0_ID_DET="PH8"
CONFIG_AXP_GPIO=y
CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:18,pclk_khz:33000,le:87,ri:167,up:31,lo:13,hs:1,vs:1,sync:3,vmode:0"
CONFIG_VIDEO_LCD_DCLK_PHASE=0
@@ -19,7 +20,5 @@ CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
-CONFIG_DM_SERIAL=y
CONFIG_AXP221_DLDO1_VOLT=3300
CONFIG_AXP221_ALDO1_VOLT=3000
diff --git a/configs/Ippo_q8h_v5_defconfig b/configs/Ippo_q8h_v5_defconfig
index 312a38ca18ede9e9865b7697cb6f47c35b9aa449..aa1eb691e70f14198d5b55a487e6a0d25356f00b 100644
--- a/configs/Ippo_q8h_v5_defconfig
+++ b/configs/Ippo_q8h_v5_defconfig
@@ -5,6 +5,7 @@ CONFIG_DRAM_CLK=480
CONFIG_DRAM_ZQ=63351
CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE"
CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT"
+CONFIG_USB0_ID_DET="PH8"
CONFIG_AXP_GPIO=y
CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:18,pclk_khz:33000,le:87,ri:168,up:31,lo:13,hs:1,vs:1,sync:3,vmode:0"
CONFIG_VIDEO_LCD_DCLK_PHASE=0
@@ -19,7 +20,5 @@ CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
-CONFIG_DM_SERIAL=y
CONFIG_AXP221_DLDO1_VOLT=3300
CONFIG_AXP221_ALDO1_VOLT=3000
diff --git a/configs/Linksprite_pcDuino3_Nano_defconfig b/configs/Linksprite_pcDuino3_Nano_defconfig
index 04ec7ab07095b3578ac95985a046e0ca6e2c713b..0b64b60c3cf49ba7fb262d6c8c48dc2bd8734481 100644
--- a/configs/Linksprite_pcDuino3_Nano_defconfig
+++ b/configs/Linksprite_pcDuino3_Nano_defconfig
@@ -8,12 +8,9 @@ CONFIG_GMAC_TX_DELAY=3
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-pcduino3-nano"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPH(2),USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPH(2)"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
CONFIG_ETH_DESIGNWARE=y
-CONFIG_DM_SERIAL=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
diff --git a/configs/Linksprite_pcDuino3_defconfig b/configs/Linksprite_pcDuino3_defconfig
index 6d7690d650deee50478b2d43a5cddae4f8e1809e..cced0323054938275692321364cb403e1f2dd683 100644
--- a/configs/Linksprite_pcDuino3_defconfig
+++ b/configs/Linksprite_pcDuino3_defconfig
@@ -6,12 +6,9 @@ CONFIG_DRAM_ZQ=122
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-pcduino3"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPH(2),USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPH(2)"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
CONFIG_ETH_DESIGNWARE=y
-CONFIG_DM_SERIAL=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
diff --git a/configs/Linksprite_pcDuino_defconfig b/configs/Linksprite_pcDuino_defconfig
index ddd162fe15a5c0ffb55108dafcf02e3c086c29db..de448908ec8ef2ef7bcff032088c8db31376d50d 100644
--- a/configs/Linksprite_pcDuino_defconfig
+++ b/configs/Linksprite_pcDuino_defconfig
@@ -5,11 +5,8 @@ CONFIG_DRAM_CLK=408
CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-pcduino"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC,USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
-CONFIG_DM_SERIAL=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
diff --git a/configs/MK808C_defconfig b/configs/MK808C_defconfig
index a6db139f8b7acb010189f441f4d64c7fdd136bc7..5e374852ed0c9834631363888e9155cbd4ac74aa 100644
--- a/configs/MK808C_defconfig
+++ b/configs/MK808C_defconfig
@@ -5,11 +5,8 @@ CONFIG_DRAM_CLK=384
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-mk808c"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
-CONFIG_DM_SERIAL=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
diff --git a/configs/MSI_Primo73_defconfig b/configs/MSI_Primo73_defconfig
index 6e0d24658ca9f539322bc7f73741479e3801f2ca..7e835367d6383284f10efafac81e26311fb08b85 100644
--- a/configs/MSI_Primo73_defconfig
+++ b/configs/MSI_Primo73_defconfig
@@ -15,7 +15,3 @@ CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
-CONFIG_DM_SERIAL=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
diff --git a/configs/MSI_Primo81_defconfig b/configs/MSI_Primo81_defconfig
index 9787e34ba248f34a1b390423e12e66246b74d87d..b3b21cbd462eb847fb7dadd90d2e43f927acc4fb 100644
--- a/configs/MSI_Primo81_defconfig
+++ b/configs/MSI_Primo81_defconfig
@@ -18,8 +18,6 @@ CONFIG_SPL=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
-CONFIG_DM_SERIAL=y
CONFIG_AXP221_DLDO1_VOLT=3300
CONFIG_VIDEO_LCD_SSD2828_TX_CLK=27
CONFIG_VIDEO_LCD_SSD2828_RESET="PA26"
@@ -27,4 +25,3 @@ CONFIG_VIDEO_LCD_SPI_CS="PH9"
CONFIG_VIDEO_LCD_SPI_SCLK="PH10"
CONFIG_VIDEO_LCD_SPI_MOSI="PH11"
CONFIG_VIDEO_LCD_SPI_MISO="PH12"
-CONFIG_USB=y
diff --git a/configs/Marsboard_A10_defconfig b/configs/Marsboard_A10_defconfig
index ed41af6b81388ce678d4edcd4c5aaa6b87dd4739..493365916da210f32a60b6fa7ce4e1afec065c7b 100644
--- a/configs/Marsboard_A10_defconfig
+++ b/configs/Marsboard_A10_defconfig
@@ -4,11 +4,8 @@ CONFIG_MACH_SUN4I=y
CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-marsboard"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="SUNXI_EMAC,AHCI,USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="SUNXI_EMAC,AHCI"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
-CONFIG_DM_SERIAL=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
diff --git a/configs/Mele_A1000G_quad_defconfig b/configs/Mele_A1000G_quad_defconfig
index 6e0a4935fedb82c481a13ef5b041d8f076de785e..ffc8d9b7bd29a1e0c047f656bd8010d67076fa31 100644
--- a/configs/Mele_A1000G_quad_defconfig
+++ b/configs/Mele_A1000G_quad_defconfig
@@ -7,16 +7,14 @@ CONFIG_USB2_VBUS_PIN=""
CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31-mele-a1000g-quad"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="USB_EHCI,SUNXI_GMAC"
+CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
CONFIG_ETH_DESIGNWARE=y
-CONFIG_DM_SERIAL=y
CONFIG_AXP221_DCDC1_VOLT=3300
CONFIG_AXP221_DLDO1_VOLT=3300
CONFIG_AXP221_DLDO4_VOLT=3300
CONFIG_AXP221_ALDO1_VOLT=3300
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_MUSB_SUNXI=y
diff --git a/configs/Mele_A1000_defconfig b/configs/Mele_A1000_defconfig
index 983ffdc7255839e88985c93418a83734f01d9820..5e66d438ab35599a7cc5889a01395b6a51cd28df 100644
--- a/configs/Mele_A1000_defconfig
+++ b/configs/Mele_A1000_defconfig
@@ -5,11 +5,8 @@ CONFIG_VIDEO_VGA=y
CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-a1000"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC,MACPWR=SUNXI_GPH(15),AHCI,USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC,MACPWR=SUNXI_GPH(15),AHCI"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
-CONFIG_DM_SERIAL=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
diff --git a/configs/Mele_I7_defconfig b/configs/Mele_I7_defconfig
index 7f083a7504a415a8b18568a42792051228fe2d5f..774a92f3810034f726307fbe1b6197fbec5c3313 100644
--- a/configs/Mele_I7_defconfig
+++ b/configs/Mele_I7_defconfig
@@ -7,16 +7,13 @@ CONFIG_USB2_VBUS_PIN=""
CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31-i7"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="USB_EHCI,SUNXI_GMAC"
+CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
CONFIG_ETH_DESIGNWARE=y
-CONFIG_DM_SERIAL=y
CONFIG_AXP221_DCDC1_VOLT=3300
CONFIG_AXP221_DLDO1_VOLT=3300
CONFIG_AXP221_DLDO4_VOLT=3300
CONFIG_AXP221_ALDO1_VOLT=3300
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
diff --git a/configs/Mele_M3_defconfig b/configs/Mele_M3_defconfig
index 73d87c3787e99c85428f498bcac609af343c36de..d49826982f750bf9ed4360a1885f47a6d38c5de1 100644
--- a/configs/Mele_M3_defconfig
+++ b/configs/Mele_M3_defconfig
@@ -8,12 +8,9 @@ CONFIG_VIDEO_VGA=y
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-m3"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
CONFIG_ETH_DESIGNWARE=y
-CONFIG_DM_SERIAL=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
diff --git a/configs/Mele_M5_defconfig b/configs/Mele_M5_defconfig
index 79c59018019cdf6635c9ab33a584c05953891a3b..40f5daaaed7b73ca5b9aa0a6f9f2954864cb0101 100644
--- a/configs/Mele_M5_defconfig
+++ b/configs/Mele_M5_defconfig
@@ -7,12 +7,9 @@ CONFIG_MMC0_CD_PIN="PH1"
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-m5"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,AHCI,USB_EHCI,STATUSLED=234"
+CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,AHCI,STATUSLED=234"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
CONFIG_ETH_DESIGNWARE=y
-CONFIG_DM_SERIAL=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
diff --git a/configs/Mele_M9_defconfig b/configs/Mele_M9_defconfig
index e017ad78d5217300e20bcabce753bb5d4962eefc..b52e3c20abff4d019f4719b727ab3720221a229b 100644
--- a/configs/Mele_M9_defconfig
+++ b/configs/Mele_M9_defconfig
@@ -7,16 +7,13 @@ CONFIG_USB2_VBUS_PIN=""
CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31-m9"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="USB_EHCI,SUNXI_GMAC"
+CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
CONFIG_ETH_DESIGNWARE=y
-CONFIG_DM_SERIAL=y
CONFIG_AXP221_DCDC1_VOLT=3300
CONFIG_AXP221_DLDO1_VOLT=3300
CONFIG_AXP221_DLDO4_VOLT=3300
CONFIG_AXP221_ALDO1_VOLT=3300
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
diff --git a/configs/Merrii_A80_Optimus_defconfig b/configs/Merrii_A80_Optimus_defconfig
index b02b1a34c81fae6afd8d9ab4e1234cd166d0c1e9..8587bc8e7c63eee0a8f55c5e36af3ac54e0f60f4 100644
--- a/configs/Merrii_A80_Optimus_defconfig
+++ b/configs/Merrii_A80_Optimus_defconfig
@@ -12,7 +12,3 @@ CONFIG_DEFAULT_DEVICE_TREE="sun9i-a80-optimus"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
-CONFIG_DM_SERIAL=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
diff --git a/configs/Mini-X_defconfig b/configs/Mini-X_defconfig
index da5771113456d0365de93093c8b6cbb6e01fe595..c721c8774226bb293887673ac4ab2f313e3b08c9 100644
--- a/configs/Mini-X_defconfig
+++ b/configs/Mini-X_defconfig
@@ -4,11 +4,10 @@ CONFIG_MACH_SUN4I=y
CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-mini-xplus"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
-CONFIG_DM_SERIAL=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_MUSB_SUNXI=y
+CONFIG_USB0_VBUS_PIN="PB9"
diff --git a/configs/Orangepi_defconfig b/configs/Orangepi_defconfig
index ba89a25a2a55db822d6235b97a1d1c79b9fdf512..f9408b1fdfe55df9fcdf64b5ea3a791d53408aeb 100644
--- a/configs/Orangepi_defconfig
+++ b/configs/Orangepi_defconfig
@@ -9,12 +9,9 @@ CONFIG_GMAC_TX_DELAY=3
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-orangepi"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHCI,USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHCI"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
CONFIG_ETH_DESIGNWARE=y
-CONFIG_DM_SERIAL=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
diff --git a/configs/Orangepi_mini_defconfig b/configs/Orangepi_mini_defconfig
index 8f03815d912419727269cd2d11097672ef58a247..1dc0e767885316f6673d0f8eba4077c15146982d 100644
--- a/configs/Orangepi_mini_defconfig
+++ b/configs/Orangepi_mini_defconfig
@@ -11,12 +11,9 @@ CONFIG_GMAC_TX_DELAY=3
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-orangepi-mini"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHCI,USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHCI"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
CONFIG_ETH_DESIGNWARE=y
-CONFIG_DM_SERIAL=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
diff --git a/configs/Sinlinx_SinA33_defconfig b/configs/Sinlinx_SinA33_defconfig
index e9e62da101d5ccb34cda6ba99f18ee2ce0577627..720f3dc2d5e7e67ffbcec14b2bc0a5d091ad286e 100644
--- a/configs/Sinlinx_SinA33_defconfig
+++ b/configs/Sinlinx_SinA33_defconfig
@@ -9,8 +9,4 @@ CONFIG_SPL=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
-CONFIG_DM_SERIAL=y
CONFIG_AXP221_ALDO1_VOLT=3000
-CONFIG_USB=y
-CONFIG_DM_USB=y
diff --git a/configs/TZX-Q8-713B7_defconfig b/configs/TZX-Q8-713B7_defconfig
index 68961fc54e7e499a934083de1a1da3fd6196c212..6a716bd1a820ac0d71db62e5dbacff845eff27aa 100644
--- a/configs/TZX-Q8-713B7_defconfig
+++ b/configs/TZX-Q8-713B7_defconfig
@@ -18,5 +18,3 @@ CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2,AXP209_POWER"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
-CONFIG_DM_SERIAL=y
diff --git a/configs/UTOO_P66_defconfig b/configs/UTOO_P66_defconfig
index c3b13b7beeeee417fc026ce6184ada73007aa499..d59a0448eb4ee7163b7b17842a1dbe9ace36720a 100644
--- a/configs/UTOO_P66_defconfig
+++ b/configs/UTOO_P66_defconfig
@@ -23,4 +23,4 @@ CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
+# CONFIG_REQUIRE_SERIAL_CONSOLE is not set
diff --git a/configs/Wexler_TAB7200_defconfig b/configs/Wexler_TAB7200_defconfig
index d9180c7fe5a8df102f6adcaf3488daf491325ce3..eadceb2757d70f4e40b4ef9a44527e0398caefe2 100644
--- a/configs/Wexler_TAB7200_defconfig
+++ b/configs/Wexler_TAB7200_defconfig
@@ -9,11 +9,8 @@ CONFIG_VIDEO_LCD_BL_PWM="PB2"
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-wexler-tab7200"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
-CONFIG_DM_SERIAL=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
diff --git a/configs/Wits_Pro_A20_DKT_defconfig b/configs/Wits_Pro_A20_DKT_defconfig
index bb8dd29937f5ed47f43e47b65e9da685e192207c..66b51bca7cf55f4029ad8c02ed40d62ded76a06c 100644
--- a/configs/Wits_Pro_A20_DKT_defconfig
+++ b/configs/Wits_Pro_A20_DKT_defconfig
@@ -11,12 +11,9 @@ CONFIG_VIDEO_LCD_PANEL_LVDS=y
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-wits-pro-a20-dkt"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,AHCI,USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,AHCI"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
CONFIG_ETH_DESIGNWARE=y
-CONFIG_DM_SERIAL=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
diff --git a/configs/Yones_Toptech_BD1078_defconfig b/configs/Yones_Toptech_BD1078_defconfig
index aab580e05e03a6c6cb6544f4656413467e8c72d7..22b51a25951ed7041594c00a9b0c573b4b1e2c16 100644
--- a/configs/Yones_Toptech_BD1078_defconfig
+++ b/configs/Yones_Toptech_BD1078_defconfig
@@ -24,5 +24,3 @@ CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
-CONFIG_DM_SERIAL=y
diff --git a/configs/ba10_tv_box_defconfig b/configs/ba10_tv_box_defconfig
index c84e82eae96ddf79dddac04acd701df9856ee7ca..ae302c544e4770322d21dfcef7a79a96da29006c 100644
--- a/configs/ba10_tv_box_defconfig
+++ b/configs/ba10_tv_box_defconfig
@@ -7,11 +7,10 @@ CONFIG_USB2_VBUS_PIN="PH12"
CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-ba10-tvbox"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC,USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
-CONFIG_DM_SERIAL=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_MUSB_SUNXI=y
+CONFIG_USB0_VBUS_PIN="PB9"
diff --git a/configs/forfun_q88db_defconfig b/configs/forfun_q88db_defconfig
index 85c807a9fa643daa6e83d68b8a9e2c38e20beba4..8f10c25b16ca66a33e27a6e9446cd10405ccb271 100644
--- a/configs/forfun_q88db_defconfig
+++ b/configs/forfun_q88db_defconfig
@@ -17,5 +17,3 @@ CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
-CONFIG_DM_SERIAL=y
diff --git a/configs/ga10h_v1_1_defconfig b/configs/ga10h_v1_1_defconfig
index 315627d090390bb2bf26e9cc44361bc549ae2477..e766db4f6fd673913ab9cbc10b798137e147bda4 100644
--- a/configs/ga10h_v1_1_defconfig
+++ b/configs/ga10h_v1_1_defconfig
@@ -6,6 +6,7 @@ CONFIG_DRAM_ZQ=15291
CONFIG_DRAM_ODT_EN=y
CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE"
CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT"
+CONFIG_USB0_ID_DET="PH8"
CONFIG_AXP_GPIO=y
CONFIG_VIDEO_LCD_MODE="x:1024,y:600,depth:18,pclk_khz:52000,le:138,ri:162,up:22,lo:10,hs:20,vs:3,sync:3,vmode:0"
CONFIG_VIDEO_LCD_DCLK_PHASE=0
@@ -21,7 +22,6 @@ CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
-CONFIG_DM_SERIAL=y
CONFIG_AXP221_DLDO1_VOLT=3300
CONFIG_AXP221_ALDO1_VOLT=3000
+CONFIG_USB_EHCI_HCD=y
diff --git a/configs/i12-tvbox_defconfig b/configs/i12-tvbox_defconfig
index 3a69422480e952a0bef01a9c2cd4bea223007822..99e78ba0905365f02d205302b177218171f34a79 100644
--- a/configs/i12-tvbox_defconfig
+++ b/configs/i12-tvbox_defconfig
@@ -5,12 +5,9 @@ CONFIG_DRAM_CLK=384
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-i12-tvbox"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,MACPWR=SUNXI_GPH(21),USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,MACPWR=SUNXI_GPH(21)"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
CONFIG_ETH_DESIGNWARE=y
-CONFIG_DM_SERIAL=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
diff --git a/configs/iNet_3F_defconfig b/configs/iNet_3F_defconfig
index 54de300aa8973ae448d7ffffa954d50a2447b2d6..c4611cff4c9b4d49172ed4b70fbf821a77ba735d 100644
--- a/configs/iNet_3F_defconfig
+++ b/configs/iNet_3F_defconfig
@@ -19,5 +19,3 @@ CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
-CONFIG_DM_SERIAL=y
diff --git a/configs/iNet_3W_defconfig b/configs/iNet_3W_defconfig
index e1beac88c19a91cd2471f735de9ac9cfeeb6f780..d75eb218601caae3a168a54318664a05751f758a 100644
--- a/configs/iNet_3W_defconfig
+++ b/configs/iNet_3W_defconfig
@@ -19,5 +19,3 @@ CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
-CONFIG_DM_SERIAL=y
diff --git a/configs/iNet_86VS_defconfig b/configs/iNet_86VS_defconfig
index 627e2110af4f40e2106f19dc9e3a20ccab465098..b9f2066d1e7714545eed982fadc714fd4c704284 100644
--- a/configs/iNet_86VS_defconfig
+++ b/configs/iNet_86VS_defconfig
@@ -17,5 +17,3 @@ CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
-CONFIG_DM_SERIAL=y
diff --git a/configs/jesurun_q5_defconfig b/configs/jesurun_q5_defconfig
index 4b09a3350225aefe379ea3afc2421e97db42d32f..a2115b6d390fbb4f39269f3383e0edaf0b698e16 100644
--- a/configs/jesurun_q5_defconfig
+++ b/configs/jesurun_q5_defconfig
@@ -5,11 +5,8 @@ CONFIG_DRAM_CLK=312
CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-jesurun-q5"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC,USB_EHCI,MACPWR=SUNXI_GPH(19)"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC,MACPWR=SUNXI_GPH(19)"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
-CONFIG_DM_SERIAL=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
diff --git a/configs/mixtile_loftq_defconfig b/configs/mixtile_loftq_defconfig
index a8c497cf5e6e862dfeeee9c5982a5f49add1d526..26fc4ce610d13083c439efc257484252e21f5590 100644
--- a/configs/mixtile_loftq_defconfig
+++ b/configs/mixtile_loftq_defconfig
@@ -8,13 +8,10 @@ CONFIG_USB2_VBUS_PIN=""
CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31-mixtile-loftq"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="USB_EHCI,SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPA(21)"
+CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPA(21)"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
CONFIG_ETH_DESIGNWARE=y
-CONFIG_DM_SERIAL=y
CONFIG_AXP221_ALDO1_VOLT=3300
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
diff --git a/configs/mk802_a10s_defconfig b/configs/mk802_a10s_defconfig
index dc78fa43d117a0feb9a4626161a78767bfef3230..db437f08da25879ba60c5da18bcde92b18c0aa98 100644
--- a/configs/mk802_a10s_defconfig
+++ b/configs/mk802_a10s_defconfig
@@ -7,11 +7,8 @@ CONFIG_USB1_VBUS_PIN="PB10"
CONFIG_DEFAULT_DEVICE_TREE="sun5i-a10s-mk802"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="AXP152_POWER,USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP152_POWER"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
-CONFIG_DM_SERIAL=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
diff --git a/configs/mk802_defconfig b/configs/mk802_defconfig
index 31bde005a08c9d7defd06935da3fcfea8a783535..68b2c5e37c44c85b20b89db480153f0fe5e65b42 100644
--- a/configs/mk802_defconfig
+++ b/configs/mk802_defconfig
@@ -9,7 +9,4 @@ CONFIG_SYS_EXTRA_OPTIONS="USB_EHCI"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
-CONFIG_DM_SERIAL=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
diff --git a/configs/mk802ii_defconfig b/configs/mk802ii_defconfig
index ffa78910fc0422a339f404316b2689dbda462075..d3cb664f8ab4ee019a1e55a56b23ebb6b8b4a04a 100644
--- a/configs/mk802ii_defconfig
+++ b/configs/mk802ii_defconfig
@@ -4,11 +4,8 @@ CONFIG_MACH_SUN4I=y
CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-mk802ii"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
-CONFIG_DM_SERIAL=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
diff --git a/configs/r7-tv-dongle_defconfig b/configs/r7-tv-dongle_defconfig
index ac7928dbf13677bbd45ce26465ceb53856557f45..62c58fc3333021adc541c612e8d95a809be853e1 100644
--- a/configs/r7-tv-dongle_defconfig
+++ b/configs/r7-tv-dongle_defconfig
@@ -6,11 +6,8 @@ CONFIG_USB1_VBUS_PIN="PG13"
CONFIG_DEFAULT_DEVICE_TREE="sun5i-a10s-r7-tv-dongle"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="AXP152_POWER,USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP152_POWER"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
-CONFIG_DM_SERIAL=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
diff --git a/configs/sunxi_Gemei_G9_defconfig b/configs/sunxi_Gemei_G9_defconfig
index e95cbe4f764c39abdab73c3a7983511044386e5a..d0f987c72eb788a204fa4f1c0ce2a8301179f8b7 100644
--- a/configs/sunxi_Gemei_G9_defconfig
+++ b/configs/sunxi_Gemei_G9_defconfig
@@ -11,11 +11,8 @@ CONFIG_VIDEO_LCD_PANEL_LVDS=y
CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-gemei-g9"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
-CONFIG_DM_SERIAL=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c
index da47037a3066260a5596d35c1cf033f7102c2afe..f12546ac51925a9e249ffb1a8fbdf8cd6f91ea04 100644
--- a/drivers/mmc/mmc.c
+++ b/drivers/mmc/mmc.c
@@ -1762,6 +1762,11 @@ static void do_preinit(void)
int mmc_initialize(bd_t *bis)
{
+ static int initialized = 0;
+ if (initialized) /* Avoid initializing mmc multiple times */
+ return 0;
+ initialized = 1;
+
INIT_LIST_HEAD (&mmc_devices);
cur_dev_num = 0;
diff --git a/drivers/mmc/sunxi_mmc.c b/drivers/mmc/sunxi_mmc.c
index e7ab828a8f1e1f5df54088e8d9d52e0d1c1b1889..f9b9493c892152dcdc958cb5da65feb46191dace 100644
--- a/drivers/mmc/sunxi_mmc.c
+++ b/drivers/mmc/sunxi_mmc.c
@@ -433,6 +433,23 @@ static int sunxi_mmc_getcd(struct mmc *mmc)
return !gpio_get_value(cd_pin);
}
+int sunxi_mmc_has_egon_boot_signature(struct mmc *mmc)
+{
+ char *buf = malloc(512);
+ int valid_signature = 0;
+
+ if (buf == NULL)
+ panic("Failed to allocate memory\n");
+
+ if (mmc_getcd(mmc) && mmc_init(mmc) == 0 &&
+ mmc->block_dev.block_read(mmc->block_dev.dev, 16, 1, buf) == 1 &&
+ strncmp(&buf[4], "eGON.BT0", 8) == 0)
+ valid_signature = 1;
+
+ free(buf);
+ return valid_signature;
+}
+
static const struct mmc_ops sunxi_mmc_ops = {
.send_cmd = sunxi_mmc_send_cmd,
.set_ios = sunxi_mmc_set_ios,
diff --git a/drivers/usb/musb-new/sunxi.c b/drivers/usb/musb-new/sunxi.c
index c123d61af2c3d274b76d7395b9e4460b257624ec..3a29b18e5f4cde07505975938d75edafe462b7c5 100644
--- a/drivers/usb/musb-new/sunxi.c
+++ b/drivers/usb/musb-new/sunxi.c
@@ -26,17 +26,12 @@
#include <asm/arch/gpio.h>
#include <asm/arch/usb_phy.h>
#include <asm-generic/gpio.h>
+#include <dm/lists.h>
+#include <dm/root.h>
+#include <linux/usb/musb.h>
#include "linux-compat.h"
#include "musb_core.h"
-#ifdef CONFIG_AXP152_POWER
-#include <axp152.h>
-#endif
-#ifdef CONFIG_AXP209_POWER
-#include <axp209.h>
-#endif
-#ifdef CONFIG_AXP221_POWER
-#include <axp221.h>
-#endif
+#include "musb_uboot.h"
/******************************************************************************
******************************************************************************
@@ -201,6 +196,8 @@ static bool enabled = false;
static int sunxi_musb_enable(struct musb *musb)
{
+ int ret;
+
pr_debug("%s():\n", __func__);
if (enabled)
@@ -209,8 +206,19 @@ static int sunxi_musb_enable(struct musb *musb)
/* select PIO mode */
musb_writeb(musb->mregs, USBC_REG_o_VEND0, 0);
- if (is_host_enabled(musb))
+ if (is_host_enabled(musb)) {
+ ret = sunxi_usb_phy_vbus_detect(0);
+ if (ret == 1) {
+ printf("A charger is plugged into the OTG: ");
+ return -ENODEV;
+ }
+ ret = sunxi_usb_phy_id_detect(0);
+ if (ret == 1) {
+ printf("No host cable detected: ");
+ return -ENODEV;
+ }
sunxi_usb_phy_power_on(0); /* port power on */
+ }
USBC_ForceVbusValidToHigh(musb->mregs);
@@ -237,18 +245,9 @@ static void sunxi_musb_disable(struct musb *musb)
static int sunxi_musb_init(struct musb *musb)
{
struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
- int err;
pr_debug("%s():\n", __func__);
- if (is_host_enabled(musb)) {
- err = sunxi_usb_phy_vbus_detect(0);
- if (err) {
- eprintf("Error: A charger is plugged into the OTG\n");
- return -EIO;
- }
- }
-
musb->isr = sunxi_musb_interrupt;
setbits_le32(&ccm->ahb_gate0, 1 << AHB_GATE_OFFSET_USB0);
@@ -273,8 +272,86 @@ static int sunxi_musb_init(struct musb *musb)
return 0;
}
-const struct musb_platform_ops sunxi_musb_ops = {
+static const struct musb_platform_ops sunxi_musb_ops = {
.init = sunxi_musb_init,
.enable = sunxi_musb_enable,
.disable = sunxi_musb_disable,
};
+
+static struct musb_hdrc_config musb_config = {
+ .multipoint = 1,
+ .dyn_fifo = 1,
+ .num_eps = 6,
+ .ram_bits = 11,
+};
+
+static struct musb_hdrc_platform_data musb_plat = {
+#if defined(CONFIG_MUSB_HOST)
+ .mode = MUSB_HOST,
+#else
+ .mode = MUSB_PERIPHERAL,
+#endif
+ .config = &musb_config,
+ .power = 250,
+ .platform_ops = &sunxi_musb_ops,
+};
+
+#ifdef CONFIG_MUSB_HOST
+int musb_usb_probe(struct udevice *dev)
+{
+ struct musb_host_data *host = dev_get_priv(dev);
+ struct usb_bus_priv *priv = dev_get_uclass_priv(dev);
+ int ret;
+
+ priv->desc_before_addr = true;
+
+ if (!host->host) {
+ host->host = musb_init_controller(&musb_plat, NULL,
+ (void *)SUNXI_USB0_BASE);
+ if (!host->host)
+ return -EIO;
+ }
+
+ ret = musb_lowlevel_init(host);
+ if (ret == 0)
+ printf("MUSB OTG\n");
+
+ return ret;
+}
+
+int musb_usb_remove(struct udevice *dev)
+{
+ struct musb_host_data *host = dev_get_priv(dev);
+
+ musb_stop(host->host);
+
+ return 0;
+}
+
+U_BOOT_DRIVER(usb_musb) = {
+ .name = "sunxi-musb",
+ .id = UCLASS_USB,
+ .probe = musb_usb_probe,
+ .remove = musb_usb_remove,
+ .ops = &musb_usb_ops,
+ .platdata_auto_alloc_size = sizeof(struct usb_platdata),
+ .priv_auto_alloc_size = sizeof(struct musb_host_data),
+};
+#endif
+
+void sunxi_musb_board_init(void)
+{
+#ifdef CONFIG_MUSB_HOST
+ struct udevice *dev;
+
+ /*
+ * Bind the driver directly for now as musb linux kernel support is
+ * still pending upstream so our dts files do not have the necessary
+ * nodes yet. TODO: Remove this as soon as the dts nodes are in place
+ * and bind by compatible instead.
+ */
+ device_bind_driver(dm_root(), "sunxi-musb", "sunxi-musb", &dev);
+#else
+ musb_register(&musb_plat, NULL, (void *)SUNXI_USB0_BASE);
+#endif
+}
diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h
index 9576bc1a20c1b2196618e46fd930c9e7ea02e117..5adcc39e02a9360890c3e8434260080064c674c5 100644
--- a/include/configs/sunxi-common.h
+++ b/include/configs/sunxi-common.h
@@ -330,11 +330,6 @@ extern int soft_i2c_gpio_scl;
#define CONFIG_MUSB_PIO_ONLY
#endif
-#if defined CONFIG_USB_EHCI || defined CONFIG_USB_MUSB_SUNXI
-#define CONFIG_CMD_USB
-#define CONFIG_USB_STORAGE
-#endif
-
#ifdef CONFIG_USB_KEYBOARD
#define CONFIG_CONSOLE_MUX
#define CONFIG_PREBOOT