diff --git a/.mailmap b/.mailmap
index 02dccfc1aee7ff5fd29007bf9daad769da5ea5e4..f72fef1748252774d5bbb640468b025539b9a26e 100644
--- a/.mailmap
+++ b/.mailmap
@@ -21,6 +21,9 @@ Jagan Teki <jagannadha.sutradharudu-teki@xilinx.com>
Markus Klotzbuecher <mk@denx.de>
Prabhakar Kushwaha <prabhakar@freescale.com>
Rajeshwari Shinde <rajeshwari.s@samsung.com>
+Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+Ricardo Ribalda <ricardo.ribalda@uam.es>
+Ricardo Ribalda <ricardo.ribalda@gmail.com>
Sandeep Paulraj <s-paulraj@ti.com>
Shaohui Xie <Shaohui.Xie@freescale.com>
Stefan Roese <stroese>
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 876a620cf197b343ad2fdc27a9864a0bc6ee71ab..d2dbb1a5c27f2db05ed2b5727dbfdcbee80adbfa 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -558,15 +558,15 @@ config ARCH_ZYNQ
select CPU_V7
select SUPPORT_SPL
select OF_CONTROL
- select SPL_OF_CONTROL
+ select SPL_OF_CONTROL if SPL
select DM
select DM_ETH
- select SPL_DM
+ select SPL_DM if SPL
select DM_MMC
select DM_SPI
select DM_SERIAL
select DM_SPI_FLASH
- select SPL_SEPARATE_BSS
+ select SPL_SEPARATE_BSS if SPL
config ARCH_ZYNQMP
bool "Support Xilinx ZynqMP Platform"
diff --git a/arch/arm/cpu/armv8/zynqmp/Kconfig b/arch/arm/cpu/armv8/zynqmp/Kconfig
index e5a4fdd0fda0924f74075b4f4d5dc199601ac457..9a19dfa77f797490af946863d29970404ce509a8 100644
--- a/arch/arm/cpu/armv8/zynqmp/Kconfig
+++ b/arch/arm/cpu/armv8/zynqmp/Kconfig
@@ -20,10 +20,6 @@ config SYS_SOC
config SYS_CONFIG_NAME
default "xilinx_zynqmp_ep" if TARGET_ZYNQMP_EP
-config SECURE_IOU
- bool "Configure ZynqMP secure IOU"
- default n
-
config ZYNQMP_USB
bool "Configure ZynqMP USB"
diff --git a/arch/arm/cpu/armv8/zynqmp/clk.c b/arch/arm/cpu/armv8/zynqmp/clk.c
index 9218586e94a3bf0a26c92af13900856a32144f00..690c72dd66836190a5c709900d1d694d8d5fd02d 100644
--- a/arch/arm/cpu/armv8/zynqmp/clk.c
+++ b/arch/arm/cpu/armv8/zynqmp/clk.c
@@ -21,9 +21,27 @@ unsigned long get_uart_clk(int dev_id)
return 48000;
case ZYNQMP_CSU_VERSION_EP108:
return 25000000;
+ case ZYNQMP_CSU_VERSION_QEMU:
+ return 133000000;
}
- return 133000000;
+ return 100000000;
+}
+
+unsigned long zynqmp_get_system_timer_freq(void)
+{
+ u32 ver = zynqmp_get_silicon_version();
+
+ switch (ver) {
+ case ZYNQMP_CSU_VERSION_VELOCE:
+ return 10000;
+ case ZYNQMP_CSU_VERSION_EP108:
+ return 4000000;
+ case ZYNQMP_CSU_VERSION_QEMU:
+ return 50000000;
+ }
+
+ return 100000000;
}
#ifdef CONFIG_CLOCKS
diff --git a/arch/arm/cpu/armv8/zynqmp/cpu.c b/arch/arm/cpu/armv8/zynqmp/cpu.c
index f90cca36aa72ab0f30d30af16a87bbc6f37bb8d4..c71f29152deed40d1d55683c57ad8db36a940ed7 100644
--- a/arch/arm/cpu/armv8/zynqmp/cpu.c
+++ b/arch/arm/cpu/armv8/zynqmp/cpu.c
@@ -15,8 +15,22 @@
DECLARE_GLOBAL_DATA_PTR;
+static unsigned int zynqmp_get_silicon_version_secure(void)
+{
+ u32 ver;
+
+ ver = readl(&csu_base->version);
+ ver &= ZYNQMP_SILICON_VER_MASK;
+ ver >>= ZYNQMP_SILICON_VER_SHIFT;
+
+ return ver;
+}
+
unsigned int zynqmp_get_silicon_version(void)
{
+ if (current_el() == 3)
+ return zynqmp_get_silicon_version_secure();
+
gd->cpu_clk = get_tbclk();
switch (gd->cpu_clk) {
@@ -24,9 +38,11 @@ unsigned int zynqmp_get_silicon_version(void)
return ZYNQMP_CSU_VERSION_VELOCE;
case 50000000:
return ZYNQMP_CSU_VERSION_QEMU;
+ case 4000000:
+ return ZYNQMP_CSU_VERSION_EP108;
}
- return ZYNQMP_CSU_VERSION_EP108;
+ return ZYNQMP_CSU_VERSION_SILICON;
}
#ifndef CONFIG_SYS_DCACHE_OFF
diff --git a/arch/arm/dts/zynq-7000.dtsi b/arch/arm/dts/zynq-7000.dtsi
index 83be51ae9df65ee8c35d406d58d6dffaf25240b3..2d786f0fd15d0845a9ebd1dbff35208bc53a60dd 100644
--- a/arch/arm/dts/zynq-7000.dtsi
+++ b/arch/arm/dts/zynq-7000.dtsi
@@ -234,7 +234,7 @@
interrupt-parent = <&intc>;
interrupts = <0 24 4>;
reg = <0xe0100000 0x1000>;
- } ;
+ };
sdhci1: sdhci@e0101000 {
compatible = "arasan,sdhci-8.9a";
@@ -244,7 +244,7 @@
interrupt-parent = <&intc>;
interrupts = <0 47 4>;
reg = <0xe0101000 0x1000>;
- } ;
+ };
slcr: slcr@f8000000 {
#address-cells = <1>;
@@ -326,11 +326,11 @@
scutimer: timer@f8f00600 {
interrupt-parent = <&intc>;
- interrupts = < 1 13 0x301 >;
+ interrupts = <1 13 0x301>;
compatible = "arm,cortex-a9-twd-timer";
- reg = < 0xf8f00600 0x20 >;
+ reg = <0xf8f00600 0x20>;
clocks = <&clkc 4>;
- } ;
+ };
usb0: usb@e0002000 {
compatible = "xlnx,zynq-usb-2.20a", "chipidea,usb2";
diff --git a/arch/arm/dts/zynq-zc770-xm010.dts b/arch/arm/dts/zynq-zc770-xm010.dts
index 07e2b7a7387de602fd383d7ab4f0325d9943cdb7..b6982c0c45dae9f3e03f527606476001a594c427 100644
--- a/arch/arm/dts/zynq-zc770-xm010.dts
+++ b/arch/arm/dts/zynq-zc770-xm010.dts
@@ -21,9 +21,8 @@
};
chosen {
- bootargs = "console=ttyPS0,115200 root=/dev/ram rw earlyprintk";
- linux,stdout-path = &uart1;
- stdout-path = &uart1;
+ bootargs = "root=/dev/ram rw earlyprintk";
+ stdout-path = "serial0:115200n8";
};
memory {
diff --git a/arch/arm/dts/zynq-zc770-xm011.dts b/arch/arm/dts/zynq-zc770-xm011.dts
index 77e3bb0e631050aeaeae2cfc07d1a312a983e6fb..4fed2215365cf2d0585cc5d3cb4b5e2e4b9a80c9 100644
--- a/arch/arm/dts/zynq-zc770-xm011.dts
+++ b/arch/arm/dts/zynq-zc770-xm011.dts
@@ -18,9 +18,8 @@
};
chosen {
- bootargs = "console=ttyPS0,115200 root=/dev/ram rw earlyprintk";
- linux,stdout-path = &uart1;
- stdout-path = &uart1;
+ bootargs = "root=/dev/ram rw earlyprintk";
+ stdout-path = "serial0:115200n8";
};
memory {
@@ -34,12 +33,6 @@
};
};
-&spi0 {
- status = "okay";
- num-cs = <4>;
- is-decoded-cs = <0>;
-};
-
&can0 {
status = "okay";
};
@@ -54,6 +47,12 @@
};
};
+&spi0 {
+ status = "okay";
+ num-cs = <4>;
+ is-decoded-cs = <0>;
+};
+
&uart1 {
u-boot,dm-pre-reloc;
status = "okay";
diff --git a/arch/arm/dts/zynq-zc770-xm012.dts b/arch/arm/dts/zynq-zc770-xm012.dts
index 3e1769acb51f994c20a85f9353efc450563560aa..8d69f0e0f5ef4ecaaa1e459b0c8c75b5c9427160 100644
--- a/arch/arm/dts/zynq-zc770-xm012.dts
+++ b/arch/arm/dts/zynq-zc770-xm012.dts
@@ -20,9 +20,8 @@
};
chosen {
- bootargs = "console=ttyPS0,115200 root=/dev/ram rw earlyprintk";
- linux,stdout-path = &uart1;
- stdout-path = &uart1;
+ bootargs = "root=/dev/ram rw earlyprintk";
+ stdout-path = "serial0:115200n8";
};
memory {
@@ -31,12 +30,6 @@
};
};
-&spi1 {
- status = "okay";
- num-cs = <4>;
- is-decoded-cs = <0>;
-};
-
&can1 {
status = "okay";
};
@@ -61,6 +54,12 @@
};
};
+&spi1 {
+ status = "okay";
+ num-cs = <4>;
+ is-decoded-cs = <0>;
+};
+
&uart1 {
u-boot,dm-pre-reloc;
status = "okay";
diff --git a/arch/arm/dts/zynq-zc770-xm013.dts b/arch/arm/dts/zynq-zc770-xm013.dts
index 288e248374795238464c53f15f2ca10f2ebd3d06..77fdfcc00947f1172898be96213aafa683fecee6 100644
--- a/arch/arm/dts/zynq-zc770-xm013.dts
+++ b/arch/arm/dts/zynq-zc770-xm013.dts
@@ -20,9 +20,8 @@
};
chosen {
- bootargs = "console=ttyPS0,115200 root=/dev/ram rw earlyprintk";
- linux,stdout-path = &uart0;
- stdout-path = &uart0;
+ bootargs = "root=/dev/ram rw earlyprintk";
+ stdout-path = "serial0:115200n8";
};
memory {
@@ -31,21 +30,6 @@
};
};
-&spi0 {
- status = "okay";
- num-cs = <4>;
- is-decoded-cs = <0>;
- eeprom: at25@0 {
- at25,byte-len = <8192>;
- at25,addr-mode = <2>;
- at25,page-size = <32>;
-
- compatible = "atmel,at25";
- reg = <2>;
- spi-max-frequency = <1000000>;
- };
-};
-
&can1 {
status = "okay";
};
@@ -74,6 +58,21 @@
};
};
+&spi0 {
+ status = "okay";
+ num-cs = <4>;
+ is-decoded-cs = <0>;
+ eeprom: at25@0 {
+ at25,byte-len = <8192>;
+ at25,addr-mode = <2>;
+ at25,page-size = <32>;
+
+ compatible = "atmel,at25";
+ reg = <2>;
+ spi-max-frequency = <1000000>;
+ };
+};
+
&uart0 {
u-boot,dm-pre-reloc;
status = "okay";
diff --git a/arch/arm/dts/zynqmp-ep108.dts b/arch/arm/dts/zynqmp-ep108.dts
index 4481bd07c9e8debc552499dfc470875297832682..754604ea72519da1a8678183aceba55a0284a128 100644
--- a/arch/arm/dts/zynqmp-ep108.dts
+++ b/arch/arm/dts/zynqmp-ep108.dts
@@ -41,7 +41,7 @@
status = "okay";
phy-handle = <&phy0>;
phy-mode = "rgmii-id";
- phy0: phy@0{
+ phy0: phy@0 {
reg = <0>;
max-speed = <100>;
};
diff --git a/arch/arm/dts/zynqmp.dtsi b/arch/arm/dts/zynqmp.dtsi
index 24a34e6d85d2e5c8ecf1e38a62f89608835a9154..8733604a57384eea27be29c8fac54c3b87a074c0 100644
--- a/arch/arm/dts/zynqmp.dtsi
+++ b/arch/arm/dts/zynqmp.dtsi
@@ -520,7 +520,7 @@
};
uart0: serial@ff000000 {
- compatible = "cdns,uart-r1p8";
+ compatible = "cdns,uart-r1p12";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 21 4>;
@@ -529,7 +529,7 @@
};
uart1: serial@ff010000 {
- compatible = "cdns,uart-r1p8";
+ compatible = "cdns,uart-r1p12";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 22 4>;
@@ -559,7 +559,7 @@
compatible = "cdns,wdt-r1p2";
status = "disabled";
interrupt-parent = <&gic>;
- interrupts = <0 52 1>;
+ interrupts = <0 113 1>;
reg = <0x0 0xfd4d0000 0x1000>;
timeout-sec = <10>;
};
diff --git a/arch/arm/include/asm/arch-zynqmp/clk.h b/arch/arm/include/asm/arch-zynqmp/clk.h
index d55bc31c43993cb7ebbb3fb983e3faecb715b7c7..b18333d1ca25fd29bb13100d58646fe01adb8316 100644
--- a/arch/arm/include/asm/arch-zynqmp/clk.h
+++ b/arch/arm/include/asm/arch-zynqmp/clk.h
@@ -9,5 +9,6 @@
#define _ASM_ARCH_CLK_H_
unsigned long get_uart_clk(int dev_id);
+unsigned long zynqmp_get_system_timer_freq(void);
#endif /* _ASM_ARCH_CLK_H_ */
diff --git a/arch/arm/include/asm/arch-zynqmp/hardware.h b/arch/arm/include/asm/arch-zynqmp/hardware.h
index bbf89d9dd7460cc013d42e3de764eae2a96590c8..587938249e8f7e3cd501463a6bd1c54cf57dc94f 100644
--- a/arch/arm/include/asm/arch-zynqmp/hardware.h
+++ b/arch/arm/include/asm/arch-zynqmp/hardware.h
@@ -41,11 +41,8 @@ struct crlapb_regs {
#define crlapb_base ((struct crlapb_regs *)ZYNQMP_CRL_APB_BASEADDR)
-#if defined(CONFIG_SECURE_IOU)
-#define ZYNQMP_IOU_SCNTR 0xFF260000
-#else
+#define ZYNQMP_IOU_SCNTR_SECURE 0xFF260000
#define ZYNQMP_IOU_SCNTR 0xFF250000
-#endif
#define ZYNQMP_IOU_SCNTR_COUNTER_CONTROL_REGISTER_EN 0x1
#define ZYNQMP_IOU_SCNTR_COUNTER_CONTROL_REGISTER_HDBG 0x2
@@ -57,9 +54,21 @@ struct iou_scntr {
#define iou_scntr ((struct iou_scntr *)ZYNQMP_IOU_SCNTR)
+struct iou_scntr_secure {
+ u32 counter_control_register;
+ u32 reserved0[7];
+ u32 base_frequency_id_register;
+};
+
+#define iou_scntr_secure ((struct iou_scntr_secure *)ZYNQMP_IOU_SCNTR_SECURE)
+
/* Bootmode setting values */
#define BOOT_MODES_MASK 0x0000000F
-#define SD_MODE 0x00000003
+#define QSPI_MODE_24BIT 0x00000001
+#define QSPI_MODE_32BIT 0x00000002
+#define SD_MODE 0x00000003 /* sd 0 */
+#define SD_MODE1 0x00000005 /* sd 1 */
+#define NAND_MODE 0x00000004
#define EMMC_MODE 0x00000006
#define JTAG_MODE 0x00000000
@@ -106,9 +115,20 @@ struct apu_regs {
#define apu_base ((struct apu_regs *)ZYNQMP_APU_BASEADDR)
/* Board version value */
+#define ZYNQMP_CSU_BASEADDR 0xFFCA0000
#define ZYNQMP_CSU_VERSION_SILICON 0x0
#define ZYNQMP_CSU_VERSION_EP108 0x1
#define ZYNQMP_CSU_VERSION_VELOCE 0x2
#define ZYNQMP_CSU_VERSION_QEMU 0x3
+#define ZYNQMP_SILICON_VER_MASK 0xF000
+#define ZYNQMP_SILICON_VER_SHIFT 12
+
+struct csu_regs {
+ u32 reserved0[17];
+ u32 version;
+};
+
+#define csu_base ((struct csu_regs *)ZYNQMP_CSU_BASEADDR)
+
#endif /* _ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-zynq/ddrc.c b/arch/arm/mach-zynq/ddrc.c
index 5b20accbcb172d7e0e40dc7c92933f5123e1485a..d74f8dbbc45dfb9f6440ea38fa44552404f436ef 100644
--- a/arch/arm/mach-zynq/ddrc.c
+++ b/arch/arm/mach-zynq/ddrc.c
@@ -42,8 +42,6 @@ void zynq_ddrc_init(void)
*/
/* cppcheck-suppress nullPointer */
memset((void *)0, 0, 1 * 1024 * 1024);
-
- gd->ram_size /= 2;
} else {
puts("ECC disabled ");
}
diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig
index 604f6815af5b460a775557ecf4be19d5753fb4cf..30ea484f48aafe00d536634722d0b31bddc50c26 100644
--- a/arch/microblaze/Kconfig
+++ b/arch/microblaze/Kconfig
@@ -13,6 +13,7 @@ config TARGET_MICROBLAZE_GENERIC
select SUPPORT_SPL
select OF_CONTROL
select DM
+ select DM_SERIAL
endchoice
diff --git a/arch/microblaze/cpu/Makefile b/arch/microblaze/cpu/Makefile
index 4955e812360bdd9d9c1bf94024f3b21485db1d48..069721033f081a08b13b459d4c1c69b8070426cf 100644
--- a/arch/microblaze/cpu/Makefile
+++ b/arch/microblaze/cpu/Makefile
@@ -7,5 +7,5 @@
extra-y = start.o
obj-y = irq.o
-obj-y += cpu.o interrupts.o cache.o exception.o timer.o
+obj-y += interrupts.o cache.o exception.o timer.o
obj-$(CONFIG_SPL_BUILD) += spl.o
diff --git a/arch/microblaze/cpu/cpu.c b/arch/microblaze/cpu/cpu.c
deleted file mode 100644
index 8e459d807f9297256a250f8b8bb8f41f47377e01..0000000000000000000000000000000000000000
--- a/arch/microblaze/cpu/cpu.c
+++ /dev/null
@@ -1,9 +0,0 @@
-/*
- * (C) Copyright 2004 Atmark Techno, Inc.
- *
- * Yasushi SHOJI <yashi@atmark-techno.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/* EMPTY FILE */
diff --git a/arch/microblaze/cpu/start.S b/arch/microblaze/cpu/start.S
index 206be3e3ee588ed1192d3d4e5fc9e93b3645c602..e9923b65ef3237bd1e2a60d3db34e0c5ee537146 100644
--- a/arch/microblaze/cpu/start.S
+++ b/arch/microblaze/cpu/start.S
@@ -155,6 +155,10 @@ clear_bss:
cmp r6, r5, r4 /* check if we have reach the end */
bnei r6, 2b
3: /* jumping to board_init */
+#ifdef CONFIG_DEBUG_UART
+ bralid r15, debug_uart_init
+ nop
+#endif
#ifndef CONFIG_SPL_BUILD
or r5, r0, r0 /* flags - empty */
addi r31, r0, _gd
diff --git a/arch/powerpc/cpu/ppc4xx/Kconfig b/arch/powerpc/cpu/ppc4xx/Kconfig
index efd316573ce6e9f8cf42acfc21af16c3c491ac11..36af1b9419b09f43d815b732fe8b36deb10e76c5 100644
--- a/arch/powerpc/cpu/ppc4xx/Kconfig
+++ b/arch/powerpc/cpu/ppc4xx/Kconfig
@@ -55,12 +55,6 @@ config TARGET_YOSEMITE
config TARGET_YUCCA
bool "Support yucca"
-config TARGET_FX12MM
- bool "Support fx12mm"
-
-config TARGET_V5FX30TEVAL
- bool "Support v5fx30teval"
-
config TARGET_CPCI2DP
bool "Support CPCI2DP"
@@ -115,14 +109,19 @@ config TARGET_PIP405
config TARGET_XPEDITE1000
bool "Support xpedite1000"
-config TARGET_ML507
- bool "Support ml507"
-
config TARGET_XILINX_PPC405_GENERIC
bool "Support xilinx-ppc405-generic"
+ select SUPPORT_SPL
+ select OF_CONTROL
+ select DM
+ select DM_SERIAL
config TARGET_XILINX_PPC440_GENERIC
bool "Support xilinx-ppc440-generic"
+ select SUPPORT_SPL
+ select OF_CONTROL
+ select DM
+ select DM_SERIAL
endchoice
@@ -139,8 +138,6 @@ source "board/amcc/sequoia/Kconfig"
source "board/amcc/walnut/Kconfig"
source "board/amcc/yosemite/Kconfig"
source "board/amcc/yucca/Kconfig"
-source "board/avnet/fx12mm/Kconfig"
-source "board/avnet/v5fx30teval/Kconfig"
source "board/esd/cpci2dp/Kconfig"
source "board/esd/cpci405/Kconfig"
source "board/esd/plu405/Kconfig"
@@ -158,7 +155,6 @@ source "board/mpl/mip405/Kconfig"
source "board/mpl/pip405/Kconfig"
source "board/t3corp/Kconfig"
source "board/xes/xpedite1000/Kconfig"
-source "board/xilinx/ml507/Kconfig"
source "board/xilinx/ppc405-generic/Kconfig"
source "board/xilinx/ppc440-generic/Kconfig"
diff --git a/arch/powerpc/cpu/ppc4xx/interrupts.c b/arch/powerpc/cpu/ppc4xx/interrupts.c
index d9b565468b609869bbd10c38fd09c1cd3b84f183..45997d6eae0640dee7e36cffdcf1460afd336379 100644
--- a/arch/powerpc/cpu/ppc4xx/interrupts.c
+++ b/arch/powerpc/cpu/ppc4xx/interrupts.c
@@ -9,7 +9,7 @@
* Travis B. Sawyer, Sandburst Corporation, tsawyer@sandburst.com
*
* (C) Copyright 2008 (PPC440X05 port for Virtex 5 FX)
- * Ricardo Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
+ * Ricardo Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@gmail.com
* Work supported by Qtechnology (htpp://qtec.com)
*
* SPDX-License-Identifier: GPL-2.0+
diff --git a/arch/powerpc/cpu/ppc4xx/uic.c b/arch/powerpc/cpu/ppc4xx/uic.c
index bd955ed83ff0b14f90485aa5c9b9443cfec4b6bc..fb453b1adfb51bdf09cb3fe229bd6652cde35a63 100644
--- a/arch/powerpc/cpu/ppc4xx/uic.c
+++ b/arch/powerpc/cpu/ppc4xx/uic.c
@@ -9,7 +9,7 @@
* Travis B. Sawyer, Sandburst Corporation, tsawyer@sandburst.com
*
* (C) Copyright 2008 (PPC440X05 port for Virtex 5 FX)
- * Ricardo Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
+ * Ricardo Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@gmail.com
* Work supported by Qtechnology (htpp://qtec.com)
*
* SPDX-License-Identifier: GPL-2.0+
diff --git a/arch/powerpc/cpu/ppc4xx/xilinx_irq.c b/arch/powerpc/cpu/ppc4xx/xilinx_irq.c
index 71e1be02a6784a246d89ad28c62f69ec63f82b72..1a2e917eb23b032f83fc5c3cd6e00c9659c8ebab 100644
--- a/arch/powerpc/cpu/ppc4xx/xilinx_irq.c
+++ b/arch/powerpc/cpu/ppc4xx/xilinx_irq.c
@@ -1,6 +1,6 @@
/*
* (C) Copyright 2008
- * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
+ * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@gmail.com
* This work has been supported by: QTechnology http://qtec.com/
* Based on interrupts.c Wolfgang Denk-DENX Software Engineering-wd@denx.de
* SPDX-License-Identifier: GPL-2.0+
diff --git a/arch/powerpc/dts/Makefile b/arch/powerpc/dts/Makefile
index 5d9f5c2822b26b0a40707eb781913ff3923e59d0..80b4c0c4e374f27cb0545845508ce51919df4e1f 100644
--- a/arch/powerpc/dts/Makefile
+++ b/arch/powerpc/dts/Makefile
@@ -3,6 +3,8 @@
#
dtb-$(CONFIG_TARGET_CANYONLANDS) += arches.dtb canyonlands.dtb glacier.dtb
+dtb-$(CONFIG_TARGET_XILINX_PPC440_GENERIC) += xilinx-ppc440-generic.dtb
+dtb-$(CONFIG_TARGET_XILINX_PPC405_GENERIC) += xilinx-ppc405-generic.dtb
targets += $(dtb-y)
diff --git a/arch/powerpc/dts/xilinx-ppc405-generic.dts b/arch/powerpc/dts/xilinx-ppc405-generic.dts
new file mode 100644
index 0000000000000000000000000000000000000000..64983216b57fab2e5f0bca97afdfcf3331341699
--- /dev/null
+++ b/arch/powerpc/dts/xilinx-ppc405-generic.dts
@@ -0,0 +1,15 @@
+/dts-v1/;
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ aliases {
+ console = &uart0;
+ };
+
+ uart0: serial@84000000 {
+ compatible = "xlnx,xps-uartlite-1.00.a";
+ interrupts = <0 0>;
+ reg = <0x84000000 0x10000>;
+ };
+} ;
diff --git a/arch/powerpc/dts/xilinx-ppc440-generic.dts b/arch/powerpc/dts/xilinx-ppc440-generic.dts
new file mode 100644
index 0000000000000000000000000000000000000000..c83523a5a4810d840019522f6b3f125c8dcad6d3
--- /dev/null
+++ b/arch/powerpc/dts/xilinx-ppc440-generic.dts
@@ -0,0 +1,15 @@
+/dts-v1/;
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ aliases {
+ console = &uart0;
+ };
+
+ uart0: serial@8b000000 {
+ compatible = "xlnx,xps-uartlite-1.00.a";
+ interrupts = <0 0>;
+ reg = <0x8b000000 0x10000>;
+ };
+} ;
diff --git a/arch/powerpc/include/asm/interrupt.h b/arch/powerpc/include/asm/interrupt.h
index 1a6a93384e76f696af3ac958ee4cd9245dddaf7b..9f370dd83c9d1d0f8f50bf4d7a53e107f694bc16 100644
--- a/arch/powerpc/include/asm/interrupt.h
+++ b/arch/powerpc/include/asm/interrupt.h
@@ -1,6 +1,6 @@
/*
* (C) Copyright 2008
- * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
+ * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@gmail.com
* This work has been supported by: QTechnology http://qtec.com/
* Based on interrupts.c Wolfgang Denk-DENX Software Engineering-wd@denx.de
*
diff --git a/arch/powerpc/include/asm/xilinx_irq.h b/arch/powerpc/include/asm/xilinx_irq.h
index 333a0372b7888efdb1ffe15fa6e5fbf49cadd86d..5766bde366cee8b4bb55de63f55eb8517c500fa4 100644
--- a/arch/powerpc/include/asm/xilinx_irq.h
+++ b/arch/powerpc/include/asm/xilinx_irq.h
@@ -1,6 +1,6 @@
/*
* (C) Copyright 2008
- * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
+ * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@gmail.com
* This work has been supported by: QTechnology http://qtec.com/
* Based on interrupts.c Wolfgang Denk-DENX Software Engineering-wd@denx.de
* SPDX-License-Identifier: GPL-2.0+
diff --git a/board/avnet/fx12mm/Kconfig b/board/avnet/fx12mm/Kconfig
deleted file mode 100644
index 0b67ebde93b827bd2294c4aaf8362994277f3a90..0000000000000000000000000000000000000000
--- a/board/avnet/fx12mm/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_FX12MM
-
-config SYS_BOARD
- default "fx12mm"
-
-config SYS_VENDOR
- default "avnet"
-
-config SYS_CONFIG_NAME
- default "fx12mm"
-
-endif
diff --git a/board/avnet/fx12mm/MAINTAINERS b/board/avnet/fx12mm/MAINTAINERS
deleted file mode 100644
index c92e258df95c01a146357d11511ee1dad7af9faa..0000000000000000000000000000000000000000
--- a/board/avnet/fx12mm/MAINTAINERS
+++ /dev/null
@@ -1,7 +0,0 @@
-FX12MM BOARD
-M: Georg Schardt <schardt@team-ctech.de>
-S: Maintained
-F: board/avnet/fx12mm/
-F: include/configs/fx12mm.h
-F: configs/fx12mm_defconfig
-F: configs/fx12mm_flash_defconfig
diff --git a/board/avnet/fx12mm/Makefile b/board/avnet/fx12mm/Makefile
deleted file mode 100644
index 618b42f8917cc76562efb91858c7911708906f69..0000000000000000000000000000000000000000
--- a/board/avnet/fx12mm/Makefile
+++ /dev/null
@@ -1,11 +0,0 @@
-#
-# (C) Copyright 2008
-# Ricardo Ribalda,Universidad Autonoma de Madrid, ricardo.ribalda@uam.es
-# This work has been supported by: Qtechnology http://qtec.com/
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y += fx12mm.o
-
-include $(srctree)/board/xilinx/ppc405-generic/Makefile
diff --git a/board/avnet/fx12mm/fx12mm.c b/board/avnet/fx12mm/fx12mm.c
deleted file mode 100644
index 92e1cfb75f3c365009ffe2f3c5451016a5b7839d..0000000000000000000000000000000000000000
--- a/board/avnet/fx12mm/fx12mm.c
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * (C) Copyright 2008
- *
- * Author: Xilinx Inc.
- *
- * Modified by:
- * Georg Schardt <schardt@team-ctech.de>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <config.h>
-#include <common.h>
-#include <asm/processor.h>
-
-int checkboard(void)
-{
- char buf[64];
- int i;
- int l = getenv_f("serial#", buf, sizeof(buf));
-
- if (l < 0) {
- printf("Avnet Virtex4 FX12 with no serial #");
- } else {
- printf("Avnet Virtex4 FX12 Minimodul # ");
- for (i = 0; i < l; ++i) {
- if (buf[i] == ' ')
- break;
- putc(buf[i]);
- }
- }
- putc('\n');
- return 0;
-}
diff --git a/board/avnet/fx12mm/xparameters.h b/board/avnet/fx12mm/xparameters.h
deleted file mode 100644
index 94f682f8ecce44ff182effb37c280363b191b01f..0000000000000000000000000000000000000000
--- a/board/avnet/fx12mm/xparameters.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * (C) Copyright 2008
- *
- * Georg Schardt <schardt@team-ctech.de>
- *
- * SPDX-License-Identifier: GPL-2.0+
- *
- * CAUTION: This file is based on the xparameters.h automatically
- * generated by libgen. Version: Xilinx EDK 10.1.02 Build EDK_K_SP2.5
- */
-
-#ifndef __XPARAMETER_H__
-#define __XPARAMETER_H__
-
-/* RS232 */
-#define XPAR_UARTNS550_0_CLOCK_FREQ_HZ 100000000
-#define XPAR_UARTNS550_0_BASEADDR 0x83E00000
-
-
-/* INT_C */
-#define XPAR_XPS_INTC_0_DEVICE_ID 0
-#define XPAR_XPS_INTC_0_BASEADDR 0x81800000
-#define XPAR_INTC_MAX_NUM_INTR_INPUTS 2
-
-/* CPU core clock */
-#define XPAR_CORE_CLOCK_FREQ_HZ 300000000
-#define XPAR_PLB_CLOCK_FREQ_HZ 100000000
-
-/* RAM */
-#define XPAR_DDR2_SDRAM_MEM_BASEADDR 0x00000000
-
-/* FLASH */
-#define XPAR_FLASH_MEM0_BASEADDR 0xFFC00000
-
-#endif
diff --git a/board/avnet/v5fx30teval/Kconfig b/board/avnet/v5fx30teval/Kconfig
deleted file mode 100644
index 079387b707a7cc633c11a94deb5431eddf767ccc..0000000000000000000000000000000000000000
--- a/board/avnet/v5fx30teval/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_V5FX30TEVAL
-
-config SYS_BOARD
- default "v5fx30teval"
-
-config SYS_VENDOR
- default "avnet"
-
-config SYS_CONFIG_NAME
- default "v5fx30teval"
-
-endif
diff --git a/board/avnet/v5fx30teval/MAINTAINERS b/board/avnet/v5fx30teval/MAINTAINERS
deleted file mode 100644
index 91dde7a5c8f98a7d129088a6fa64c1bbee83dc15..0000000000000000000000000000000000000000
--- a/board/avnet/v5fx30teval/MAINTAINERS
+++ /dev/null
@@ -1,7 +0,0 @@
-V5FX30TEVAL BOARD
-M: Ricardo Ribalda <ricardo.ribalda@uam.es>
-S: Maintained
-F: board/avnet/v5fx30teval/
-F: include/configs/v5fx30teval.h
-F: configs/v5fx30teval_defconfig
-F: configs/v5fx30teval_flash_defconfig
diff --git a/board/avnet/v5fx30teval/Makefile b/board/avnet/v5fx30teval/Makefile
deleted file mode 100644
index 8c41af02d4f29c90f52a7666a99ce60d0c88e50b..0000000000000000000000000000000000000000
--- a/board/avnet/v5fx30teval/Makefile
+++ /dev/null
@@ -1,11 +0,0 @@
-#
-# (C) Copyright 2008
-# Ricardo Ribalda,Universidad Autonoma de Madrid, ricardo.ribalda@uam.es
-# This work has been supported by: Qtechnology http://qtec.com/
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y += v5fx30teval.o
-
-include $(srctree)/board/xilinx/ppc440-generic/Makefile
diff --git a/board/avnet/v5fx30teval/v5fx30teval.c b/board/avnet/v5fx30teval/v5fx30teval.c
deleted file mode 100644
index 68b0eb959dea5166dff73233837a7d0725bc4bda..0000000000000000000000000000000000000000
--- a/board/avnet/v5fx30teval/v5fx30teval.c
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * (C) Copyright 2008
- * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
- * This work has been supported by: QTechnology http://qtec.com/
- * SPDX-License-Identifier: GPL-2.0+
-*/
-
-#include <config.h>
-#include <common.h>
-#include <asm/processor.h>
-
-
-int checkboard(void)
-{
- puts("Avnet Virtex 5 FX30 Evaluation Board\n");
- return 0;
-}
diff --git a/board/avnet/v5fx30teval/xparameters.h b/board/avnet/v5fx30teval/xparameters.h
deleted file mode 100644
index 95b8c285ad1a6fcd1becbc1a97a3cffc5be8781b..0000000000000000000000000000000000000000
--- a/board/avnet/v5fx30teval/xparameters.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * (C) Copyright 2008
- * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
- * This work has been supported by: QTechnology http://qtec.com/
- * based on xparameters.h by Xilinx
- *
- * SPDX-License-Identifier: GPL-2.0+
-*/
-
-#ifndef XPARAMETER_H
-#define XPARAMETER_H
-
-#define XPAR_DDR2_SDRAM_MEM_BASEADDR 0x00000000
-#define XPAR_INTC_0_BASEADDR 0x81800000
-#define XPAR_UARTLITE_0_BASEADDR 0x84000000
-#define XPAR_FLASH_MEM0_BASEADDR 0xFF000000
-#define XPAR_PLB_CLOCK_FREQ_HZ 100000000
-#define XPAR_CORE_CLOCK_FREQ_HZ 400000000
-#define XPAR_INTC_MAX_NUM_INTR_INPUTS 13
-#define XPAR_UARTLITE_0_BAUDRATE 9600
-
-#endif
diff --git a/board/xilinx/microblaze-generic/microblaze-generic.c b/board/xilinx/microblaze-generic/microblaze-generic.c
index dfa6293222236ad2f01ff3a81e80dc85ad03ce24..ccd4ec955b5b74f6d55ec95c50d2828e1b55c589 100644
--- a/board/xilinx/microblaze-generic/microblaze-generic.c
+++ b/board/xilinx/microblaze-generic/microblaze-generic.c
@@ -12,7 +12,6 @@
#include <common.h>
#include <config.h>
#include <fdtdec.h>
-#include <netdev.h>
#include <asm/processor.h>
#include <asm/microblaze_intc.h>
#include <asm/asm.h>
@@ -24,7 +23,6 @@ DECLARE_GLOBAL_DATA_PTR;
static int reset_pin = -1;
#endif
-#if CONFIG_IS_ENABLED(OF_CONTROL)
ulong ram_base;
void dram_init_banksize(void)
@@ -58,14 +56,6 @@ int dram_init(void)
return 0;
};
-#else
-int dram_init(void)
-{
- gd->ram_size = CONFIG_SYS_SDRAM_SIZE;
-
- return 0;
-}
-#endif
int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
@@ -86,7 +76,7 @@ int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
return 0;
}
-int gpio_init (void)
+static int gpio_init(void)
{
#ifdef CONFIG_XILINX_GPIO
reset_pin = gpio_alloc(CONFIG_SYS_GPIO_0_ADDR, "reset", 1);
@@ -96,32 +86,9 @@ int gpio_init (void)
return 0;
}
-void board_init(void)
+int board_late_init(void)
{
gpio_init();
-}
-int board_eth_init(bd_t *bis)
-{
- int ret = 0;
-
-#ifdef CONFIG_XILINX_AXIEMAC
- ret |= xilinx_axiemac_initialize(bis, XILINX_AXIEMAC_BASEADDR,
- XILINX_AXIDMA_BASEADDR);
-#endif
-
-#if defined(CONFIG_XILINX_EMACLITE) && defined(XILINX_EMACLITE_BASEADDR)
- u32 txpp = 0;
- u32 rxpp = 0;
-# ifdef CONFIG_XILINX_EMACLITE_TX_PING_PONG
- txpp = 1;
-# endif
-# ifdef CONFIG_XILINX_EMACLITE_RX_PING_PONG
- rxpp = 1;
-# endif
- ret |= xilinx_emaclite_initialize(bis, XILINX_EMACLITE_BASEADDR,
- txpp, rxpp);
-#endif
-
- return ret;
+ return 0;
}
diff --git a/board/xilinx/microblaze-generic/xparameters.h b/board/xilinx/microblaze-generic/xparameters.h
index 8ba146cb88db7833f8b296b73390b20a63bb8827..ccb528ed9266646b5d4786efe30680925f9a6639 100644
--- a/board/xilinx/microblaze-generic/xparameters.h
+++ b/board/xilinx/microblaze-generic/xparameters.h
@@ -28,15 +28,6 @@
#define XILINX_TIMER_BASEADDR 0x41c00000
#define XILINX_TIMER_IRQ 0
-/* Uart pheriphery is RS232_Uart */
-#define XILINX_UARTLITE_BASEADDR 0x40600000
-#define XILINX_UARTLITE_BAUDRATE 115200
-
-/* IIC pheriphery is IIC_EEPROM */
-#define XILINX_IIC_0_BASEADDR 0x40800000
-#define XILINX_IIC_0_FREQ 100000
-#define XILINX_IIC_0_BIT 0
-
/* GPIO is LEDs_4Bit*/
#define XILINX_GPIO_BASEADDR 0x40000000
@@ -44,18 +35,6 @@
#define XILINX_FLASH_START 0x2c000000
#define XILINX_FLASH_SIZE 0x00800000
-/* Main Memory is DDR_SDRAM_64Mx32 */
-#define XILINX_RAM_START 0x28000000
-#define XILINX_RAM_SIZE 0x04000000
-
-/* Sysace Controller is SysACE_CompactFlash */
-#define XILINX_SYSACE_BASEADDR 0x41800000
-#define XILINX_SYSACE_HIGHADDR 0x4180ffff
-#define XILINX_SYSACE_MEM_WIDTH 16
-
-/* Ethernet controller is Ethernet_MAC */
-#define XILINX_EMACLITE_BASEADDR 0x40C00000
-
/* Watchdog IP is wxi_timebase_wdt_0 */
#define XILINX_WATCHDOG_BASEADDR 0x50000000
#define XILINX_WATCHDOG_IRQ 1
diff --git a/board/xilinx/ml507/Kconfig b/board/xilinx/ml507/Kconfig
deleted file mode 100644
index d580a7beafef79a2517b44b041517b29c33a603b..0000000000000000000000000000000000000000
--- a/board/xilinx/ml507/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_ML507
-
-config SYS_BOARD
- default "ml507"
-
-config SYS_VENDOR
- default "xilinx"
-
-config SYS_CONFIG_NAME
- default "ml507"
-
-endif
diff --git a/board/xilinx/ml507/MAINTAINERS b/board/xilinx/ml507/MAINTAINERS
deleted file mode 100644
index 8b40f445008557bd680088fbf4fa211aa83e7024..0000000000000000000000000000000000000000
--- a/board/xilinx/ml507/MAINTAINERS
+++ /dev/null
@@ -1,7 +0,0 @@
-ML507 BOARD
-M: Ricardo Ribalda <ricardo.ribalda@uam.es>
-S: Maintained
-F: board/xilinx/ml507/
-F: include/configs/ml507.h
-F: configs/ml507_defconfig
-F: configs/ml507_flash_defconfig
diff --git a/board/xilinx/ml507/Makefile b/board/xilinx/ml507/Makefile
deleted file mode 100644
index 9a3809f3c06572548c53ff2364aede85c638f69f..0000000000000000000000000000000000000000
--- a/board/xilinx/ml507/Makefile
+++ /dev/null
@@ -1,11 +0,0 @@
-#
-# (C) Copyright 2008
-# Ricardo Ribalda,Universidad Autonoma de Madrid, ricardo.ribalda@uam.es
-# This work has been supported by: Qtechnology http://qtec.com/
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y += ml507.o
-
-include $(srctree)/board/xilinx/ppc440-generic/Makefile
diff --git a/board/xilinx/ml507/ml507.c b/board/xilinx/ml507/ml507.c
deleted file mode 100644
index 83b764b7337bd828389247210c08c05a4c3fb14e..0000000000000000000000000000000000000000
--- a/board/xilinx/ml507/ml507.c
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * (C) Copyright 2008
- * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
- * This work has been supported by: QTechnology http://qtec.com/
- * SPDX-License-Identifier: GPL-2.0+
-*/
-
-#include <config.h>
-#include <common.h>
-#include <asm/processor.h>
-
-
-int checkboard(void)
-{
- puts("Xilinx ML507 Board\n");
- return 0;
-}
diff --git a/board/xilinx/ml507/xparameters.h b/board/xilinx/ml507/xparameters.h
deleted file mode 100644
index e30e592bbe1257a3b964cbf866e61243f4c1bd68..0000000000000000000000000000000000000000
--- a/board/xilinx/ml507/xparameters.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * (C) Copyright 2008
- * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
- * This work has been supported by: QTechnology http://qtec.com/
- * based on xparameters-ml507.h by Xilinx
- *
- * SPDX-License-Identifier: GPL-2.0+
-*/
-
-#ifndef XPARAMETER_H
-#define XPARAMETER_H
-
-#define XPAR_DDR2_SDRAM_MEM_BASEADDR 0x00000000
-#define XPAR_IIC_EEPROM_BASEADDR 0x81600000
-#define XPAR_INTC_0_BASEADDR 0x81800000
-#define XPAR_UARTLITE_0_BASEADDR 0x84000000
-#define XPAR_FLASH_MEM0_BASEADDR 0xFE000000
-#define XPAR_PLB_CLOCK_FREQ_HZ 100000000
-#define XPAR_CORE_CLOCK_FREQ_HZ 400000000
-#define XPAR_INTC_MAX_NUM_INTR_INPUTS 13
-#define XPAR_UARTLITE_0_BAUDRATE 9600
-
-#endif
diff --git a/board/xilinx/ppc405-generic/MAINTAINERS b/board/xilinx/ppc405-generic/MAINTAINERS
index 2b0c98dc8b7346d1430531de24a931f43a1b9e80..ba48f50c29bf9c38d6c40bdbf0e3a431f9bae0ec 100644
--- a/board/xilinx/ppc405-generic/MAINTAINERS
+++ b/board/xilinx/ppc405-generic/MAINTAINERS
@@ -1,5 +1,5 @@
PPC405-GENERIC BOARD
-M: Ricardo Ribalda <ricardo.ribalda@uam.es>
+M: Ricardo Ribalda <ricardo.ribalda@gmail.com>
S: Maintained
F: board/xilinx/ppc405-generic/
F: include/configs/xilinx-ppc405-generic.h
diff --git a/board/xilinx/ppc405-generic/Makefile b/board/xilinx/ppc405-generic/Makefile
index c9da870657477df299f1708d593d2b704c037285..2800f68626408d2897aaefd6ba49c93c0282a7d5 100644
--- a/board/xilinx/ppc405-generic/Makefile
+++ b/board/xilinx/ppc405-generic/Makefile
@@ -3,10 +3,10 @@
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# (C) Copyright 2008
-# Ricardo Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
+# Ricardo Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@gmail.com
# Work supported by Qtechnology http://www.qtec.com
#
# SPDX-License-Identifier: GPL-2.0+
#
-obj-y += ../../xilinx/ppc405-generic/xilinx_ppc405_generic.o
+obj-y += xilinx_ppc405_generic.o
diff --git a/board/xilinx/ppc405-generic/xilinx_ppc405_generic.c b/board/xilinx/ppc405-generic/xilinx_ppc405_generic.c
index e3dd468f1eb36df3c221e740d9beda797cb1fd96..3729f07624a3420b2fc733e30363a5f3fe58f410 100644
--- a/board/xilinx/ppc405-generic/xilinx_ppc405_generic.c
+++ b/board/xilinx/ppc405-generic/xilinx_ppc405_generic.c
@@ -1,6 +1,6 @@
/*
* (C) Copyright 2008
- * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
+ * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@gmail.com
* This work has been supported by: QTechnology http://qtec.com/
*
* SPDX-License-Identifier: GPL-2.0+
@@ -10,39 +10,32 @@
#include <common.h>
#include <asm/processor.h>
-ulong __get_PCI_freq(void)
+ulong get_PCI_freq(void)
{
return 0;
}
-ulong get_PCI_freq(void) __attribute__((weak, alias("__get_PCI_freq")));
-
-int __board_pre_init(void)
-{
- return 0;
-}
-int board_pre_init(void) __attribute__((weak, alias("__board_pre_init")));
-
-int __checkboard(void)
+int checkboard(void)
{
puts("Xilinx PPC405 Generic Board\n");
return 0;
}
-int checkboard(void) __attribute__((weak, alias("__checkboard")));
-phys_size_t __initdram(int board_type)
+phys_size_t initdram(int board_type)
{
return get_ram_size(XPAR_DDR2_SDRAM_MEM_BASEADDR,
CONFIG_SYS_SDRAM_SIZE_MB * 1024 * 1024);
}
-phys_size_t initdram(int) __attribute__((weak, alias("__initdram")));
-void __get_sys_info(sys_info_t *sysInfo)
+void get_sys_info(sys_info_t *sys_info)
{
- sysInfo->freqProcessor = XPAR_CORE_CLOCK_FREQ_HZ;
- sysInfo->freqPLB = XPAR_PLB_CLOCK_FREQ_HZ;
- sysInfo->freqPCI = 0;
+ sys_info->freqProcessor = XPAR_CORE_CLOCK_FREQ_HZ;
+ sys_info->freqPLB = XPAR_PLB_CLOCK_FREQ_HZ;
+ sys_info->freqPCI = 0;
return;
}
-void get_sys_info(sys_info_t *) __attribute__((weak, alias("__get_sys_info")));
+
+int get_serial_clock(void){
+ return XPAR_UARTNS550_0_CLOCK_FREQ_HZ;
+}
diff --git a/board/xilinx/ppc405-generic/xparameters.h b/board/xilinx/ppc405-generic/xparameters.h
index f0ff78fca565a53af36f82b46df4091be9b2c9ed..c3df9e51091f26977d56e4a070b9c7b3b17c3a15 100644
--- a/board/xilinx/ppc405-generic/xparameters.h
+++ b/board/xilinx/ppc405-generic/xparameters.h
@@ -1,6 +1,6 @@
/*
* (C) Copyright 2008
- * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
+ * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@gmail.com
* This work has been supported by: QTechnology http://qtec.com/
* based on xparameters-ml507.h by Xilinx
*
@@ -14,12 +14,11 @@
#define XPAR_IIC_EEPROM_BASEADDR 0x81600000
#define XPAR_INTC_0_BASEADDR 0x81800000
#define XPAR_SPI_0_BASEADDR 0x83400000
-#define XPAR_UARTLITE_0_BASEADDR 0x84000000
#define XPAR_FLASH_MEM0_BASEADDR 0xFE000000
#define XPAR_PLB_CLOCK_FREQ_HZ 100000000
#define XPAR_CORE_CLOCK_FREQ_HZ 400000000
-#define XPAR_INTC_MAX_NUM_INTR_INPUTS 13
-#define XPAR_UARTLITE_0_BAUDRATE 9600
+#define XPAR_INTC_MAX_NUM_INTR_INPUTS 32
#define XPAR_SPI_0_NUM_TRANSFER_BITS 8
+#define XPAR_UARTNS550_0_CLOCK_FREQ_HZ 100000000
#endif
diff --git a/board/xilinx/ppc440-generic/MAINTAINERS b/board/xilinx/ppc440-generic/MAINTAINERS
index 2d0b11af914bfdf002193747f220ae08c226159d..0258c8204ae143116ada7800faa1db5cb7d597d3 100644
--- a/board/xilinx/ppc440-generic/MAINTAINERS
+++ b/board/xilinx/ppc440-generic/MAINTAINERS
@@ -1,5 +1,5 @@
PPC440-GENERIC BOARD
-M: Ricardo Ribalda <ricardo.ribalda@uam.es>
+M: Ricardo Ribalda <ricardo.ribalda@gmail.com>
S: Maintained
F: board/xilinx/ppc440-generic/
F: include/configs/xilinx-ppc440-generic.h
diff --git a/board/xilinx/ppc440-generic/Makefile b/board/xilinx/ppc440-generic/Makefile
index 0acd95d6e4e2b01a54883f56837d67c6ee4b49c3..4d5f41029ac684a17ace942f0dd093c50a91f9c3 100644
--- a/board/xilinx/ppc440-generic/Makefile
+++ b/board/xilinx/ppc440-generic/Makefile
@@ -3,11 +3,11 @@
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# (C) Copyright 2008
-# Ricardo Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
+# Ricardo Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@gmail.com
# Work supported by Qtechnology http://www.qtec.com
#
# SPDX-License-Identifier: GPL-2.0+
#
-obj-y += ../../xilinx/ppc440-generic/xilinx_ppc440_generic.o
-extra-y += ../../xilinx/ppc440-generic/init.o
+obj-y += xilinx_ppc440_generic.o
+extra-y += init.o
diff --git a/board/xilinx/ppc440-generic/init.S b/board/xilinx/ppc440-generic/init.S
index 4598a376843a4ecaee9dc631cee9cf91fead0e9d..f9ff35f51b7a1449d5eccce685aa93f4a60a574b 100644
--- a/board/xilinx/ppc440-generic/init.S
+++ b/board/xilinx/ppc440-generic/init.S
@@ -1,6 +1,6 @@
/*
* (C) Copyright 2008
- * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
+ * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@gmail.com
* This work has been supported by: QTechnology http://qtec.com/
*
* SPDX-License-Identifier: GPL-2.0+
diff --git a/board/xilinx/ppc440-generic/xilinx_ppc440_generic.c b/board/xilinx/ppc440-generic/xilinx_ppc440_generic.c
index 74df2f4ff785fb0d44cbf00f0cce4ce2ca3a03f4..d8233529304d018b1d720d31b67e299a1244135a 100644
--- a/board/xilinx/ppc440-generic/xilinx_ppc440_generic.c
+++ b/board/xilinx/ppc440-generic/xilinx_ppc440_generic.c
@@ -1,6 +1,6 @@
/*
* (C) Copyright 2008
- * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
+ * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@gmail.com
* This work has been supported by: QTechnology http://qtec.com/
*
* SPDX-License-Identifier: GPL-2.0+
@@ -8,34 +8,51 @@
#include <config.h>
#include <common.h>
+#include <netdev.h>
#include <asm/processor.h>
-int __board_pre_init(void)
-{
- return 0;
-}
-int board_pre_init(void) __attribute__((weak, alias("__board_pre_init")));
-
-int __checkboard(void)
+int checkboard(void)
{
puts("Xilinx PPC440 Generic Board\n");
return 0;
}
-int checkboard(void) __attribute__((weak, alias("__checkboard")));
-phys_size_t __initdram(int board_type)
+phys_size_t initdram(int board_type)
{
return get_ram_size(XPAR_DDR2_SDRAM_MEM_BASEADDR,
CONFIG_SYS_SDRAM_SIZE_MB * 1024 * 1024);
}
-phys_size_t initdram(int) __attribute__((weak, alias("__initdram")));
-void __get_sys_info(sys_info_t *sysInfo)
+void get_sys_info(sys_info_t *sys_info)
{
- sysInfo->freqProcessor = XPAR_CORE_CLOCK_FREQ_HZ;
- sysInfo->freqPLB = XPAR_PLB_CLOCK_FREQ_HZ;
- sysInfo->freqPCI = 0;
+ sys_info->freqProcessor = XPAR_CORE_CLOCK_FREQ_HZ;
+ sys_info->freqPLB = XPAR_PLB_CLOCK_FREQ_HZ;
+ sys_info->freqPCI = 0;
return;
}
-void get_sys_info(sys_info_t *) __attribute__((weak, alias("__get_sys_info")));
+
+int get_serial_clock(void){
+ return XPAR_UARTNS550_0_CLOCK_FREQ_HZ;
+}
+
+int board_eth_init(bd_t *bis)
+{
+ int ret = 0;
+
+ puts("Init xilinx temac\n");
+#ifdef XPAR_LLTEMAC_0_BASEADDR
+ ret |= xilinx_ll_temac_eth_init(bis, XPAR_LLTEMAC_0_BASEADDR,
+ XILINX_LL_TEMAC_M_SDMA_DCR | XILINX_LL_TEMAC_M_SDMA_PLB,
+ XPAR_LLTEMAC_0_LLINK_CONNECTED_BASEADDR);
+
+#endif
+
+#ifdef XPAR_LLTEMAC_1_BASEADDR
+ ret |= xilinx_ll_temac_eth_init(bis, XPAR_LLTEMAC_1_BASEADDR,
+ XILINX_LL_TEMAC_M_SDMA_DCR | XILINX_LL_TEMAC_M_SDMA_PLB,
+ XPAR_LLTEMAC_1_LLINK_CONNECTED_BASEADDR);
+#endif
+
+ return ret;
+}
diff --git a/board/xilinx/ppc440-generic/xparameters.h b/board/xilinx/ppc440-generic/xparameters.h
index e30e592bbe1257a3b964cbf866e61243f4c1bd68..b45a6a1d7668176e2c595992740d325618dd43e2 100644
--- a/board/xilinx/ppc440-generic/xparameters.h
+++ b/board/xilinx/ppc440-generic/xparameters.h
@@ -1,6 +1,6 @@
/*
* (C) Copyright 2008
- * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
+ * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@gmail.com
* This work has been supported by: QTechnology http://qtec.com/
* based on xparameters-ml507.h by Xilinx
*
@@ -12,12 +12,15 @@
#define XPAR_DDR2_SDRAM_MEM_BASEADDR 0x00000000
#define XPAR_IIC_EEPROM_BASEADDR 0x81600000
-#define XPAR_INTC_0_BASEADDR 0x81800000
-#define XPAR_UARTLITE_0_BASEADDR 0x84000000
-#define XPAR_FLASH_MEM0_BASEADDR 0xFE000000
+#define XPAR_INTC_0_BASEADDR 0x87000000
+#define XPAR_FLASH_MEM0_BASEADDR 0xF0000000
#define XPAR_PLB_CLOCK_FREQ_HZ 100000000
#define XPAR_CORE_CLOCK_FREQ_HZ 400000000
-#define XPAR_INTC_MAX_NUM_INTR_INPUTS 13
-#define XPAR_UARTLITE_0_BAUDRATE 9600
+#define XPAR_INTC_MAX_NUM_INTR_INPUTS 32
+#define XPAR_UARTNS550_0_CLOCK_FREQ_HZ 100000000
+#define XPAR_LLTEMAC_0_LLINK_CONNECTED_BASEADDR 0x80
+#define XPAR_LLTEMAC_1_LLINK_CONNECTED_BASEADDR 0x98
+#define XPAR_LLTEMAC_0_BASEADDR 0x83000000
+#define XPAR_LLTEMAC_1_BASEADDR 0x83000040
#endif
diff --git a/board/xilinx/zynq/board.c b/board/xilinx/zynq/board.c
index 414f5302a0662fb860b5a3410d67b3e80df349b1..01bae5d67e3f9ee686013a4db934a7ff9cac9144 100644
--- a/board/xilinx/zynq/board.c
+++ b/board/xilinx/zynq/board.c
@@ -8,7 +8,6 @@
#include <fdtdec.h>
#include <fpga.h>
#include <mmc.h>
-#include <netdev.h>
#include <zynqpl.h>
#include <asm/arch/hardware.h>
#include <asm/arch/sys_proto.h>
@@ -94,34 +93,11 @@ int board_late_init(void)
#ifdef CONFIG_DISPLAY_BOARDINFO
int checkboard(void)
{
- puts("Board:\tXilinx Zynq\n");
+ puts("Board: Xilinx Zynq\n");
return 0;
}
#endif
-int board_eth_init(bd_t *bis)
-{
- u32 ret = 0;
-
-#ifdef CONFIG_XILINX_AXIEMAC
- ret |= xilinx_axiemac_initialize(bis, XILINX_AXIEMAC_BASEADDR,
- XILINX_AXIDMA_BASEADDR);
-#endif
-#ifdef CONFIG_XILINX_EMACLITE
- u32 txpp = 0;
- u32 rxpp = 0;
-# ifdef CONFIG_XILINX_EMACLITE_TX_PING_PONG
- txpp = 1;
-# endif
-# ifdef CONFIG_XILINX_EMACLITE_RX_PING_PONG
- rxpp = 1;
-# endif
- ret |= xilinx_emaclite_initialize(bis, XILINX_EMACLITE_BASEADDR,
- txpp, rxpp);
-#endif
- return ret;
-}
-
int dram_init(void)
{
#if CONFIG_IS_ENABLED(OF_CONTROL)
diff --git a/board/xilinx/zynqmp/zynqmp.c b/board/xilinx/zynqmp/zynqmp.c
index 2cf47125d433c1f99c23aa803cf1d9d6c622963b..44d347ed3bf0e857244ebb2971bf7990db73432e 100644
--- a/board/xilinx/zynqmp/zynqmp.c
+++ b/board/xilinx/zynqmp/zynqmp.c
@@ -9,6 +9,7 @@
#include <netdev.h>
#include <ahci.h>
#include <scsi.h>
+#include <asm/arch/clk.h>
#include <asm/arch/hardware.h>
#include <asm/arch/sys_proto.h>
#include <asm/io.h>
@@ -28,10 +29,18 @@ int board_early_init_r(void)
{
u32 val;
- val = readl(&crlapb_base->timestamp_ref_ctrl);
- val |= ZYNQMP_CRL_APB_TIMESTAMP_REF_CTRL_CLKACT;
- writel(val, &crlapb_base->timestamp_ref_ctrl);
-
+ if (current_el() == 3) {
+ val = readl(&crlapb_base->timestamp_ref_ctrl);
+ val |= ZYNQMP_CRL_APB_TIMESTAMP_REF_CTRL_CLKACT;
+ writel(val, &crlapb_base->timestamp_ref_ctrl);
+
+ /* Program freq register in System counter */
+ writel(zynqmp_get_system_timer_freq(),
+ &iou_scntr_secure->base_frequency_id_register);
+ /* And enable system counter */
+ writel(ZYNQMP_IOU_SCNTR_COUNTER_CONTROL_REGISTER_EN,
+ &iou_scntr_secure->counter_control_register);
+ }
/* Program freq register in System counter and enable system counter */
writel(gd->cpu_clk, &iou_scntr->base_frequency_id_register);
writel(ZYNQMP_IOU_SCNTR_COUNTER_CONTROL_REGISTER_HDBG |
@@ -48,11 +57,6 @@ int dram_init(void)
return 0;
}
-int timer_init(void)
-{
- return 0;
-}
-
void reset_cpu(ulong addr)
{
}
@@ -73,11 +77,36 @@ int board_late_init(void)
reg = readl(&crlapb_base->boot_mode);
bootmode = reg & BOOT_MODES_MASK;
+ puts("Bootmode: ");
switch (bootmode) {
- case SD_MODE:
+ case JTAG_MODE:
+ puts("JTAG_MODE\n");
+ setenv("modeboot", "jtagboot");
+ break;
+ case QSPI_MODE_24BIT:
+ case QSPI_MODE_32BIT:
+ setenv("modeboot", "qspiboot");
+ puts("QSPI_MODE\n");
+ break;
case EMMC_MODE:
+ puts("EMMC_MODE\n");
+ setenv("modeboot", "sdboot");
+ break;
+ case SD_MODE:
+ puts("SD_MODE\n");
setenv("modeboot", "sdboot");
break;
+ case SD_MODE1:
+ puts("SD_MODE1\n");
+#if defined(CONFIG_ZYNQ_SDHCI0) && defined(CONFIG_ZYNQ_SDHCI1)
+ setenv("sdbootdev", "1");
+#endif
+ setenv("modeboot", "sdboot");
+ break;
+ case NAND_MODE:
+ puts("NAND_MODE\n");
+ setenv("modeboot", "nandboot");
+ break;
default:
printf("Invalid Boot Mode:0x%x\n", bootmode);
break;
@@ -88,7 +117,7 @@ int board_late_init(void)
int checkboard(void)
{
- puts("Board:\tXilinx ZynqMP\n");
+ puts("Board: Xilinx ZynqMP\n");
return 0;
}
diff --git a/cmd/bdinfo.c b/cmd/bdinfo.c
index deed6d825558e561f90a62d0859cc8fefd21aa31..8eda68b4f9972e1be0bb46f1c69f76be893402d6 100644
--- a/cmd/bdinfo.c
+++ b/cmd/bdinfo.c
@@ -205,7 +205,7 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
print_num("sram start ", (ulong)bd->bi_sramstart);
print_num("sram size ", (ulong)bd->bi_sramsize);
#endif
-#if defined(CONFIG_CMD_NET)
+#if defined(CONFIG_CMD_NET) && !defined(CONFIG_DM_ETH)
print_eths();
#endif
printf("baudrate = %u bps\n", gd->baudrate);
diff --git a/cmd/fpga.c b/cmd/fpga.c
index 7f99aabf8a5c69454a19fced5a71c596b043dddc..8956eb1b654adf4caef2681b8f8a6b93e1245583 100644
--- a/cmd/fpga.c
+++ b/cmd/fpga.c
@@ -86,7 +86,7 @@ int do_fpga(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
debug("* fpga: cmdline image address = 0x%08lx\n",
(ulong)fpga_data);
}
- debug("%s: fpga_data = 0x%x\n", __func__, (uint)fpga_data);
+ debug("%s: fpga_data = 0x%lx\n", __func__, (ulong)fpga_data);
case 3: /* fpga <op> <dev | data addr> */
dev = (int)simple_strtoul(argv[2], NULL, 16);
@@ -107,13 +107,13 @@ int do_fpga(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
} else
#endif
{
- fpga_data = (void *)dev;
+ fpga_data = (void *)(uintptr_t)dev;
debug("* fpga: cmdline image addr = 0x%08lx\n",
(ulong)fpga_data);
}
- debug("%s: fpga_data = 0x%x\n",
- __func__, (uint)fpga_data);
+ debug("%s: fpga_data = 0x%lx\n",
+ __func__, (ulong)fpga_data);
dev = FPGA_INVALID_DEVICE; /* reset device num */
}
diff --git a/configs/fx12mm_defconfig b/configs/fx12mm_defconfig
deleted file mode 100644
index c714d0d35e4e24ef644c8b01ed828edb1ec8c012..0000000000000000000000000000000000000000
--- a/configs/fx12mm_defconfig
+++ /dev/null
@@ -1,10 +0,0 @@
-CONFIG_PPC=y
-CONFIG_4xx=y
-CONFIG_TARGET_FX12MM=y
-CONFIG_SYS_EXTRA_OPTIONS="SYS_TEXT_BASE=0x04000000,RESET_VECTOR_ADDRESS=0x04100000,INIT_TLB=board/xilinx/ppc405-generic/init.o"
-CONFIG_SYS_PROMPT="FX12MM:/# "
-# CONFIG_CMD_IMLS is not set
-# CONFIG_CMD_SETEXPR is not set
-# CONFIG_CMD_NET is not set
-# CONFIG_CMD_NFS is not set
-CONFIG_SYS_NS16550=y
diff --git a/configs/fx12mm_flash_defconfig b/configs/fx12mm_flash_defconfig
deleted file mode 100644
index ac3841260d65a8c1f1fdebbba7bae6b6ab16def3..0000000000000000000000000000000000000000
--- a/configs/fx12mm_flash_defconfig
+++ /dev/null
@@ -1,9 +0,0 @@
-CONFIG_PPC=y
-CONFIG_4xx=y
-CONFIG_TARGET_FX12MM=y
-CONFIG_SYS_EXTRA_OPTIONS="SYS_TEXT_BASE=0xF7F60000,RESET_VECTOR_ADDRESS=0xF7FFFFFC,INIT_TLB=board/xilinx/ppc405-generic/init.o"
-# CONFIG_CMD_IMLS is not set
-# CONFIG_CMD_SETEXPR is not set
-# CONFIG_CMD_NET is not set
-# CONFIG_CMD_NFS is not set
-CONFIG_SYS_NS16550=y
diff --git a/configs/microblaze-generic_defconfig b/configs/microblaze-generic_defconfig
index ed336e6bc4412dd7bf9c4063c6d057139fdfa977..39c2ad2813dcd4ec72e7b77afbcdb3c2575e2a1c 100644
--- a/configs/microblaze-generic_defconfig
+++ b/configs/microblaze-generic_defconfig
@@ -1,10 +1,24 @@
CONFIG_MICROBLAZE=y
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
+CONFIG_SPL_DM=y
CONFIG_TARGET_MICROBLAZE_GENERIC=y
CONFIG_SYS_TEXT_BASE=0x29000000
CONFIG_DEFAULT_DEVICE_TREE="microblaze-generic"
CONFIG_SPL=y
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="U-Boot-mONStR> "
CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_TFTPPUT=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_PING=y
+CONFIG_SPL_OF_CONTROL=y
CONFIG_OF_EMBED=y
+CONFIG_NETCONSOLE=y
+CONFIG_DM_ETH=y
+CONFIG_XILINX_AXIEMAC=y
+CONFIG_XILINX_EMACLITE=y
+CONFIG_SYS_NS16550=y
+CONFIG_XILINX_UARTLITE=y
diff --git a/configs/ml507_defconfig b/configs/ml507_defconfig
deleted file mode 100644
index d1e4e30371bffc5d56d2bc540217a9569b47ce09..0000000000000000000000000000000000000000
--- a/configs/ml507_defconfig
+++ /dev/null
@@ -1,9 +0,0 @@
-CONFIG_PPC=y
-CONFIG_4xx=y
-CONFIG_TARGET_ML507=y
-CONFIG_SYS_EXTRA_OPTIONS="SYS_TEXT_BASE=0x04000000,RESET_VECTOR_ADDRESS=0x04100000,BOOT_FROM_XMD=1,INIT_TLB=board/xilinx/ppc440-generic/init.o"
-CONFIG_SYS_PROMPT="ml507:/# "
-# CONFIG_CMD_IMLS is not set
-# CONFIG_CMD_SETEXPR is not set
-# CONFIG_CMD_NET is not set
-# CONFIG_CMD_NFS is not set
diff --git a/configs/ml507_flash_defconfig b/configs/ml507_flash_defconfig
deleted file mode 100644
index 442e0ce1fa6a49b6de35303ea220880127514448..0000000000000000000000000000000000000000
--- a/configs/ml507_flash_defconfig
+++ /dev/null
@@ -1,8 +0,0 @@
-CONFIG_PPC=y
-CONFIG_4xx=y
-CONFIG_TARGET_ML507=y
-CONFIG_SYS_EXTRA_OPTIONS="SYS_TEXT_BASE=0xF7F60000,RESET_VECTOR_ADDRESS=0xF7FFFFFC,INIT_TLB=board/xilinx/ppc440-generic/init.o"
-# CONFIG_CMD_IMLS is not set
-# CONFIG_CMD_SETEXPR is not set
-# CONFIG_CMD_NET is not set
-# CONFIG_CMD_NFS is not set
diff --git a/configs/v5fx30teval_defconfig b/configs/v5fx30teval_defconfig
deleted file mode 100644
index 3e2ce7d2fe76e54a0a3cb9290945668554b99e4f..0000000000000000000000000000000000000000
--- a/configs/v5fx30teval_defconfig
+++ /dev/null
@@ -1,9 +0,0 @@
-CONFIG_PPC=y
-CONFIG_4xx=y
-CONFIG_TARGET_V5FX30TEVAL=y
-CONFIG_SYS_EXTRA_OPTIONS="SYS_TEXT_BASE=0x04000000,RESET_VECTOR_ADDRESS=0x04100000,BOOT_FROM_XMD=1,INIT_TLB=board/xilinx/ppc440-generic/init.o"
-CONFIG_SYS_PROMPT="v5fx30t:/# "
-# CONFIG_CMD_IMLS is not set
-# CONFIG_CMD_SETEXPR is not set
-# CONFIG_CMD_NET is not set
-# CONFIG_CMD_NFS is not set
diff --git a/configs/v5fx30teval_flash_defconfig b/configs/v5fx30teval_flash_defconfig
deleted file mode 100644
index b9b05e8b3951ef4429ffe2bfefdc95090349b2b4..0000000000000000000000000000000000000000
--- a/configs/v5fx30teval_flash_defconfig
+++ /dev/null
@@ -1,8 +0,0 @@
-CONFIG_PPC=y
-CONFIG_4xx=y
-CONFIG_TARGET_V5FX30TEVAL=y
-CONFIG_SYS_EXTRA_OPTIONS="SYS_TEXT_BASE=0xF7F60000,RESET_VECTOR_ADDRESS=0xF7FFFFFC,INIT_TLB=board/xilinx/ppc440-generic/init.o"
-# CONFIG_CMD_IMLS is not set
-# CONFIG_CMD_SETEXPR is not set
-# CONFIG_CMD_NET is not set
-# CONFIG_CMD_NFS is not set
diff --git a/configs/xilinx-ppc405-generic_defconfig b/configs/xilinx-ppc405-generic_defconfig
index 53fafc324e68f20923b8d65473bdefdcf12d703e..e7132cd611522403a01205cf683f601868d84705 100644
--- a/configs/xilinx-ppc405-generic_defconfig
+++ b/configs/xilinx-ppc405-generic_defconfig
@@ -7,3 +7,11 @@ CONFIG_SYS_PROMPT="xlx-ppc405:/# "
# CONFIG_CMD_SETEXPR is not set
# CONFIG_CMD_NET is not set
# CONFIG_CMD_NFS is not set
+CONFIG_SYS_MALLOC_SIMPLE=y
+CONFIG_XILINX_UARTLITE=y
+CONFIG_SYS_NS16550=y
+CONFIG_OF_EMBED=y
+CONFIG_OF_CONTROL=y
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_DEFAULT_DEVICE_TREE="xilinx-ppc440-generic"
diff --git a/configs/xilinx-ppc405-generic_flash_defconfig b/configs/xilinx-ppc405-generic_flash_defconfig
deleted file mode 100644
index 37084fb0a82d1253e6cf66afdd8aa26b11d9b5d3..0000000000000000000000000000000000000000
--- a/configs/xilinx-ppc405-generic_flash_defconfig
+++ /dev/null
@@ -1,8 +0,0 @@
-CONFIG_PPC=y
-CONFIG_4xx=y
-CONFIG_TARGET_XILINX_PPC405_GENERIC=y
-CONFIG_SYS_EXTRA_OPTIONS="SYS_TEXT_BASE=0xF7F60000,RESET_VECTOR_ADDRESS=0xF7FFFFFC"
-# CONFIG_CMD_IMLS is not set
-# CONFIG_CMD_SETEXPR is not set
-# CONFIG_CMD_NET is not set
-# CONFIG_CMD_NFS is not set
diff --git a/configs/xilinx-ppc440-generic_defconfig b/configs/xilinx-ppc440-generic_defconfig
index 79be48a9955e3fb6193534c70bd750633c66fb51..3bf2c4f8b88467f724dbc92f826f155aaddfc1be 100644
--- a/configs/xilinx-ppc440-generic_defconfig
+++ b/configs/xilinx-ppc440-generic_defconfig
@@ -3,7 +3,15 @@ CONFIG_4xx=y
CONFIG_TARGET_XILINX_PPC440_GENERIC=y
CONFIG_SYS_EXTRA_OPTIONS="SYS_TEXT_BASE=0x04000000,RESET_VECTOR_ADDRESS=0x04100000,BOOT_FROM_XMD=1"
CONFIG_SYS_PROMPT="board:/# "
-# CONFIG_CMD_IMLS is not set
-# CONFIG_CMD_SETEXPR is not set
-# CONFIG_CMD_NET is not set
-# CONFIG_CMD_NFS is not set
+CONFIG_SYS_MALLOC_SIMPLE=y
+CONFIG_XILINX_UARTLITE=y
+CONFIG_SYS_NS16550=y
+CONFIG_OF_EMBED=y
+CONFIG_OF_CONTROL=y
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_DEFAULT_DEVICE_TREE="xilinx-ppc440-generic"
+CONFIG_CMD_TFTPPUT=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_PING=y
+CONFIG_NETCONSOLE=y
diff --git a/configs/xilinx-ppc440-generic_flash_defconfig b/configs/xilinx-ppc440-generic_flash_defconfig
deleted file mode 100644
index 629903344b778f4acbb3817fb76b225211cb900e..0000000000000000000000000000000000000000
--- a/configs/xilinx-ppc440-generic_flash_defconfig
+++ /dev/null
@@ -1,8 +0,0 @@
-CONFIG_PPC=y
-CONFIG_4xx=y
-CONFIG_TARGET_XILINX_PPC440_GENERIC=y
-CONFIG_SYS_EXTRA_OPTIONS="SYS_TEXT_BASE=0xF7F60000,RESET_VECTOR_ADDRESS=0xF7FFFFFC"
-# CONFIG_CMD_IMLS is not set
-# CONFIG_CMD_SETEXPR is not set
-# CONFIG_CMD_NET is not set
-# CONFIG_CMD_NFS is not set
diff --git a/configs/zynq_microzed_defconfig b/configs/zynq_microzed_defconfig
index 30995babd4b63ae9f21d176f7e232b710ec671fa..a3a66ec41a377e2e4cb32681d57f17fe80cc31fb 100644
--- a/configs/zynq_microzed_defconfig
+++ b/configs/zynq_microzed_defconfig
@@ -6,6 +6,7 @@ CONFIG_SPL=y
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_FIT_SIGNATURE=y
+CONFIG_SYS_PROMPT="Zynq> "
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_GPIO=y
diff --git a/configs/zynq_picozed_defconfig b/configs/zynq_picozed_defconfig
index 339e399889be8f122c99cda99e4ea7c5db0d3d73..fbc603fd95cddcb668ef97170dd6ebbc54bdd404 100644
--- a/configs/zynq_picozed_defconfig
+++ b/configs/zynq_picozed_defconfig
@@ -3,6 +3,7 @@ CONFIG_ARCH_ZYNQ=y
CONFIG_TARGET_ZYNQ_PICOZED=y
CONFIG_DEFAULT_DEVICE_TREE="zynq-picozed"
CONFIG_SPL=y
+CONFIG_SYS_PROMPT="Zynq> "
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_GPIO=y
diff --git a/configs/zynq_zc702_defconfig b/configs/zynq_zc702_defconfig
index 065f8551945f0bd9642f2349c19a499b98e3d6ff..3540653e2270c0659c32092e475cd46a229af51d 100644
--- a/configs/zynq_zc702_defconfig
+++ b/configs/zynq_zc702_defconfig
@@ -5,6 +5,7 @@ CONFIG_SPL=y
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_FIT_SIGNATURE=y
+CONFIG_SYS_PROMPT="Zynq> "
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_GPIO=y
@@ -12,6 +13,7 @@ CONFIG_CMD_GPIO=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_SPL_DM_SEQ_ALIAS=y
CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_BAR=y
CONFIG_SPI_FLASH_SPANSION=y
CONFIG_SPI_FLASH_STMICRO=y
CONFIG_SPI_FLASH_WINBOND=y
diff --git a/configs/zynq_zc706_defconfig b/configs/zynq_zc706_defconfig
index 1059689aad45f20e10fde22af98159271e036224..f333b7a2bfedaada5294c1027bb838112f509e2b 100644
--- a/configs/zynq_zc706_defconfig
+++ b/configs/zynq_zc706_defconfig
@@ -6,6 +6,7 @@ CONFIG_SPL=y
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_FIT_SIGNATURE=y
+CONFIG_SYS_PROMPT="Zynq> "
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_GPIO=y
@@ -13,6 +14,7 @@ CONFIG_CMD_GPIO=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_SPL_DM_SEQ_ALIAS=y
CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_BAR=y
CONFIG_SPI_FLASH_SPANSION=y
CONFIG_SPI_FLASH_STMICRO=y
CONFIG_SPI_FLASH_WINBOND=y
diff --git a/configs/zynq_zc770_xm010_defconfig b/configs/zynq_zc770_xm010_defconfig
index a9dbda5eaa0b84aaedc2627dbfc3d0c98ea08a16..ebfdeb098b5bedf22f36e661105601360f616699 100644
--- a/configs/zynq_zc770_xm010_defconfig
+++ b/configs/zynq_zc770_xm010_defconfig
@@ -7,6 +7,7 @@ CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_FIT_SIGNATURE=y
CONFIG_SYS_EXTRA_OPTIONS="ZC770_XM010"
+CONFIG_SYS_PROMPT="Zynq> "
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_GPIO=y
@@ -14,6 +15,7 @@ CONFIG_CMD_GPIO=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_SPL_DM_SEQ_ALIAS=y
CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_BAR=y
CONFIG_SPI_FLASH_SPANSION=y
CONFIG_SPI_FLASH_STMICRO=y
CONFIG_SPI_FLASH_SST=y
diff --git a/configs/zynq_zc770_xm011_defconfig b/configs/zynq_zc770_xm011_defconfig
index 6ff00c64b4276df7b8700c77904008af97afc6b6..2bc88b8dd2f8c1fb6ca1dddffd4c853f4ee78a77 100644
--- a/configs/zynq_zc770_xm011_defconfig
+++ b/configs/zynq_zc770_xm011_defconfig
@@ -7,6 +7,7 @@ CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_FIT_SIGNATURE=y
CONFIG_SYS_EXTRA_OPTIONS="ZC770_XM011"
+CONFIG_SYS_PROMPT="Zynq> "
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_GPIO=y
diff --git a/configs/zynq_zc770_xm012_defconfig b/configs/zynq_zc770_xm012_defconfig
index 75d6c5531c92e3a3f09304f027931315c6109084..b0fa6610648d68e31ca0e1512cdcc7ea86a4b93b 100644
--- a/configs/zynq_zc770_xm012_defconfig
+++ b/configs/zynq_zc770_xm012_defconfig
@@ -7,6 +7,7 @@ CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_FIT_SIGNATURE=y
CONFIG_SYS_EXTRA_OPTIONS="ZC770_XM012"
+CONFIG_SYS_PROMPT="Zynq> "
CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_NET_RANDOM_ETHADDR=y
diff --git a/configs/zynq_zc770_xm013_defconfig b/configs/zynq_zc770_xm013_defconfig
index dd65929958e782c3785a2a01af0dd41b6369052f..9672940e91f2fe1285c89e42b2706903ed335d9e 100644
--- a/configs/zynq_zc770_xm013_defconfig
+++ b/configs/zynq_zc770_xm013_defconfig
@@ -7,10 +7,13 @@ CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_FIT_SIGNATURE=y
CONFIG_SYS_EXTRA_OPTIONS="ZC770_XM013"
+CONFIG_SYS_PROMPT="Zynq> "
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_SPL_DM_SEQ_ALIAS=y
+CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_BAR=y
CONFIG_ZYNQ_GEM=y
diff --git a/configs/zynq_zed_defconfig b/configs/zynq_zed_defconfig
index 73b17e20b27c80c0b0096a05ccd7962ba85cf1f5..58680127aa5d22d6b3037e1ca93346fe1b0b9d68 100644
--- a/configs/zynq_zed_defconfig
+++ b/configs/zynq_zed_defconfig
@@ -6,6 +6,7 @@ CONFIG_SPL=y
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_FIT_SIGNATURE=y
+CONFIG_SYS_PROMPT="Zynq> "
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_GPIO=y
@@ -13,6 +14,7 @@ CONFIG_CMD_GPIO=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_SPL_DM_SEQ_ALIAS=y
CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_BAR=y
CONFIG_SPI_FLASH_SPANSION=y
CONFIG_SPI_FLASH_STMICRO=y
CONFIG_SPI_FLASH_WINBOND=y
diff --git a/configs/zynq_zybo_defconfig b/configs/zynq_zybo_defconfig
index 577c5a958e11f223638ba02a51f8469bce48c1fc..ebaae49da1d4e8611f0bd63c72e8569fd4a0738a 100644
--- a/configs/zynq_zybo_defconfig
+++ b/configs/zynq_zybo_defconfig
@@ -6,17 +6,18 @@ CONFIG_SPL=y
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_FIT_SIGNATURE=y
+CONFIG_SYS_PROMPT="Zynq> "
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_SPL_DM_SEQ_ALIAS=y
+CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_SPANSION=y
CONFIG_ZYNQ_GEM=y
CONFIG_DEBUG_UART=y
CONFIG_DEBUG_UART_ZYNQ=y
CONFIG_DEBUG_UART_BASE=0xe0001000
CONFIG_DEBUG_UART_CLOCK=50000000
-CONFIG_SPI_FLASH=y
-CONFIG_SPI_FLASH_SPANSION=y
CONFIG_ZYNQ_QSPI=y
diff --git a/doc/device-tree-bindings/serial/xilinx_uartlite.txt b/doc/device-tree-bindings/serial/xilinx_uartlite.txt
new file mode 100644
index 0000000000000000000000000000000000000000..d15753c8c38057598615017ac238ab2156f71e36
--- /dev/null
+++ b/doc/device-tree-bindings/serial/xilinx_uartlite.txt
@@ -0,0 +1,13 @@
+Binding for Xilinx Uartlite Controller
+
+Required properties:
+- compatible : should be "xlnx,xps-uartlite-1.00.a", or "xlnx,opb-uartlite-1.00.b"
+- reg: Should contain UART controller registers location and length.
+- interrupts: Should contain UART controller interrupts.
+
+Example:
+ serial@40600000 {
+ compatible = "xlnx,xps-uartlite-1.00.a";
+ interrupts = <1 0>;
+ reg = <0x40600000 0x10000>;
+ };
diff --git a/doc/driver-model/serial-howto.txt b/doc/driver-model/serial-howto.txt
index c933b9081be1aba9079dee8f916a2696d219286b..e5e482e30bc297ad6f5b957b6ed65cf068009a76 100644
--- a/doc/driver-model/serial-howto.txt
+++ b/doc/driver-model/serial-howto.txt
@@ -15,7 +15,6 @@ is time for maintainers to start converting over the remaining serial drivers:
serial_pxa.c
serial_s3c24x0.c
serial_sa1100.c
- serial_xuartlite.c
usbtty.c
You should complete this by the end of January 2016.
diff --git a/drivers/fpga/xilinx.c b/drivers/fpga/xilinx.c
index c765a74a25e0f17895b8010cfcbb646f735a5093..d459a2f7a572180954bdc34a82fcf39c32be868e 100644
--- a/drivers/fpga/xilinx.c
+++ b/drivers/fpga/xilinx.c
@@ -75,8 +75,8 @@ int fpga_loadbitstream(int devnum, char *fpgadata, size_t size,
buffer[i] = *dataptr++;
if (xdesc->name) {
- i = strncmp(buffer, xdesc->name, strlen(xdesc->name));
- if (i) {
+ i = (ulong)strstr(buffer, xdesc->name);
+ if (!i) {
printf("%s: Wrong bitstream ID for this device\n",
__func__);
printf("%s: Bitstream ID %s, current device ID %d/%s\n",
diff --git a/drivers/hwmon/adt7460.c b/drivers/hwmon/adt7460.c
index fd05c177948215ec5fd36ddc34b310ef9a0b48e9..9b2c5b69ce5503837560329ba5c42a3c0a4fc4e8 100644
--- a/drivers/hwmon/adt7460.c
+++ b/drivers/hwmon/adt7460.c
@@ -1,6 +1,6 @@
/*
* (C) Copyright 2008
- * Ricado Ribalda-Universidad Autonoma de Madrid, ricardo.ribalda@uam.es
+ * Ricado Ribalda-Universidad Autonoma de Madrid, ricardo.ribalda@gmail.com
* This work has been supported by: QTechnology http://qtec.com/
* SPDX-License-Identifier: GPL-2.0+
*/
diff --git a/drivers/mmc/sdhci.c b/drivers/mmc/sdhci.c
index 02d71b934409f56e2ede04c31e40f611fc914987..ff770b16e27a6e25c50fa6a23226832865f2e324 100644
--- a/drivers/mmc/sdhci.c
+++ b/drivers/mmc/sdhci.c
@@ -530,6 +530,10 @@ int add_sdhci(struct sdhci_host *host, u32 max_clk, u32 min_clk)
if (caps & SDHCI_CAN_DO_8BIT)
host->cfg.host_caps |= MMC_MODE_8BIT;
}
+
+ if (host->quirks & SDHCI_QUIRK_NO_HISPD_BIT)
+ host->cfg.host_caps &= ~(MMC_MODE_HS | MMC_MODE_HS_52MHz);
+
if (host->host_caps)
host->cfg.host_caps |= host->host_caps;
diff --git a/drivers/mmc/zynq_sdhci.c b/drivers/mmc/zynq_sdhci.c
index 4fe3da93b206d0df8706efd371df44f653f4f60e..039ec16e91fe4b94775773a8d705fdb82de159e4 100644
--- a/drivers/mmc/zynq_sdhci.c
+++ b/drivers/mmc/zynq_sdhci.c
@@ -13,6 +13,10 @@
#include <malloc.h>
#include <sdhci.h>
+#ifndef CONFIG_ZYNQ_SDHCI_MIN_FREQ
+# define CONFIG_ZYNQ_SDHCI_MIN_FREQ 0
+#endif
+
static int arasan_sdhci_probe(struct udevice *dev)
{
struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev);
@@ -20,9 +24,15 @@ static int arasan_sdhci_probe(struct udevice *dev)
host->quirks = SDHCI_QUIRK_WAIT_SEND_CMD |
SDHCI_QUIRK_BROKEN_R1B;
+
+#ifdef CONFIG_ZYNQ_HISPD_BROKEN
+ host->quirks |= SDHCI_QUIRK_NO_HISPD_BIT;
+#endif
+
host->version = sdhci_readw(host, SDHCI_HOST_VERSION);
- add_sdhci(host, CONFIG_ZYNQ_SDHCI_MAX_FREQ, 0);
+ add_sdhci(host, CONFIG_ZYNQ_SDHCI_MAX_FREQ,
+ CONFIG_ZYNQ_SDHCI_MIN_FREQ);
upriv->mmc = host->mmc;
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index de54ca8014c76ee80d74ef293120dba36fedf6c5..218e1fee22c3919d14ef6eda4aecf80b5a6a9b70 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -102,6 +102,22 @@ config PCH_GBE
This MAC is present in Intel Platform Controller Hub EG20T. It
supports 10/100/1000 Mbps operation.
+config XILINX_AXIEMAC
+ depends on DM_ETH && (MICROBLAZE || ARCH_ZYNQ || ARCH_ZYNQMP)
+ select PHYLIB
+ select MII
+ bool "Xilinx AXI Ethernet"
+ help
+ This MAC is present in Xilinx Microblaze, Zynq and ZynqMP SoCs.
+
+config XILINX_EMACLITE
+ depends on DM_ETH && (MICROBLAZE || ARCH_ZYNQ || ARCH_ZYNQMP)
+ select PHYLIB
+ select MII
+ bool "Xilinx Ethernetlite"
+ help
+ This MAC is present in Xilinx Microblaze, Zynq and ZynqMP SoCs.
+
config ZYNQ_GEM
depends on DM_ETH && (ARCH_ZYNQ || ARCH_ZYNQMP)
select PHYLIB
diff --git a/drivers/net/phy/ti.c b/drivers/net/phy/ti.c
index 541a57f98028937965cfa8337d334aed83f5ec73..c3912d52f320d36a6bca7ac99efe32bcde1060c8 100644
--- a/drivers/net/phy/ti.c
+++ b/drivers/net/phy/ti.c
@@ -41,6 +41,8 @@
/* PHY CTRL bits */
#define DP83867_PHYCR_FIFO_DEPTH_SHIFT 14
+#define DP83867_MDI_CROSSOVER 5
+#define DP83867_MDI_CROSSOVER_AUTO 2
/* RGMIIDCTL bits */
#define DP83867_RGMII_TX_CLK_DELAY_SHIFT 4
@@ -149,6 +151,7 @@ static int dp83867_config(struct phy_device *phydev)
if (phy_interface_is_rgmii(phydev)) {
ret = phy_write(phydev, MDIO_DEVAD_NONE, MII_DP83867_PHYCTRL,
+ (DP83867_MDI_CROSSOVER_AUTO << DP83867_MDI_CROSSOVER) |
(FIFO_DEPTH << DP83867_PHYCR_FIFO_DEPTH_SHIFT));
if (ret)
return ret;
diff --git a/drivers/net/xilinx_axi_emac.c b/drivers/net/xilinx_axi_emac.c
index df053feee8c8b2de3df918d91ee1def1e2fa6403..81274ee13bca869567ecc3986f4f90fe8c071f7d 100644
--- a/drivers/net/xilinx_axi_emac.c
+++ b/drivers/net/xilinx_axi_emac.c
@@ -8,15 +8,14 @@
#include <config.h>
#include <common.h>
+#include <dm.h>
#include <net.h>
#include <malloc.h>
#include <asm/io.h>
#include <phy.h>
#include <miiphy.h>
-#if !defined(CONFIG_PHYLIB)
-# error AXI_ETHERNET requires PHYLIB
-#endif
+DECLARE_GLOBAL_DATA_PTR;
/* Link setup */
#define XAE_EMMC_LINKSPEED_MASK 0xC0000000 /* Link speed */
@@ -86,7 +85,8 @@ struct axidma_priv {
struct axidma_reg *dmatx;
struct axidma_reg *dmarx;
int phyaddr;
-
+ struct axi_regs *iobase;
+ phy_interface_t interface;
struct phy_device *phydev;
struct mii_dev *bus;
};
@@ -147,9 +147,8 @@ struct axi_regs {
*/
#define PHY_DETECT_MASK 0x1808
-static inline int mdio_wait(struct eth_device *dev)
+static inline int mdio_wait(struct axi_regs *regs)
{
- struct axi_regs *regs = (struct axi_regs *)dev->iobase;
u32 timeout = 200;
/* Wait till MDIO interface is ready to accept a new transaction. */
@@ -165,13 +164,13 @@ static inline int mdio_wait(struct eth_device *dev)
return 0;
}
-static u32 phyread(struct eth_device *dev, u32 phyaddress, u32 registernum,
- u16 *val)
+static u32 phyread(struct axidma_priv *priv, u32 phyaddress, u32 registernum,
+ u16 *val)
{
- struct axi_regs *regs = (struct axi_regs *)dev->iobase;
+ struct axi_regs *regs = priv->iobase;
u32 mdioctrlreg = 0;
- if (mdio_wait(dev))
+ if (mdio_wait(regs))
return 1;
mdioctrlreg = ((phyaddress << XAE_MDIO_MCR_PHYAD_SHIFT) &
@@ -183,7 +182,7 @@ static u32 phyread(struct eth_device *dev, u32 phyaddress, u32 registernum,
out_be32(®s->mdio_mcr, mdioctrlreg);
- if (mdio_wait(dev))
+ if (mdio_wait(regs))
return 1;
/* Read data */
@@ -191,13 +190,13 @@ static u32 phyread(struct eth_device *dev, u32 phyaddress, u32 registernum,
return 0;
}
-static u32 phywrite(struct eth_device *dev, u32 phyaddress, u32 registernum,
- u32 data)
+static u32 phywrite(struct axidma_priv *priv, u32 phyaddress, u32 registernum,
+ u32 data)
{
- struct axi_regs *regs = (struct axi_regs *)dev->iobase;
+ struct axi_regs *regs = priv->iobase;
u32 mdioctrlreg = 0;
- if (mdio_wait(dev))
+ if (mdio_wait(regs))
return 1;
mdioctrlreg = ((phyaddress << XAE_MDIO_MCR_PHYAD_SHIFT) &
@@ -212,19 +211,18 @@ static u32 phywrite(struct eth_device *dev, u32 phyaddress, u32 registernum,
out_be32(®s->mdio_mcr, mdioctrlreg);
- if (mdio_wait(dev))
+ if (mdio_wait(regs))
return 1;
return 0;
}
-/* Setting axi emac and phy to proper setting */
-static int setup_phy(struct eth_device *dev)
+static int axiemac_phy_init(struct udevice *dev)
{
u16 phyreg;
- u32 i, speed, emmc_reg, ret;
- struct axidma_priv *priv = dev->priv;
- struct axi_regs *regs = (struct axi_regs *)dev->iobase;
+ u32 i, ret;
+ struct axidma_priv *priv = dev_get_priv(dev);
+ struct axi_regs *regs = priv->iobase;
struct phy_device *phydev;
u32 supported = SUPPORTED_10baseT_Half |
@@ -234,16 +232,19 @@ static int setup_phy(struct eth_device *dev)
SUPPORTED_1000baseT_Half |
SUPPORTED_1000baseT_Full;
+ /* Set default MDIO divisor */
+ out_be32(®s->mdio_mc, XAE_MDIO_DIV_DFT | XAE_MDIO_MC_MDIOEN_MASK);
+
if (priv->phyaddr == -1) {
/* Detect the PHY address */
for (i = 31; i >= 0; i--) {
- ret = phyread(dev, i, PHY_DETECT_REG, &phyreg);
+ ret = phyread(priv, i, PHY_DETECT_REG, &phyreg);
if (!ret && (phyreg != 0xFFFF) &&
((phyreg & PHY_DETECT_MASK) == PHY_DETECT_MASK)) {
/* Found a valid PHY address */
priv->phyaddr = i;
debug("axiemac: Found valid phy address, %x\n",
- phyreg);
+ i);
break;
}
}
@@ -256,6 +257,18 @@ static int setup_phy(struct eth_device *dev)
phydev->advertising = phydev->supported;
priv->phydev = phydev;
phy_config(phydev);
+
+ return 0;
+}
+
+/* Setting axi emac and phy to proper setting */
+static int setup_phy(struct udevice *dev)
+{
+ u32 speed, emmc_reg;
+ struct axidma_priv *priv = dev_get_priv(dev);
+ struct axi_regs *regs = priv->iobase;
+ struct phy_device *phydev = priv->phydev;
+
if (phy_startup(phydev)) {
printf("axiemac: could not initialize PHY %s\n",
phydev->dev->name);
@@ -299,9 +312,9 @@ static int setup_phy(struct eth_device *dev)
}
/* STOP DMA transfers */
-static void axiemac_halt(struct eth_device *dev)
+static void axiemac_stop(struct udevice *dev)
{
- struct axidma_priv *priv = dev->priv;
+ struct axidma_priv *priv = dev_get_priv(dev);
u32 temp;
/* Stop the hardware */
@@ -316,9 +329,9 @@ static void axiemac_halt(struct eth_device *dev)
debug("axiemac: Halted\n");
}
-static int axi_ethernet_init(struct eth_device *dev)
+static int axi_ethernet_init(struct axidma_priv *priv)
{
- struct axi_regs *regs = (struct axi_regs *)dev->iobase;
+ struct axi_regs *regs = priv->iobase;
u32 timeout = 200;
/*
@@ -359,25 +372,26 @@ static int axi_ethernet_init(struct eth_device *dev)
return 0;
}
-static int axiemac_setup_mac(struct eth_device *dev)
+static int axiemac_write_hwaddr(struct udevice *dev)
{
- struct axi_regs *regs = (struct axi_regs *)dev->iobase;
+ struct eth_pdata *pdata = dev_get_platdata(dev);
+ struct axidma_priv *priv = dev_get_priv(dev);
+ struct axi_regs *regs = priv->iobase;
/* Set the MAC address */
- int val = ((dev->enetaddr[3] << 24) | (dev->enetaddr[2] << 16) |
- (dev->enetaddr[1] << 8) | (dev->enetaddr[0]));
+ int val = ((pdata->enetaddr[3] << 24) | (pdata->enetaddr[2] << 16) |
+ (pdata->enetaddr[1] << 8) | (pdata->enetaddr[0]));
out_be32(®s->uaw0, val);
- val = (dev->enetaddr[5] << 8) | dev->enetaddr[4] ;
+ val = (pdata->enetaddr[5] << 8) | pdata->enetaddr[4];
val |= in_be32(®s->uaw1) & ~XAE_UAW1_UNICASTADDR_MASK;
out_be32(®s->uaw1, val);
return 0;
}
/* Reset DMA engine */
-static void axi_dma_init(struct eth_device *dev)
+static void axi_dma_init(struct axidma_priv *priv)
{
- struct axidma_priv *priv = dev->priv;
u32 timeout = 500;
/* Reset the engine so the hardware starts from a known state */
@@ -388,9 +402,9 @@ static void axi_dma_init(struct eth_device *dev)
while (timeout--) {
/* Check transmit/receive channel */
/* Reset is done when the reset bit is low */
- if (!(in_be32(&priv->dmatx->control) |
+ if (!((in_be32(&priv->dmatx->control) |
in_be32(&priv->dmarx->control))
- & XAXIDMA_CR_RESET_MASK) {
+ & XAXIDMA_CR_RESET_MASK)) {
break;
}
}
@@ -398,10 +412,10 @@ static void axi_dma_init(struct eth_device *dev)
printf("%s: Timeout\n", __func__);
}
-static int axiemac_init(struct eth_device *dev, bd_t * bis)
+static int axiemac_start(struct udevice *dev)
{
- struct axidma_priv *priv = dev->priv;
- struct axi_regs *regs = (struct axi_regs *)dev->iobase;
+ struct axidma_priv *priv = dev_get_priv(dev);
+ struct axi_regs *regs = priv->iobase;
u32 temp;
debug("axiemac: Init started\n");
@@ -411,10 +425,10 @@ static int axiemac_init(struct eth_device *dev, bd_t * bis)
* reset, and since AXIDMA reset line is connected to AxiEthernet, this
* would ensure a reset of AxiEthernet.
*/
- axi_dma_init(dev);
+ axi_dma_init(priv);
/* Initialize AxiEthernet hardware. */
- if (axi_ethernet_init(dev))
+ if (axi_ethernet_init(priv))
return -1;
/* Disable all RX interrupts before RxBD space setup */
@@ -452,7 +466,7 @@ static int axiemac_init(struct eth_device *dev, bd_t * bis)
/* PHY setup */
if (!setup_phy(dev)) {
- axiemac_halt(dev);
+ axiemac_stop(dev);
return -1;
}
@@ -460,9 +474,9 @@ static int axiemac_init(struct eth_device *dev, bd_t * bis)
return 0;
}
-static int axiemac_send(struct eth_device *dev, void *ptr, int len)
+static int axiemac_send(struct udevice *dev, void *ptr, int len)
{
- struct axidma_priv *priv = dev->priv;
+ struct axidma_priv *priv = dev_get_priv(dev);
u32 timeout;
if (len > PKTSIZE_ALIGN)
@@ -498,8 +512,8 @@ static int axiemac_send(struct eth_device *dev, void *ptr, int len)
/* Wait for transmission to complete */
debug("axiemac: Waiting for tx to be done\n");
timeout = 200;
- while (timeout && (!in_be32(&priv->dmatx->status) &
- (XAXIDMA_IRQ_DELAY_MASK | XAXIDMA_IRQ_IOC_MASK))) {
+ while (timeout && (!(in_be32(&priv->dmatx->status) &
+ (XAXIDMA_IRQ_DELAY_MASK | XAXIDMA_IRQ_IOC_MASK)))) {
timeout--;
udelay(1);
}
@@ -512,10 +526,9 @@ static int axiemac_send(struct eth_device *dev, void *ptr, int len)
return 0;
}
-static int isrxready(struct eth_device *dev)
+static int isrxready(struct axidma_priv *priv)
{
u32 status;
- struct axidma_priv *priv = dev->priv;
/* Read pending interrupts */
status = in_be32(&priv->dmarx->status);
@@ -533,15 +546,15 @@ static int isrxready(struct eth_device *dev)
return 0;
}
-static int axiemac_recv(struct eth_device *dev)
+static int axiemac_recv(struct udevice *dev, int flags, uchar **packetp)
{
u32 length;
- struct axidma_priv *priv = dev->priv;
+ struct axidma_priv *priv = dev_get_priv(dev);
u32 temp;
/* Wait for an incoming packet */
- if (!isrxready(dev))
- return 0;
+ if (!isrxready(priv))
+ return -1;
debug("axiemac: RX data ready\n");
@@ -554,9 +567,14 @@ static int axiemac_recv(struct eth_device *dev)
#ifdef DEBUG
print_buffer(&rxframe, &rxframe[0], 1, length, 16);
#endif
- /* Pass the received frame up for processing */
- if (length)
- net_process_received_packet(rxframe, length);
+
+ *packetp = rxframe;
+ return length;
+}
+
+static int axiemac_free_pkt(struct udevice *dev, uchar *packet, int length)
+{
+ struct axidma_priv *priv = dev_get_priv(dev);
#ifdef DEBUG
/* It is useful to clear buffer to be sure that it is consistent */
@@ -581,76 +599,128 @@ static int axiemac_recv(struct eth_device *dev)
debug("axiemac: RX completed, framelength = %d\n", length);
- return length;
+ return 0;
}
-static int axiemac_miiphy_read(const char *devname, uchar addr,
- uchar reg, ushort *val)
+static int axiemac_miiphy_read(struct mii_dev *bus, int addr,
+ int devad, int reg)
{
- struct eth_device *dev = eth_get_dev();
- u32 ret;
+ int ret;
+ u16 value;
- ret = phyread(dev, addr, reg, val);
- debug("axiemac: Read MII 0x%x, 0x%x, 0x%x\n", addr, reg, *val);
- return ret;
+ ret = phyread(bus->priv, addr, reg, &value);
+ debug("axiemac: Read MII 0x%x, 0x%x, 0x%x, %d\n", addr, reg,
+ value, ret);
+ return value;
}
-static int axiemac_miiphy_write(const char *devname, uchar addr,
- uchar reg, ushort val)
+static int axiemac_miiphy_write(struct mii_dev *bus, int addr, int devad,
+ int reg, u16 value)
{
- struct eth_device *dev = eth_get_dev();
-
- debug("axiemac: Write MII 0x%x, 0x%x, 0x%x\n", addr, reg, val);
- return phywrite(dev, addr, reg, val);
+ debug("axiemac: Write MII 0x%x, 0x%x, 0x%x\n", addr, reg, value);
+ return phywrite(bus->priv, addr, reg, value);
}
-static int axiemac_bus_reset(struct mii_dev *bus)
+static int axi_emac_probe(struct udevice *dev)
{
- debug("axiemac: Bus reset\n");
+ struct axidma_priv *priv = dev_get_priv(dev);
+ int ret;
+
+ priv->bus = mdio_alloc();
+ priv->bus->read = axiemac_miiphy_read;
+ priv->bus->write = axiemac_miiphy_write;
+ priv->bus->priv = priv;
+ strcpy(priv->bus->name, "axi_emac");
+
+ ret = mdio_register(priv->bus);
+ if (ret)
+ return ret;
+
+ axiemac_phy_init(dev);
+
return 0;
}
-int xilinx_axiemac_initialize(bd_t *bis, unsigned long base_addr,
- unsigned long dma_addr)
+static int axi_emac_remove(struct udevice *dev)
{
- struct eth_device *dev;
- struct axidma_priv *priv;
+ struct axidma_priv *priv = dev_get_priv(dev);
- dev = calloc(1, sizeof(struct eth_device));
- if (dev == NULL)
- return -1;
+ free(priv->phydev);
+ mdio_unregister(priv->bus);
+ mdio_free(priv->bus);
- dev->priv = calloc(1, sizeof(struct axidma_priv));
- if (dev->priv == NULL) {
- free(dev);
- return -1;
- }
- priv = dev->priv;
+ return 0;
+}
- sprintf(dev->name, "aximac.%lx", base_addr);
+static const struct eth_ops axi_emac_ops = {
+ .start = axiemac_start,
+ .send = axiemac_send,
+ .recv = axiemac_recv,
+ .free_pkt = axiemac_free_pkt,
+ .stop = axiemac_stop,
+ .write_hwaddr = axiemac_write_hwaddr,
+};
- dev->iobase = base_addr;
- priv->dmatx = (struct axidma_reg *)dma_addr;
+static int axi_emac_ofdata_to_platdata(struct udevice *dev)
+{
+ struct eth_pdata *pdata = dev_get_platdata(dev);
+ struct axidma_priv *priv = dev_get_priv(dev);
+ int offset = 0;
+ const char *phy_mode;
+
+ pdata->iobase = (phys_addr_t)dev_get_addr(dev);
+ priv->iobase = (struct axi_regs *)pdata->iobase;
+
+ offset = fdtdec_lookup_phandle(gd->fdt_blob, dev->of_offset,
+ "axistream-connected");
+ if (offset <= 0) {
+ printf("%s: axistream is not found\n", __func__);
+ return -EINVAL;
+ }
+ priv->dmatx = (struct axidma_reg *)fdtdec_get_int(gd->fdt_blob,
+ offset, "reg", 0);
+ if (!priv->dmatx) {
+ printf("%s: axi_dma register space not found\n", __func__);
+ return -EINVAL;
+ }
/* RX channel offset is 0x30 */
- priv->dmarx = (struct axidma_reg *)(dma_addr + 0x30);
- dev->init = axiemac_init;
- dev->halt = axiemac_halt;
- dev->send = axiemac_send;
- dev->recv = axiemac_recv;
- dev->write_hwaddr = axiemac_setup_mac;
-
-#ifdef CONFIG_PHY_ADDR
- priv->phyaddr = CONFIG_PHY_ADDR;
-#else
+ priv->dmarx = (struct axidma_reg *)((u32)priv->dmatx + 0x30);
+
priv->phyaddr = -1;
-#endif
- eth_register(dev);
+ offset = fdtdec_lookup_phandle(gd->fdt_blob, dev->of_offset,
+ "phy-handle");
+ if (offset > 0)
+ priv->phyaddr = fdtdec_get_int(gd->fdt_blob, offset, "reg", -1);
+
+ phy_mode = fdt_getprop(gd->fdt_blob, dev->of_offset, "phy-mode", NULL);
+ if (phy_mode)
+ pdata->phy_interface = phy_get_interface_by_name(phy_mode);
+ if (pdata->phy_interface == -1) {
+ debug("%s: Invalid PHY interface '%s'\n", __func__, phy_mode);
+ return -EINVAL;
+ }
+ priv->interface = pdata->phy_interface;
+
+ printf("AXI EMAC: %lx, phyaddr %d, interface %s\n", (ulong)priv->iobase,
+ priv->phyaddr, phy_string_for_interface(priv->interface));
-#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) || defined(CONFIG_PHYLIB)
- miiphy_register(dev->name, axiemac_miiphy_read, axiemac_miiphy_write);
- priv->bus = miiphy_get_dev_by_name(dev->name);
- priv->bus->reset = axiemac_bus_reset;
-#endif
- return 1;
+ return 0;
}
+
+static const struct udevice_id axi_emac_ids[] = {
+ { .compatible = "xlnx,axi-ethernet-1.00.a" },
+ { }
+};
+
+U_BOOT_DRIVER(axi_emac) = {
+ .name = "axi_emac",
+ .id = UCLASS_ETH,
+ .of_match = axi_emac_ids,
+ .ofdata_to_platdata = axi_emac_ofdata_to_platdata,
+ .probe = axi_emac_probe,
+ .remove = axi_emac_remove,
+ .ops = &axi_emac_ops,
+ .priv_auto_alloc_size = sizeof(struct axidma_priv),
+ .platdata_auto_alloc_size = sizeof(struct eth_pdata),
+};
diff --git a/drivers/net/xilinx_emaclite.c b/drivers/net/xilinx_emaclite.c
index 564205df83d39532f378bd0d5f32ad4e2c632b04..5862bf0a7e2d4d34d40ac4dbafab10c636b0d15c 100644
--- a/drivers/net/xilinx_emaclite.c
+++ b/drivers/net/xilinx_emaclite.c
@@ -10,27 +10,25 @@
#include <common.h>
#include <net.h>
#include <config.h>
+#include <dm.h>
+#include <console.h>
#include <malloc.h>
#include <asm/io.h>
+#include <phy.h>
+#include <miiphy.h>
#include <fdtdec.h>
+#include <asm-generic/errno.h>
+#include <linux/kernel.h>
-#undef DEBUG
+DECLARE_GLOBAL_DATA_PTR;
#define ENET_ADDR_LENGTH 6
-
-/* EmacLite constants */
-#define XEL_BUFFER_OFFSET 0x0800 /* Next buffer's offset */
-#define XEL_TPLR_OFFSET 0x07F4 /* Tx packet length */
-#define XEL_TSR_OFFSET 0x07FC /* Tx status */
-#define XEL_RSR_OFFSET 0x17FC /* Rx status */
-#define XEL_RXBUFF_OFFSET 0x1000 /* Receive Buffer */
+#define ETH_FCS_LEN 4 /* Octets in the FCS */
/* Xmit complete */
#define XEL_TSR_XMIT_BUSY_MASK 0x00000001UL
/* Xmit interrupt enable bit */
#define XEL_TSR_XMIT_IE_MASK 0x00000008UL
-/* Buffer is active, SW bit only */
-#define XEL_TSR_XMIT_ACTIVE_MASK 0x80000000UL
/* Program the MAC address */
#define XEL_TSR_PROGRAM_MASK 0x00000002UL
/* define for programming the MAC address into the EMAC Lite */
@@ -46,14 +44,56 @@
/* Recv interrupt enable bit */
#define XEL_RSR_RECV_IE_MASK 0x00000008UL
+/* MDIO Address Register Bit Masks */
+#define XEL_MDIOADDR_REGADR_MASK 0x0000001F /* Register Address */
+#define XEL_MDIOADDR_PHYADR_MASK 0x000003E0 /* PHY Address */
+#define XEL_MDIOADDR_PHYADR_SHIFT 5
+#define XEL_MDIOADDR_OP_MASK 0x00000400 /* RD/WR Operation */
+
+/* MDIO Write Data Register Bit Masks */
+#define XEL_MDIOWR_WRDATA_MASK 0x0000FFFF /* Data to be Written */
+
+/* MDIO Read Data Register Bit Masks */
+#define XEL_MDIORD_RDDATA_MASK 0x0000FFFF /* Data to be Read */
+
+/* MDIO Control Register Bit Masks */
+#define XEL_MDIOCTRL_MDIOSTS_MASK 0x00000001 /* MDIO Status Mask */
+#define XEL_MDIOCTRL_MDIOEN_MASK 0x00000008 /* MDIO Enable */
+
+struct emaclite_regs {
+ u32 tx_ping; /* 0x0 - TX Ping buffer */
+ u32 reserved1[504];
+ u32 mdioaddr; /* 0x7e4 - MDIO Address Register */
+ u32 mdiowr; /* 0x7e8 - MDIO Write Data Register */
+ u32 mdiord;/* 0x7ec - MDIO Read Data Register */
+ u32 mdioctrl; /* 0x7f0 - MDIO Control Register */
+ u32 tx_ping_tplr; /* 0x7f4 - Tx packet length */
+ u32 global_interrupt; /* 0x7f8 - Global interrupt enable */
+ u32 tx_ping_tsr; /* 0x7fc - Tx status */
+ u32 tx_pong; /* 0x800 - TX Pong buffer */
+ u32 reserved2[508];
+ u32 tx_pong_tplr; /* 0xff4 - Tx packet length */
+ u32 reserved3; /* 0xff8 */
+ u32 tx_pong_tsr; /* 0xffc - Tx status */
+ u32 rx_ping; /* 0x1000 - Receive Buffer */
+ u32 reserved4[510];
+ u32 rx_ping_rsr; /* 0x17fc - Rx status */
+ u32 rx_pong; /* 0x1800 - Receive Buffer */
+ u32 reserved5[510];
+ u32 rx_pong_rsr; /* 0x1ffc - Rx status */
+};
+
struct xemaclite {
- u32 nexttxbuffertouse; /* Next TX buffer to write to */
- u32 nextrxbuffertouse; /* Next RX buffer to read from */
+ bool use_rx_pong_buffer_next; /* Next RX buffer to read from */
u32 txpp; /* TX ping pong buffer */
u32 rxpp; /* RX ping pong buffer */
+ int phyaddr;
+ struct emaclite_regs *regs;
+ struct phy_device *phydev;
+ struct mii_dev *bus;
};
-static u32 etherrxbuff[PKTSIZE_ALIGN/4]; /* Receive buffer */
+static uchar etherrxbuff[PKTSIZE_ALIGN]; /* Receive buffer */
static void xemaclite_alignedread(u32 *srcptr, void *destptr, u32 bytecount)
{
@@ -81,7 +121,7 @@ static void xemaclite_alignedread(u32 *srcptr, void *destptr, u32 bytecount)
*to8ptr++ = *from8ptr++;
}
-static void xemaclite_alignedwrite(void *srcptr, u32 destptr, u32 bytecount)
+static void xemaclite_alignedwrite(void *srcptr, u32 *destptr, u32 bytecount)
{
u32 i;
u32 alignbuffer;
@@ -107,42 +147,206 @@ static void xemaclite_alignedwrite(void *srcptr, u32 destptr, u32 bytecount)
*to32ptr++ = alignbuffer;
}
-static void emaclite_halt(struct eth_device *dev)
+static int wait_for_bit(const char *func, u32 *reg, const u32 mask,
+ bool set, unsigned int timeout)
+{
+ u32 val;
+ unsigned long start = get_timer(0);
+
+ while (1) {
+ val = readl(reg);
+
+ if (!set)
+ val = ~val;
+
+ if ((val & mask) == mask)
+ return 0;
+
+ if (get_timer(start) > timeout)
+ break;
+
+ if (ctrlc()) {
+ puts("Abort\n");
+ return -EINTR;
+ }
+
+ udelay(1);
+ }
+
+ debug("%s: Timeout (reg=%p mask=%08x wait_set=%i)\n",
+ func, reg, mask, set);
+
+ return -ETIMEDOUT;
+}
+
+static int mdio_wait(struct emaclite_regs *regs)
{
- debug("eth_halt\n");
+ return wait_for_bit(__func__, ®s->mdioctrl,
+ XEL_MDIOCTRL_MDIOSTS_MASK, false, 2000);
}
-static int emaclite_init(struct eth_device *dev, bd_t *bis)
+static u32 phyread(struct xemaclite *emaclite, u32 phyaddress, u32 registernum,
+ u16 *data)
{
- struct xemaclite *emaclite = dev->priv;
+ struct emaclite_regs *regs = emaclite->regs;
+
+ if (mdio_wait(regs))
+ return 1;
+
+ u32 ctrl_reg = in_be32(®s->mdioctrl);
+ out_be32(®s->mdioaddr, XEL_MDIOADDR_OP_MASK |
+ ((phyaddress << XEL_MDIOADDR_PHYADR_SHIFT) | registernum));
+ out_be32(®s->mdioctrl, ctrl_reg | XEL_MDIOCTRL_MDIOSTS_MASK);
+
+ if (mdio_wait(regs))
+ return 1;
+
+ /* Read data */
+ *data = in_be32(®s->mdiord);
+ return 0;
+}
+
+static u32 phywrite(struct xemaclite *emaclite, u32 phyaddress, u32 registernum,
+ u16 data)
+{
+ struct emaclite_regs *regs = emaclite->regs;
+
+ if (mdio_wait(regs))
+ return 1;
+
+ /*
+ * Write the PHY address, register number and clear the OP bit in the
+ * MDIO Address register and then write the value into the MDIO Write
+ * Data register. Finally, set the Status bit in the MDIO Control
+ * register to start a MDIO write transaction.
+ */
+ u32 ctrl_reg = in_be32(®s->mdioctrl);
+ out_be32(®s->mdioaddr, ~XEL_MDIOADDR_OP_MASK &
+ ((phyaddress << XEL_MDIOADDR_PHYADR_SHIFT) | registernum));
+ out_be32(®s->mdiowr, data);
+ out_be32(®s->mdioctrl, ctrl_reg | XEL_MDIOCTRL_MDIOSTS_MASK);
+
+ if (mdio_wait(regs))
+ return 1;
+
+ return 0;
+}
+
+static void emaclite_stop(struct udevice *dev)
+{
+ debug("eth_stop\n");
+}
+
+/* Use MII register 1 (MII status register) to detect PHY */
+#define PHY_DETECT_REG 1
+
+/* Mask used to verify certain PHY features (or register contents)
+ * in the register above:
+ * 0x1000: 10Mbps full duplex support
+ * 0x0800: 10Mbps half duplex support
+ * 0x0008: Auto-negotiation support
+ */
+#define PHY_DETECT_MASK 0x1808
+
+static int setup_phy(struct udevice *dev)
+{
+ int i;
+ u16 phyreg;
+ struct xemaclite *emaclite = dev_get_priv(dev);
+ struct phy_device *phydev;
+
+ u32 supported = SUPPORTED_10baseT_Half |
+ SUPPORTED_10baseT_Full |
+ SUPPORTED_100baseT_Half |
+ SUPPORTED_100baseT_Full;
+
+ if (emaclite->phyaddr != -1) {
+ phyread(emaclite, emaclite->phyaddr, PHY_DETECT_REG, &phyreg);
+ if ((phyreg != 0xFFFF) &&
+ ((phyreg & PHY_DETECT_MASK) == PHY_DETECT_MASK)) {
+ /* Found a valid PHY address */
+ debug("Default phy address %d is valid\n",
+ emaclite->phyaddr);
+ } else {
+ debug("PHY address is not setup correctly %d\n",
+ emaclite->phyaddr);
+ emaclite->phyaddr = -1;
+ }
+ }
+
+ if (emaclite->phyaddr == -1) {
+ /* detect the PHY address */
+ for (i = 31; i >= 0; i--) {
+ phyread(emaclite, i, PHY_DETECT_REG, &phyreg);
+ if ((phyreg != 0xFFFF) &&
+ ((phyreg & PHY_DETECT_MASK) == PHY_DETECT_MASK)) {
+ /* Found a valid PHY address */
+ emaclite->phyaddr = i;
+ debug("emaclite: Found valid phy address, %d\n",
+ i);
+ break;
+ }
+ }
+ }
+
+ /* interface - look at tsec */
+ phydev = phy_connect(emaclite->bus, emaclite->phyaddr, dev,
+ PHY_INTERFACE_MODE_MII);
+ /*
+ * Phy can support 1000baseT but device NOT that's why phydev->supported
+ * must be setup for 1000baseT. phydev->advertising setups what speeds
+ * will be used for autonegotiation where 1000baseT must be disabled.
+ */
+ phydev->supported = supported | SUPPORTED_1000baseT_Half |
+ SUPPORTED_1000baseT_Full;
+ phydev->advertising = supported;
+ emaclite->phydev = phydev;
+ phy_config(phydev);
+ phy_startup(phydev);
+
+ if (!phydev->link) {
+ printf("%s: No link.\n", phydev->dev->name);
+ return 0;
+ }
+
+ /* Do not setup anything */
+ return 1;
+}
+
+static int emaclite_start(struct udevice *dev)
+{
+ struct xemaclite *emaclite = dev_get_priv(dev);
+ struct eth_pdata *pdata = dev_get_platdata(dev);
+ struct emaclite_regs *regs = emaclite->regs;
+
debug("EmacLite Initialization Started\n");
/*
* TX - TX_PING & TX_PONG initialization
*/
/* Restart PING TX */
- out_be32 (dev->iobase + XEL_TSR_OFFSET, 0);
+ out_be32(®s->tx_ping_tsr, 0);
/* Copy MAC address */
- xemaclite_alignedwrite(dev->enetaddr, dev->iobase, ENET_ADDR_LENGTH);
+ xemaclite_alignedwrite(pdata->enetaddr, ®s->tx_ping,
+ ENET_ADDR_LENGTH);
/* Set the length */
- out_be32 (dev->iobase + XEL_TPLR_OFFSET, ENET_ADDR_LENGTH);
+ out_be32(®s->tx_ping_tplr, ENET_ADDR_LENGTH);
/* Update the MAC address in the EMAC Lite */
- out_be32 (dev->iobase + XEL_TSR_OFFSET, XEL_TSR_PROG_MAC_ADDR);
+ out_be32(®s->tx_ping_tsr, XEL_TSR_PROG_MAC_ADDR);
/* Wait for EMAC Lite to finish with the MAC address update */
- while ((in_be32 (dev->iobase + XEL_TSR_OFFSET) &
+ while ((in_be32 (®s->tx_ping_tsr) &
XEL_TSR_PROG_MAC_ADDR) != 0)
;
if (emaclite->txpp) {
/* The same operation with PONG TX */
- out_be32 (dev->iobase + XEL_TSR_OFFSET + XEL_BUFFER_OFFSET, 0);
- xemaclite_alignedwrite(dev->enetaddr, dev->iobase +
- XEL_BUFFER_OFFSET, ENET_ADDR_LENGTH);
- out_be32 (dev->iobase + XEL_TPLR_OFFSET, ENET_ADDR_LENGTH);
- out_be32 (dev->iobase + XEL_TSR_OFFSET + XEL_BUFFER_OFFSET,
- XEL_TSR_PROG_MAC_ADDR);
- while ((in_be32 (dev->iobase + XEL_TSR_OFFSET +
- XEL_BUFFER_OFFSET) & XEL_TSR_PROG_MAC_ADDR) != 0)
+ out_be32(®s->tx_pong_tsr, 0);
+ xemaclite_alignedwrite(pdata->enetaddr, ®s->tx_pong,
+ ENET_ADDR_LENGTH);
+ out_be32(®s->tx_pong_tplr, ENET_ADDR_LENGTH);
+ out_be32(®s->tx_pong_tsr, XEL_TSR_PROG_MAC_ADDR);
+ while ((in_be32(®s->tx_pong_tsr) &
+ XEL_TSR_PROG_MAC_ADDR) != 0)
;
}
@@ -150,52 +354,48 @@ static int emaclite_init(struct eth_device *dev, bd_t *bis)
* RX - RX_PING & RX_PONG initialization
*/
/* Write out the value to flush the RX buffer */
- out_be32 (dev->iobase + XEL_RSR_OFFSET, XEL_RSR_RECV_IE_MASK);
+ out_be32(®s->rx_ping_rsr, XEL_RSR_RECV_IE_MASK);
if (emaclite->rxpp)
- out_be32 (dev->iobase + XEL_RSR_OFFSET + XEL_BUFFER_OFFSET,
- XEL_RSR_RECV_IE_MASK);
+ out_be32(®s->rx_pong_rsr, XEL_RSR_RECV_IE_MASK);
+
+ out_be32(®s->mdioctrl, XEL_MDIOCTRL_MDIOEN_MASK);
+ if (in_be32(®s->mdioctrl) & XEL_MDIOCTRL_MDIOEN_MASK)
+ if (!setup_phy(dev))
+ return -1;
debug("EmacLite Initialization complete\n");
return 0;
}
-static int xemaclite_txbufferavailable(struct eth_device *dev)
+static int xemaclite_txbufferavailable(struct xemaclite *emaclite)
{
- u32 reg;
- u32 txpingbusy;
- u32 txpongbusy;
- struct xemaclite *emaclite = dev->priv;
+ u32 tmp;
+ struct emaclite_regs *regs = emaclite->regs;
/*
* Read the other buffer register
* and determine if the other buffer is available
*/
- reg = in_be32 (dev->iobase +
- emaclite->nexttxbuffertouse + 0);
- txpingbusy = ((reg & XEL_TSR_XMIT_BUSY_MASK) ==
- XEL_TSR_XMIT_BUSY_MASK);
-
- reg = in_be32 (dev->iobase +
- (emaclite->nexttxbuffertouse ^ XEL_TSR_OFFSET) + 0);
- txpongbusy = ((reg & XEL_TSR_XMIT_BUSY_MASK) ==
- XEL_TSR_XMIT_BUSY_MASK);
+ tmp = ~in_be32(®s->tx_ping_tsr);
+ if (emaclite->txpp)
+ tmp |= ~in_be32(®s->tx_pong_tsr);
- return !(txpingbusy && txpongbusy);
+ return !(tmp & XEL_TSR_XMIT_BUSY_MASK);
}
-static int emaclite_send(struct eth_device *dev, void *ptr, int len)
+static int emaclite_send(struct udevice *dev, void *ptr, int len)
{
u32 reg;
- u32 baseaddress;
- struct xemaclite *emaclite = dev->priv;
+ struct xemaclite *emaclite = dev_get_priv(dev);
+ struct emaclite_regs *regs = emaclite->regs;
u32 maxtry = 1000;
if (len > PKTSIZE)
len = PKTSIZE;
- while (!xemaclite_txbufferavailable(dev) && maxtry) {
+ while (xemaclite_txbufferavailable(emaclite) && maxtry) {
udelay(10);
maxtry--;
}
@@ -203,58 +403,40 @@ static int emaclite_send(struct eth_device *dev, void *ptr, int len)
if (!maxtry) {
printf("Error: Timeout waiting for ethernet TX buffer\n");
/* Restart PING TX */
- out_be32 (dev->iobase + XEL_TSR_OFFSET, 0);
+ out_be32(®s->tx_ping_tsr, 0);
if (emaclite->txpp) {
- out_be32 (dev->iobase + XEL_TSR_OFFSET +
- XEL_BUFFER_OFFSET, 0);
+ out_be32(®s->tx_pong_tsr, 0);
}
return -1;
}
- /* Determine the expected TX buffer address */
- baseaddress = (dev->iobase + emaclite->nexttxbuffertouse);
-
/* Determine if the expected buffer address is empty */
- reg = in_be32 (baseaddress + XEL_TSR_OFFSET);
- if (((reg & XEL_TSR_XMIT_BUSY_MASK) == 0)
- && ((in_be32 ((baseaddress) + XEL_TSR_OFFSET)
- & XEL_TSR_XMIT_ACTIVE_MASK) == 0)) {
-
- if (emaclite->txpp)
- emaclite->nexttxbuffertouse ^= XEL_BUFFER_OFFSET;
-
- debug("Send packet from 0x%x\n", baseaddress);
+ reg = in_be32(®s->tx_ping_tsr);
+ if ((reg & XEL_TSR_XMIT_BUSY_MASK) == 0) {
+ debug("Send packet from tx_ping buffer\n");
/* Write the frame to the buffer */
- xemaclite_alignedwrite(ptr, baseaddress, len);
- out_be32 (baseaddress + XEL_TPLR_OFFSET,(len &
- (XEL_TPLR_LENGTH_MASK_HI | XEL_TPLR_LENGTH_MASK_LO)));
- reg = in_be32 (baseaddress + XEL_TSR_OFFSET);
+ xemaclite_alignedwrite(ptr, ®s->tx_ping, len);
+ out_be32(®s->tx_ping_tplr, len &
+ (XEL_TPLR_LENGTH_MASK_HI | XEL_TPLR_LENGTH_MASK_LO));
+ reg = in_be32(®s->tx_ping_tsr);
reg |= XEL_TSR_XMIT_BUSY_MASK;
- if ((reg & XEL_TSR_XMIT_IE_MASK) != 0)
- reg |= XEL_TSR_XMIT_ACTIVE_MASK;
- out_be32 (baseaddress + XEL_TSR_OFFSET, reg);
+ out_be32(®s->tx_ping_tsr, reg);
return 0;
}
if (emaclite->txpp) {
- /* Switch to second buffer */
- baseaddress ^= XEL_BUFFER_OFFSET;
/* Determine if the expected buffer address is empty */
- reg = in_be32 (baseaddress + XEL_TSR_OFFSET);
- if (((reg & XEL_TSR_XMIT_BUSY_MASK) == 0)
- && ((in_be32 ((baseaddress) + XEL_TSR_OFFSET)
- & XEL_TSR_XMIT_ACTIVE_MASK) == 0)) {
- debug("Send packet from 0x%x\n", baseaddress);
+ reg = in_be32(®s->tx_pong_tsr);
+ if ((reg & XEL_TSR_XMIT_BUSY_MASK) == 0) {
+ debug("Send packet from tx_pong buffer\n");
/* Write the frame to the buffer */
- xemaclite_alignedwrite(ptr, baseaddress, len);
- out_be32 (baseaddress + XEL_TPLR_OFFSET, (len &
- (XEL_TPLR_LENGTH_MASK_HI |
- XEL_TPLR_LENGTH_MASK_LO)));
- reg = in_be32 (baseaddress + XEL_TSR_OFFSET);
+ xemaclite_alignedwrite(ptr, ®s->tx_pong, len);
+ out_be32(®s->tx_pong_tplr, len &
+ (XEL_TPLR_LENGTH_MASK_HI |
+ XEL_TPLR_LENGTH_MASK_LO));
+ reg = in_be32(®s->tx_pong_tsr);
reg |= XEL_TSR_XMIT_BUSY_MASK;
- if ((reg & XEL_TSR_XMIT_IE_MASK) != 0)
- reg |= XEL_TSR_XMIT_ACTIVE_MASK;
- out_be32 (baseaddress + XEL_TSR_OFFSET, reg);
+ out_be32(®s->tx_pong_tsr, reg);
return 0;
}
}
@@ -263,130 +445,188 @@ static int emaclite_send(struct eth_device *dev, void *ptr, int len)
return -1;
}
-static int emaclite_recv(struct eth_device *dev)
+static int emaclite_recv(struct udevice *dev, int flags, uchar **packetp)
{
- u32 length;
- u32 reg;
- u32 baseaddress;
+ u32 length, first_read, reg, attempt = 0;
+ void *addr, *ack;
struct xemaclite *emaclite = dev->priv;
+ struct emaclite_regs *regs = emaclite->regs;
+ struct ethernet_hdr *eth;
+ struct ip_udp_hdr *ip;
+
+try_again:
+ if (!emaclite->use_rx_pong_buffer_next) {
+ reg = in_be32(®s->rx_ping_rsr);
+ debug("Testing data at rx_ping\n");
+ if ((reg & XEL_RSR_RECV_DONE_MASK) == XEL_RSR_RECV_DONE_MASK) {
+ debug("Data found in rx_ping buffer\n");
+ addr = ®s->rx_ping;
+ ack = ®s->rx_ping_rsr;
+ } else {
+ debug("Data not found in rx_ping buffer\n");
+ /* Pong buffer is not available - return immediately */
+ if (!emaclite->rxpp)
+ return -1;
- baseaddress = dev->iobase + emaclite->nextrxbuffertouse;
- reg = in_be32 (baseaddress + XEL_RSR_OFFSET);
- debug("Testing data at address 0x%x\n", baseaddress);
- if ((reg & XEL_RSR_RECV_DONE_MASK) == XEL_RSR_RECV_DONE_MASK) {
- if (emaclite->rxpp)
- emaclite->nextrxbuffertouse ^= XEL_BUFFER_OFFSET;
+ /* Try pong buffer if this is first attempt */
+ if (attempt++)
+ return -1;
+ emaclite->use_rx_pong_buffer_next =
+ !emaclite->use_rx_pong_buffer_next;
+ goto try_again;
+ }
} else {
-
- if (!emaclite->rxpp) {
- debug("No data was available - address 0x%x\n",
- baseaddress);
- return 0;
+ reg = in_be32(®s->rx_pong_rsr);
+ debug("Testing data at rx_pong\n");
+ if ((reg & XEL_RSR_RECV_DONE_MASK) == XEL_RSR_RECV_DONE_MASK) {
+ debug("Data found in rx_pong buffer\n");
+ addr = ®s->rx_pong;
+ ack = ®s->rx_pong_rsr;
} else {
- baseaddress ^= XEL_BUFFER_OFFSET;
- reg = in_be32 (baseaddress + XEL_RSR_OFFSET);
- if ((reg & XEL_RSR_RECV_DONE_MASK) !=
- XEL_RSR_RECV_DONE_MASK) {
- debug("No data was available - address 0x%x\n",
- baseaddress);
- return 0;
- }
+ debug("Data not found in rx_pong buffer\n");
+ /* Try ping buffer if this is first attempt */
+ if (attempt++)
+ return -1;
+ emaclite->use_rx_pong_buffer_next =
+ !emaclite->use_rx_pong_buffer_next;
+ goto try_again;
}
}
- /* Get the length of the frame that arrived */
- switch(((ntohl(in_be32 (baseaddress + XEL_RXBUFF_OFFSET + 0xC))) &
- 0xFFFF0000 ) >> 16) {
- case 0x806:
- length = 42 + 20; /* FIXME size of ARP */
- debug("ARP Packet\n");
- break;
- case 0x800:
- length = 14 + 14 +
- (((ntohl(in_be32 (baseaddress + XEL_RXBUFF_OFFSET +
- 0x10))) & 0xFFFF0000) >> 16);
- /* FIXME size of IP packet */
- debug ("IP Packet\n");
- break;
- default:
- debug("Other Packet\n");
- length = PKTSIZE;
- break;
+
+ /* Read all bytes for ARP packet with 32bit alignment - 48bytes */
+ first_read = ALIGN(ETHER_HDR_SIZE + ARP_HDR_SIZE + ETH_FCS_LEN, 4);
+ xemaclite_alignedread(addr, etherrxbuff, first_read);
+
+ /* Detect real packet size */
+ eth = (struct ethernet_hdr *)etherrxbuff;
+ switch (ntohs(eth->et_protlen)) {
+ case PROT_ARP:
+ length = first_read;
+ debug("ARP Packet %x\n", length);
+ break;
+ case PROT_IP:
+ ip = (struct ip_udp_hdr *)(etherrxbuff + ETHER_HDR_SIZE);
+ length = ntohs(ip->ip_len);
+ length += ETHER_HDR_SIZE + ETH_FCS_LEN;
+ debug("IP Packet %x\n", length);
+ break;
+ default:
+ debug("Other Packet\n");
+ length = PKTSIZE;
+ break;
}
- xemaclite_alignedread((u32 *) (baseaddress + XEL_RXBUFF_OFFSET),
- etherrxbuff, length);
+ /* Read the rest of the packet which is longer then first read */
+ if (length != first_read)
+ xemaclite_alignedread(addr + first_read,
+ etherrxbuff + first_read,
+ length - first_read);
/* Acknowledge the frame */
- reg = in_be32 (baseaddress + XEL_RSR_OFFSET);
+ reg = in_be32(ack);
reg &= ~XEL_RSR_RECV_DONE_MASK;
- out_be32 (baseaddress + XEL_RSR_OFFSET, reg);
+ out_be32(ack, reg);
- debug("Packet receive from 0x%x, length %dB\n", baseaddress, length);
- net_process_received_packet((uchar *)etherrxbuff, length);
+ debug("Packet receive from 0x%p, length %dB\n", addr, length);
+ *packetp = etherrxbuff;
return length;
-
}
-int xilinx_emaclite_initialize(bd_t *bis, unsigned long base_addr,
- int txpp, int rxpp)
+static int emaclite_miiphy_read(struct mii_dev *bus, int addr,
+ int devad, int reg)
{
- struct eth_device *dev;
- struct xemaclite *emaclite;
+ u32 ret;
+ u16 val = 0;
- dev = calloc(1, sizeof(*dev));
- if (dev == NULL)
- return -1;
+ ret = phyread(bus->priv, addr, reg, &val);
+ debug("emaclite: Read MII 0x%x, 0x%x, 0x%x, %d\n", addr, reg, val, ret);
+ return val;
+}
- emaclite = calloc(1, sizeof(struct xemaclite));
- if (emaclite == NULL) {
- free(dev);
- return -1;
- }
+static int emaclite_miiphy_write(struct mii_dev *bus, int addr, int devad,
+ int reg, u16 value)
+{
+ debug("emaclite: Write MII 0x%x, 0x%x, 0x%x\n", addr, reg, value);
+ return phywrite(bus->priv, addr, reg, value);
+}
+
+static int emaclite_probe(struct udevice *dev)
+{
+ struct xemaclite *emaclite = dev_get_priv(dev);
+ int ret;
- dev->priv = emaclite;
+ emaclite->bus = mdio_alloc();
+ emaclite->bus->read = emaclite_miiphy_read;
+ emaclite->bus->write = emaclite_miiphy_write;
+ emaclite->bus->priv = emaclite;
+ strcpy(emaclite->bus->name, "emaclite");
- emaclite->txpp = txpp;
- emaclite->rxpp = rxpp;
+ ret = mdio_register(emaclite->bus);
+ if (ret)
+ return ret;
- sprintf(dev->name, "Xelite.%lx", base_addr);
+ return 0;
+}
- dev->iobase = base_addr;
- dev->init = emaclite_init;
- dev->halt = emaclite_halt;
- dev->send = emaclite_send;
- dev->recv = emaclite_recv;
+static int emaclite_remove(struct udevice *dev)
+{
+ struct xemaclite *emaclite = dev_get_priv(dev);
- eth_register(dev);
+ free(emaclite->phydev);
+ mdio_unregister(emaclite->bus);
+ mdio_free(emaclite->bus);
- return 1;
+ return 0;
}
-#if CONFIG_IS_ENABLED(OF_CONTROL)
-int xilinx_emaclite_of_init(const void *blob)
+static const struct eth_ops emaclite_ops = {
+ .start = emaclite_start,
+ .send = emaclite_send,
+ .recv = emaclite_recv,
+ .stop = emaclite_stop,
+};
+
+static int emaclite_ofdata_to_platdata(struct udevice *dev)
{
+ struct eth_pdata *pdata = dev_get_platdata(dev);
+ struct xemaclite *emaclite = dev_get_priv(dev);
int offset = 0;
- u32 ret = 0;
- u32 reg;
- do {
- offset = fdt_node_offset_by_compatible(blob, offset,
- "xlnx,xps-ethernetlite-1.00.a");
- if (offset != -1) {
- reg = fdtdec_get_addr(blob, offset, "reg");
- if (reg != FDT_ADDR_T_NONE) {
- u32 rxpp = fdtdec_get_int(blob, offset,
- "xlnx,rx-ping-pong", 0);
- u32 txpp = fdtdec_get_int(blob, offset,
- "xlnx,tx-ping-pong", 0);
- ret |= xilinx_emaclite_initialize(NULL, reg,
- txpp, rxpp);
- } else {
- debug("EMACLITE: Can't get base address\n");
- return -1;
- }
- }
- } while (offset != -1);
+ pdata->iobase = (phys_addr_t)dev_get_addr(dev);
+ emaclite->regs = (struct emaclite_regs *)pdata->iobase;
+
+ emaclite->phyaddr = -1;
+
+ offset = fdtdec_lookup_phandle(gd->fdt_blob, dev->of_offset,
+ "phy-handle");
+ if (offset > 0)
+ emaclite->phyaddr = fdtdec_get_int(gd->fdt_blob, offset,
+ "reg", -1);
+
+ emaclite->txpp = fdtdec_get_int(gd->fdt_blob, dev->of_offset,
+ "xlnx,tx-ping-pong", 0);
+ emaclite->rxpp = fdtdec_get_int(gd->fdt_blob, dev->of_offset,
+ "xlnx,rx-ping-pong", 0);
- return ret;
+ printf("EMACLITE: %lx, phyaddr %d, %d/%d\n", (ulong)emaclite->regs,
+ emaclite->phyaddr, emaclite->txpp, emaclite->rxpp);
+
+ return 0;
}
-#endif
+
+static const struct udevice_id emaclite_ids[] = {
+ { .compatible = "xlnx,xps-ethernetlite-1.00.a" },
+ { }
+};
+
+U_BOOT_DRIVER(emaclite) = {
+ .name = "emaclite",
+ .id = UCLASS_ETH,
+ .of_match = emaclite_ids,
+ .ofdata_to_platdata = emaclite_ofdata_to_platdata,
+ .probe = emaclite_probe,
+ .remove = emaclite_remove,
+ .ops = &emaclite_ops,
+ .priv_auto_alloc_size = sizeof(struct xemaclite),
+ .platdata_auto_alloc_size = sizeof(struct eth_pdata),
+};
diff --git a/drivers/net/xilinx_ll_temac.c b/drivers/net/xilinx_ll_temac.c
index 7cc86571e4952e001f2d5da234795abd520d223a..ca09546ab59f7f7d4b540eb6903bdacaa9a55815 100644
--- a/drivers/net/xilinx_ll_temac.c
+++ b/drivers/net/xilinx_ll_temac.c
@@ -303,7 +303,8 @@ int xilinx_ll_temac_initialize(bd_t *bis, struct ll_temac_info *devinf)
if (devinf->devname) {
strncpy(dev->name, devinf->devname, sizeof(dev->name));
} else {
- snprintf(dev->name, sizeof(dev->name), "lltemac.%lx", devinf->base_addr);
+ snprintf(dev->name, sizeof(dev->name), "ll_tem.%lx",
+ devinf->base_addr);
devinf->devname = dev->name;
}
diff --git a/drivers/net/zynq_gem.c b/drivers/net/zynq_gem.c
index 97e30f3be044e0a76db6428245648d5b3251a874..b3821c31a91dc36f0cf6e7169c9ecc7bbad10c02 100644
--- a/drivers/net/zynq_gem.c
+++ b/drivers/net/zynq_gem.c
@@ -57,7 +57,11 @@ DECLARE_GLOBAL_DATA_PTR;
#define ZYNQ_GEM_NWCFG_SPEED1000 0x000000400 /* 1Gbps operation */
#define ZYNQ_GEM_NWCFG_FDEN 0x000000002 /* Full Duplex mode */
#define ZYNQ_GEM_NWCFG_FSREM 0x000020000 /* FCS removal */
+#ifdef CONFIG_ARM64
+#define ZYNQ_GEM_NWCFG_MDCCLKDIV 0x000100000 /* Div pclk by 64, max 160MHz */
+#else
#define ZYNQ_GEM_NWCFG_MDCCLKDIV 0x0000c0000 /* Div pclk by 48, max 120MHz */
+#endif
#ifdef CONFIG_ARM64
# define ZYNQ_GEM_DBUS_WIDTH (1 << 21) /* 64 bit bus */
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 83068cfd50f4c53aac9f1a906602be22624d4b5f..1ab612826914e71872c37b895a30bae27b042633 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -112,6 +112,13 @@ config DEBUG_UART_S5P
will need to provide parameters to make this work. The driver will
be available until the real driver-model serial is running.
+config DEBUG_UART_UARTLITE
+ bool "Xilinx Uartlite"
+ help
+ Select this to enable a debug UART using the serial_uartlite driver.
+ You will need to provide parameters to make this work. The driver will
+ be available until the real driver-model serial is running.
+
config DEBUG_UART_ZYNQ
bool "Xilinx Zynq"
help
@@ -271,4 +278,11 @@ config UNIPHIER_SERIAL
If you have a UniPhier based board and want to use the on-chip
serial ports, say Y to this option. If unsure, say N.
+config XILINX_UARTLITE
+ bool "Xilinx Uarlite support"
+ depends on DM_SERIAL && (MICROBLAZE || ARCH_ZYNQ || ARCH_ZYNQMP || 4xx)
+ help
+ If you have a Xilinx based board and want to use the uartlite
+ serial ports, say Y to this option. If unsure, say N.
+
endmenu
diff --git a/drivers/serial/serial_xuartlite.c b/drivers/serial/serial_xuartlite.c
index 988438e75471a37f2643328c910ff13b0fe753e5..a2e93039257133aa97ef101d5f2208ebb100f187 100644
--- a/drivers/serial/serial_xuartlite.c
+++ b/drivers/serial/serial_xuartlite.c
@@ -1,5 +1,5 @@
/*
- * (C) Copyright 2008-2011 Michal Simek <monstr@monstr.eu>
+ * (C) Copyright 2008 - 2015 Michal Simek <monstr@monstr.eu>
* Clean driver and add xilinx constant from header file
*
* (C) Copyright 2004 Atmark Techno, Inc.
@@ -10,13 +10,17 @@
#include <config.h>
#include <common.h>
+#include <dm.h>
#include <asm/io.h>
#include <linux/compiler.h>
#include <serial.h>
-#define SR_TX_FIFO_FULL 0x08 /* transmit FIFO full */
-#define SR_RX_FIFO_VALID_DATA 0x01 /* data in receive FIFO */
-#define SR_RX_FIFO_FULL 0x02 /* receive FIFO full */
+DECLARE_GLOBAL_DATA_PTR;
+
+#define SR_TX_FIFO_FULL BIT(3) /* transmit FIFO full */
+#define SR_TX_FIFO_EMPTY BIT(2) /* transmit FIFO empty */
+#define SR_RX_FIFO_VALID_DATA BIT(0) /* data in receive FIFO */
+#define SR_RX_FIFO_FULL BIT(1) /* receive FIFO full */
#define ULITE_CONTROL_RST_TX 0x01
#define ULITE_CONTROL_RST_RX 0x02
@@ -28,135 +32,111 @@ struct uartlite {
unsigned int control;
};
-static struct uartlite *userial_ports[4] = {
-#ifdef XILINX_UARTLITE_BASEADDR
- [0] = (struct uartlite *)XILINX_UARTLITE_BASEADDR,
-#endif
-#ifdef XILINX_UARTLITE_BASEADDR1
- [1] = (struct uartlite *)XILINX_UARTLITE_BASEADDR1,
-#endif
-#ifdef XILINX_UARTLITE_BASEADDR2
- [2] = (struct uartlite *)XILINX_UARTLITE_BASEADDR2,
-#endif
-#ifdef XILINX_UARTLITE_BASEADDR3
- [3] = (struct uartlite *)XILINX_UARTLITE_BASEADDR3
-#endif
+struct uartlite_platdata {
+ struct uartlite *regs;
};
-static void uartlite_serial_putc(const char c, const int port)
+static int uartlite_serial_putc(struct udevice *dev, const char ch)
{
- struct uartlite *regs = userial_ports[port];
+ struct uartlite_platdata *plat = dev_get_platdata(dev);
+ struct uartlite *regs = plat->regs;
- if (c == '\n')
- uartlite_serial_putc('\r', port);
+ if (in_be32(®s->status) & SR_TX_FIFO_FULL)
+ return -EAGAIN;
- while (in_be32(®s->status) & SR_TX_FIFO_FULL)
- ;
- out_be32(®s->tx_fifo, c & 0xff);
-}
+ out_be32(®s->tx_fifo, ch & 0xff);
-static void uartlite_serial_puts(const char *s, const int port)
-{
- while (*s)
- uartlite_serial_putc(*s++, port);
+ return 0;
}
-static int uartlite_serial_getc(const int port)
+static int uartlite_serial_getc(struct udevice *dev)
{
- struct uartlite *regs = userial_ports[port];
+ struct uartlite_platdata *plat = dev_get_platdata(dev);
+ struct uartlite *regs = plat->regs;
+
+ if (!(in_be32(®s->status) & SR_RX_FIFO_VALID_DATA))
+ return -EAGAIN;
- while (!(in_be32(®s->status) & SR_RX_FIFO_VALID_DATA))
- ;
return in_be32(®s->rx_fifo) & 0xff;
}
-static int uartlite_serial_tstc(const int port)
+static int uartlite_serial_pending(struct udevice *dev, bool input)
{
- struct uartlite *regs = userial_ports[port];
+ struct uartlite_platdata *plat = dev_get_platdata(dev);
+ struct uartlite *regs = plat->regs;
+
+ if (input)
+ return in_be32(®s->status) & SR_RX_FIFO_VALID_DATA;
- return in_be32(®s->status) & SR_RX_FIFO_VALID_DATA;
+ return !(in_be32(®s->status) & SR_TX_FIFO_EMPTY);
}
-static int uartlite_serial_init(const int port)
+static int uartlite_serial_probe(struct udevice *dev)
{
- struct uartlite *regs = userial_ports[port];
+ struct uartlite_platdata *plat = dev_get_platdata(dev);
+ struct uartlite *regs = plat->regs;
- if (regs) {
- out_be32(®s->control, 0);
- out_be32(®s->control,
- ULITE_CONTROL_RST_RX | ULITE_CONTROL_RST_TX);
- in_be32(®s->control);
- return 0;
- }
+ out_be32(®s->control, 0);
+ out_be32(®s->control, ULITE_CONTROL_RST_RX | ULITE_CONTROL_RST_TX);
+ in_be32(®s->control);
- return -1;
+ return 0;
}
-/* Multi serial device functions */
-#define DECLARE_ESERIAL_FUNCTIONS(port) \
- static int userial##port##_init(void) \
- { return uartlite_serial_init(port); } \
- static void userial##port##_setbrg(void) {} \
- static int userial##port##_getc(void) \
- { return uartlite_serial_getc(port); } \
- static int userial##port##_tstc(void) \
- { return uartlite_serial_tstc(port); } \
- static void userial##port##_putc(const char c) \
- { uartlite_serial_putc(c, port); } \
- static void userial##port##_puts(const char *s) \
- { uartlite_serial_puts(s, port); }
-
-/* Serial device descriptor */
-#define INIT_ESERIAL_STRUCTURE(port, __name) { \
- .name = __name, \
- .start = userial##port##_init, \
- .stop = NULL, \
- .setbrg = userial##port##_setbrg, \
- .getc = userial##port##_getc, \
- .tstc = userial##port##_tstc, \
- .putc = userial##port##_putc, \
- .puts = userial##port##_puts, \
+static int uartlite_serial_ofdata_to_platdata(struct udevice *dev)
+{
+ struct uartlite_platdata *plat = dev_get_platdata(dev);
+
+ plat->regs = (struct uartlite *)dev_get_addr(dev);
+
+ return 0;
}
-DECLARE_ESERIAL_FUNCTIONS(0);
-struct serial_device uartlite_serial0_device =
- INIT_ESERIAL_STRUCTURE(0, "ttyUL0");
-DECLARE_ESERIAL_FUNCTIONS(1);
-struct serial_device uartlite_serial1_device =
- INIT_ESERIAL_STRUCTURE(1, "ttyUL1");
-DECLARE_ESERIAL_FUNCTIONS(2);
-struct serial_device uartlite_serial2_device =
- INIT_ESERIAL_STRUCTURE(2, "ttyUL2");
-DECLARE_ESERIAL_FUNCTIONS(3);
-struct serial_device uartlite_serial3_device =
- INIT_ESERIAL_STRUCTURE(3, "ttyUL3");
-
-__weak struct serial_device *default_serial_console(void)
+static const struct dm_serial_ops uartlite_serial_ops = {
+ .putc = uartlite_serial_putc,
+ .pending = uartlite_serial_pending,
+ .getc = uartlite_serial_getc,
+};
+
+static const struct udevice_id uartlite_serial_ids[] = {
+ { .compatible = "xlnx,opb-uartlite-1.00.b", },
+ { .compatible = "xlnx,xps-uartlite-1.00.a" },
+ { }
+};
+
+U_BOOT_DRIVER(serial_uartlite) = {
+ .name = "serial_uartlite",
+ .id = UCLASS_SERIAL,
+ .of_match = uartlite_serial_ids,
+ .ofdata_to_platdata = uartlite_serial_ofdata_to_platdata,
+ .platdata_auto_alloc_size = sizeof(struct uartlite_platdata),
+ .probe = uartlite_serial_probe,
+ .ops = &uartlite_serial_ops,
+ .flags = DM_FLAG_PRE_RELOC,
+};
+
+#ifdef CONFIG_DEBUG_UART_UARTLITE
+
+#include <debug_uart.h>
+
+static inline void _debug_uart_init(void)
{
- if (userial_ports[0])
- return &uartlite_serial0_device;
- if (userial_ports[1])
- return &uartlite_serial1_device;
- if (userial_ports[2])
- return &uartlite_serial2_device;
- if (userial_ports[3])
- return &uartlite_serial3_device;
-
- return NULL;
+ struct uartlite *regs = (struct uartlite *)CONFIG_DEBUG_UART_BASE;
+
+ out_be32(®s->control, 0);
+ out_be32(®s->control, ULITE_CONTROL_RST_RX | ULITE_CONTROL_RST_TX);
+ in_be32(®s->control);
}
-void uartlite_serial_initialize(void)
+static inline void _debug_uart_putc(int ch)
{
-#ifdef XILINX_UARTLITE_BASEADDR
- serial_register(&uartlite_serial0_device);
-#endif /* XILINX_UARTLITE_BASEADDR */
-#ifdef XILINX_UARTLITE_BASEADDR1
- serial_register(&uartlite_serial1_device);
-#endif /* XILINX_UARTLITE_BASEADDR1 */
-#ifdef XILINX_UARTLITE_BASEADDR2
- serial_register(&uartlite_serial2_device);
-#endif /* XILINX_UARTLITE_BASEADDR2 */
-#ifdef XILINX_UARTLITE_BASEADDR3
- serial_register(&uartlite_serial3_device);
-#endif /* XILINX_UARTLITE_BASEADDR3 */
+ struct uartlite *regs = (struct uartlite *)CONFIG_DEBUG_UART_BASE;
+
+ while (in_be32(®s->status) & SR_TX_FIFO_FULL)
+ ;
+
+ out_be32(®s->tx_fifo, ch & 0xff);
}
+
+DEBUG_UART_FUNCS
+#endif
diff --git a/drivers/serial/serial_zynq.c b/drivers/serial/serial_zynq.c
index 3430482f8d8b9e9a63c9dda792a07035d58a6401..e79d997cbab722580f2c8c2876a7f518577a1f41 100644
--- a/drivers/serial/serial_zynq.c
+++ b/drivers/serial/serial_zynq.c
@@ -156,13 +156,8 @@ static int zynq_serial_pending(struct udevice *dev, bool input)
static int zynq_serial_ofdata_to_platdata(struct udevice *dev)
{
struct zynq_uart_priv *priv = dev_get_priv(dev);
- fdt_addr_t addr;
- addr = fdtdec_get_addr(gd->fdt_blob, dev->of_offset, "reg");
- if (addr == FDT_ADDR_T_NONE)
- return -EINVAL;
-
- priv->regs = (struct uart_zynq *)addr;
+ priv->regs = (struct uart_zynq *)dev_get_addr(dev);
return 0;
}
@@ -177,6 +172,7 @@ static const struct dm_serial_ops zynq_serial_ops = {
static const struct udevice_id zynq_serial_ids[] = {
{ .compatible = "xlnx,xuartps" },
{ .compatible = "cdns,uart-r1p8" },
+ { .compatible = "cdns,uart-r1p12" },
{ }
};
diff --git a/include/configs/fx12mm.h b/include/configs/fx12mm.h
deleted file mode 100644
index fa32a2e8cf3771e290bfc38486be4766b92eb907..0000000000000000000000000000000000000000
--- a/include/configs/fx12mm.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * (C) Copyright 2008
- *
- * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
- * This work has been supported by: QTechnology http://qtec.com
- *
- * Georg Schardt <schardt@team-ctech.de>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/*
- * Configuration file for the Virtex4FX12 Minimodul by Avnet/Memec,
- * see http://www.em.avnet.com
- */
-
-#ifndef __CONFIG_FX12_H
-#define __CONFIG_FX12_H
-
-#include "../board/avnet/fx12mm/xparameters.h"
-
-/* cmd config */
-#define CONFIG_CMD_JFFS2
-#define CONFIG_CMD_MTDPARTS
-#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
-#define CONFIG_FLASH_CFI_MTD
-
-/* sdram */
-#define CONFIG_SYS_SDRAM_SIZE_MB 64
-
-/* environment */
-#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_SIZE 0x10000
-#define CONFIG_ENV_SECT_SIZE 0x10000
-#define CONFIG_SYS_ENV_OFFSET 0xA0000
-#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE+CONFIG_SYS_ENV_OFFSET)
-#define CONFIG_ENV_OVERWRITE 1
-
-/*Misc*/
-#define CONFIG_PREBOOT "echo U-Boot is up and running;"
-
-/*Flash*/
-#define CONFIG_SYS_FLASH_SIZE (4*1024*1024)
-#define CONFIG_SYS_MAX_FLASH_SECT 71
-#define MTDIDS_DEFAULT "nor0=fx12mm-flash"
-#define MTDPARTS_DEFAULT "mtdparts=fx12mm-flash:-(user)"
-
-#include "configs/xilinx-ppc405.h"
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/microblaze-generic.h b/include/configs/microblaze-generic.h
index f93861d770ee3effe181ae050cea09ec0775c686..97a0d86b912bdd9e663cbd1c5330070f92363669 100644
--- a/include/configs/microblaze-generic.h
+++ b/include/configs/microblaze-generic.h
@@ -32,54 +32,20 @@
#endif
/* uart */
-#ifdef XILINX_UARTLITE_BASEADDR
-# define CONFIG_XILINX_UARTLITE
-# define CONFIG_SERIAL_BASE XILINX_UARTLITE_BASEADDR
-# define CONFIG_BAUDRATE XILINX_UARTLITE_BAUDRATE
-# define CONFIG_SYS_BAUDRATE_TABLE { CONFIG_BAUDRATE }
-# define CONSOLE_ARG "console=console=ttyUL0,115200\0"
-#elif XILINX_UART16550_BASEADDR
-# define CONFIG_SYS_NS16550_SERIAL
-# if defined(__MICROBLAZEEL__)
-# define CONFIG_SYS_NS16550_REG_SIZE -4
-# else
-# define CONFIG_SYS_NS16550_REG_SIZE 4
-# endif
-# define CONFIG_CONS_INDEX 1
-# define CONFIG_SYS_NS16550_COM1 \
- ((XILINX_UART16550_BASEADDR & ~0xF) + 0x1000)
-# define CONFIG_SYS_NS16550_CLK XILINX_UART16550_CLOCK_HZ
# define CONFIG_BAUDRATE 115200
-
/* The following table includes the supported baudrates */
# define CONFIG_SYS_BAUDRATE_TABLE \
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
-# define CONSOLE_ARG "console=console=ttyS0,115200\0"
-#else
-# error Undefined uart
-#endif
/* setting reset address */
/*#define CONFIG_SYS_RESET_ADDRESS CONFIG_SYS_TEXT_BASE*/
-/* ethernet */
-#undef CONFIG_SYS_ENET
-#if defined(XILINX_EMACLITE_BASEADDR) || defined(CONFIG_OF_CONTROL)
-# define CONFIG_XILINX_EMACLITE 1
-# define CONFIG_SYS_ENET
-#endif
-#if defined(XILINX_AXIEMAC_BASEADDR)
-# define CONFIG_XILINX_AXIEMAC 1
-# define CONFIG_SYS_ENET
-#endif
-
-#undef ET_DEBUG
-
/* gpio */
#ifdef XILINX_GPIO_BASEADDR
# define CONFIG_XILINX_GPIO
# define CONFIG_SYS_GPIO_0_ADDR XILINX_GPIO_BASEADDR
#endif
+#define CONFIG_BOARD_LATE_INIT
/* interrupt controller */
#ifdef XILINX_INTC_BASEADDR
@@ -103,13 +69,6 @@
# endif
#endif
-#if !defined(CONFIG_OF_CONTROL) || \
- (defined(CONFIG_SPL_BUILD) && !defined(CONFIG_SPL_OF_CONTROL))
-/* ddr sdram - main memory */
-# define CONFIG_SYS_SDRAM_BASE XILINX_RAM_START
-# define CONFIG_SYS_SDRAM_SIZE XILINX_RAM_SIZE
-#endif
-
#define CONFIG_SYS_MALLOC_LEN 0xC0000
/* Stack location before relocation */
@@ -198,16 +157,6 @@
#endif /* !SPIFLASH */
#endif /* !FLASH */
-/* system ace */
-#ifdef XILINX_SYSACE_BASEADDR
-# define CONFIG_SYSTEMACE
-/* #define DEBUG_SYSTEMACE */
-# define SYSTEMACE_CONFIG_FPGA
-# define CONFIG_SYS_SYSTEMACE_BASE XILINX_SYSACE_BASEADDR
-# define CONFIG_SYS_SYSTEMACE_WIDTH XILINX_SYSACE_MEM_WIDTH
-# define CONFIG_DOS_PARTITION
-#endif
-
#if defined(XILINX_USE_ICACHE)
# define CONFIG_ICACHE
#else
@@ -245,17 +194,6 @@
# undef CONFIG_CMD_CACHE
#endif
-#ifdef CONFIG_SYS_ENET
-# define CONFIG_CMD_PING
-# define CONFIG_CMD_DHCP
-# define CONFIG_CMD_TFTPPUT
-#endif
-
-#if defined(CONFIG_SYSTEMACE)
-# define CONFIG_CMD_EXT2
-# define CONFIG_CMD_FAT
-#endif
-
#if defined(FLASH)
# define CONFIG_CMD_JFFS2
# define CONFIG_CMD_UBI
@@ -315,7 +253,7 @@
#define CONFIG_SYS_MAXARGS 15
#define CONFIG_SYS_LONGHELP
/* default load address */
-#define CONFIG_SYS_LOAD_ADDR XILINX_RAM_START
+#define CONFIG_SYS_LOAD_ADDR 0
#define CONFIG_BOOTDELAY -1 /* -1 disables auto-boot */
#define CONFIG_BOOTARGS "root=romfs"
@@ -342,15 +280,10 @@
#define CONFIG_CMDLINE_EDITING
-#define CONFIG_NETCONSOLE
#define CONFIG_SYS_CONSOLE_IS_IN_ENV
-/* Use the HUSH parser */
-#define CONFIG_SYS_HUSH_PARSER
-
/* Enable flat device tree support */
#define CONFIG_LMB 1
-#define CONFIG_FIT 1
#define CONFIG_OF_LIBFDT 1
#if defined(CONFIG_XILINX_AXIEMAC)
@@ -358,20 +291,19 @@
# define CONFIG_CMD_MII 1
# define CONFIG_PHY_GIGE 1
# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN 1
-# define CONFIG_PHYLIB 1
# define CONFIG_PHY_ATHEROS 1
# define CONFIG_PHY_BROADCOM 1
# define CONFIG_PHY_DAVICOM 1
# define CONFIG_PHY_LXT 1
# define CONFIG_PHY_MARVELL 1
# define CONFIG_PHY_MICREL 1
+# define CONFIG_PHY_MICREL_KSZ9021
# define CONFIG_PHY_NATSEMI 1
# define CONFIG_PHY_REALTEK 1
# define CONFIG_PHY_VITESSE 1
#else
# undef CONFIG_MII
# undef CONFIG_CMD_MII
-# undef CONFIG_PHYLIB
#endif
/* SPL part */
diff --git a/include/configs/ml507.h b/include/configs/ml507.h
deleted file mode 100644
index 89a72904b3d75239291d6008ebb90b818a6e6cb6..0000000000000000000000000000000000000000
--- a/include/configs/ml507.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * (C) Copyright 2008
- * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
- * This work has been supported by: QTechnology http://qtec.com/
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*CPU*/
-#define CONFIG_440 1
-#define CONFIG_XILINX_ML507 1
-#include "../board/xilinx/ml507/xparameters.h"
-
-/*Mem Map*/
-#define CONFIG_SYS_SDRAM_SIZE_MB 256
-
-/*Env*/
-#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_SIZE 0x20000
-#define CONFIG_ENV_SECT_SIZE 0x20000
-#define CONFIG_ENV_OFFSET 0x340000
-#define CONFIG_ENV_ADDR (XPAR_FLASH_MEM0_BASEADDR+CONFIG_ENV_OFFSET)
-
-/*Misc*/
-#define CONFIG_PREBOOT "echo U-Boot is up and runnining;"
-
-/*Flash*/
-#define CONFIG_SYS_FLASH_SIZE (32*1024*1024)
-#define CONFIG_SYS_MAX_FLASH_SECT 259
-#define MTDIDS_DEFAULT "nor0=ml507-flash"
-#define MTDPARTS_DEFAULT "mtdparts=ml507-flash:-(user)"
-
-/*Generic Configs*/
-#include <configs/xilinx-ppc440.h>
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/v5fx30teval.h b/include/configs/v5fx30teval.h
deleted file mode 100644
index 298fa3e6d0a6bd78ee525b507745c9b067eb1d3c..0000000000000000000000000000000000000000
--- a/include/configs/v5fx30teval.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * (C) Copyright 2008
- * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
- * This work has been supported by: QTechnology http://qtec.com/
- * SPDX-License-Identifier: GPL-2.0+
-*/
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*CPU*/
-#define CONFIG_440 1
-#define CONFIG_XILINX_ML507 1
-#include "../board/avnet/v5fx30teval/xparameters.h"
-
-/*Mem Map*/
-#define CONFIG_SYS_SDRAM_SIZE_MB 64
-
-/*Env*/
-#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_SIZE 0x20000
-#define CONFIG_ENV_SECT_SIZE 0x20000
-#define CONFIG_ENV_OFFSET 0x1A0000
-#define CONFIG_ENV_ADDR (XPAR_FLASH_MEM0_BASEADDR+CONFIG_ENV_OFFSET)
-
-/*Misc*/
-#define CONFIG_PREBOOT "echo U-Boot is up and runnining;"
-
-/*Flash*/
-#define CONFIG_SYS_FLASH_SIZE (16*1024*1024)
-#define CONFIG_SYS_MAX_FLASH_SECT 131
-#define MTDIDS_DEFAULT "nor0=v5fx30t-flash"
-#define MTDPARTS_DEFAULT "mtdparts=v5fx30t-flash:-(user)"
-
-/*Generic Configs*/
-#include <configs/xilinx-ppc440.h>
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/xilinx-ppc.h b/include/configs/xilinx-ppc.h
index eb400d09607402d56edfd57a1fc455b1a1cccd19..d01d88b33f4d34afb65838f60d5a1e532084ec88 100644
--- a/include/configs/xilinx-ppc.h
+++ b/include/configs/xilinx-ppc.h
@@ -1,6 +1,6 @@
/*
* (C) Copyright 2008
- * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
+ * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@gmail.com
* This work has been supported by: QTechnology http://qtec.com/
*
* (C) Copyright 2008
@@ -101,22 +101,10 @@
#define CONFIG_SYS_NO_FLASH
#endif
-/* serial communication */
-#ifdef XPAR_UARTLITE_0_BASEADDR
-#define CONFIG_XILINX_UARTLITE
-#define XILINX_UARTLITE_BASEADDR XPAR_UARTLITE_0_BASEADDR
-#define CONFIG_BAUDRATE XPAR_UARTLITE_0_BAUDRATE
-#define CONFIG_SYS_BAUDRATE_TABLE { CONFIG_BAUDRATE }
-#else
-#ifdef XPAR_UARTNS550_0_BASEADDR
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE 4
-#define CONFIG_CONS_INDEX 1
-#define CONFIG_SYS_NS16550_COM1 XPAR_UARTNS550_0_BASEADDR
-#define CONFIG_SYS_NS16550_CLK XPAR_UARTNS550_0_CLOCK_FREQ_HZ
+#define CONFIG_OF_LIBFDT 1
#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 115200 }
-#endif
-#endif
+/* The following table includes the supported baudrates */
+# define CONFIG_SYS_BAUDRATE_TABLE \
+ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
#endif /* __CONFIG_H */
diff --git a/include/configs/xilinx-ppc405-generic.h b/include/configs/xilinx-ppc405-generic.h
index 40fa0878a43f73ddbd2ca631b523c709d0a7ecf5..6182b0e7cf05ae462d7a745f7cb43409369c8feb 100644
--- a/include/configs/xilinx-ppc405-generic.h
+++ b/include/configs/xilinx-ppc405-generic.h
@@ -1,7 +1,7 @@
/*
*
* (C) Copyright 2008
- * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
+ * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@gmail.com
* This work has been supported by: QTechnology http://qtec.com/
*
* (C) Copyright 2008
@@ -14,6 +14,9 @@
#include "../board/xilinx/ppc405-generic/xparameters.h"
+#define CONFIG_405 1
+#define CONFIG_XILINX_405 1
+
/* sdram */
#define CONFIG_SYS_SDRAM_SIZE_MB 256
@@ -26,16 +29,16 @@
#define CONFIG_ENV_OVERWRITE 1
/*Misc*/
-#define CONFIG_PREBOOT "echo U-Boot is up and runnining;"
+#define CONFIG_PREBOOT "echo U-Boot is up and running;"
/*Flash*/
-#define CONFIG_SYS_FLASH_BASE XPAR_FLASH_MEM0_BASEADDR
-#define CONFIG_SYS_FLASH_SIZE (32*1024*1024)
-#define CONFIG_SYS_MAX_FLASH_SECT 71
+#define CONFIG_SYS_FLASH_BASE XPAR_FLASH_MEM0_BASEADDR
+#define CONFIG_SYS_FLASH_SIZE (128*1024*1024)
+#define CONFIG_SYS_MAX_FLASH_SECT 1024
#define CONFIG_SYS_FLASH_CFI 1
#define CONFIG_FLASH_CFI_DRIVER 1
-#define MTDIDS_DEFAULT "nor0=ppc405-flash"
-#define MTDPARTS_DEFAULT "mtdpartsa=ppc405-flash:-(user)"
+#define MTDIDS_DEFAULT "nor0=flash"
+#define MTDPARTS_DEFAULT "mtdparts=flash:-(user)"
-#include <configs/xilinx-ppc405.h>
+#include <configs/xilinx-ppc.h>
#endif /* __CONFIG_H */
diff --git a/include/configs/xilinx-ppc405.h b/include/configs/xilinx-ppc405.h
deleted file mode 100644
index a0151fe8f4cbdbeaa3f0e9a9184d982f9302c4f2..0000000000000000000000000000000000000000
--- a/include/configs/xilinx-ppc405.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- *
- * (C) Copyright 2008
- * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
- * This work has been supported by: QTechnology http://qtec.com/
- *
- * (C) Copyright 2008
- * Georg Schardt <schardt@team-ctech.de>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/* cpu parameter */
-#define CONFIG_405 1
-#define CONFIG_XILINX_405 1
-
-#include <configs/xilinx-ppc.h>
-
-#endif
diff --git a/include/configs/xilinx-ppc440-generic.h b/include/configs/xilinx-ppc440-generic.h
index 95b883407839e1de85c5cb3a67c78f21fcce814d..f2505a6cd2b288801959c78a4d072c5f048a6a5b 100644
--- a/include/configs/xilinx-ppc440-generic.h
+++ b/include/configs/xilinx-ppc440-generic.h
@@ -1,6 +1,6 @@
/*
* (C) Copyright 2008
- * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
+ * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@gmail.com
* This work has been supported by: QTechnology http://qtec.com/
* SPDX-License-Identifier: GPL-2.0+
*/
@@ -8,31 +8,42 @@
#ifndef __CONFIG_H
#define __CONFIG_H
-/*CPU*/
+/* CPU */
#define CONFIG_440 1
+#define CONFIG_XILINX_440 1
#define CONFIG_XILINX_PPC440_GENERIC 1
#include "../board/xilinx/ppc440-generic/xparameters.h"
-/*Mem Map*/
+/* Mem Map */
#define CONFIG_SYS_SDRAM_SIZE_MB 256
-/*Env*/
+/* Env */
#define CONFIG_ENV_IS_IN_FLASH 1
#define CONFIG_ENV_SIZE 0x20000
#define CONFIG_ENV_SECT_SIZE 0x20000
-#define CONFIG_ENV_OFFSET 0x340000
+#define CONFIG_ENV_OFFSET 0x340000
#define CONFIG_ENV_ADDR (XPAR_FLASH_MEM0_BASEADDR+CONFIG_ENV_OFFSET)
-/*Misc*/
-#define CONFIG_PREBOOT "echo U-Boot is up and runnining;"
-
-/*Flash*/
-#define CONFIG_SYS_FLASH_SIZE (32*1024*1024)
-#define CONFIG_SYS_MAX_FLASH_SECT 259
-#define MTDIDS_DEFAULT "nor0=ml507-flash"
-#define MTDPARTS_DEFAULT "mtdparts=ml507-flash:-(user)"
-
-/*Generic Configs*/
-#include <configs/xilinx-ppc440.h>
+/* Misc */
+#define CONFIG_PREBOOT "echo U-Boot is up and running;"
+
+/* Flash */
+#define CONFIG_SYS_FLASH_SIZE (128*1024*1024)
+#define CONFIG_SYS_MAX_FLASH_SECT 1024
+#define MTDIDS_DEFAULT "nor0=flash"
+#define MTDPARTS_DEFAULT "mtdparts=flash:-(user)"
+
+/* Net */
+#ifdef XPAR_LLTEMAC_0_BASEADDR
+#define CONFIG_XILINX_LL_TEMAC
+#define CONFIG_MII
+#define CONFIG_PHYLIB
+#define CONFIG_PHY_MARVELL
+#define CONFIG_NET_RANDOM_ETHADDR
+#define CONFIG_LIB_RAND
+#endif
+
+/* Generic Configs */
+#include <configs/xilinx-ppc.h>
#endif /* __CONFIG_H */
diff --git a/include/configs/xilinx-ppc440.h b/include/configs/xilinx-ppc440.h
deleted file mode 100644
index f45700878ecdf842de1776f5235f5092e08ccbc1..0000000000000000000000000000000000000000
--- a/include/configs/xilinx-ppc440.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * (C) Copyright 2008
- * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
- * This work has been supported by: QTechnology http://qtec.com/
- * SPDX-License-Identifier: GPL-2.0+
-*/
-
-#ifndef __CONFIG_GEN_H
-#define __CONFIG_GEN_H
-
-/*CPU*/
-#define CONFIG_440 1
-#define CONFIG_XILINX_440 1
-
-#include <configs/xilinx-ppc.h>
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/xilinx_zynqmp.h b/include/configs/xilinx_zynqmp.h
index 03f74508efeaf6539a7eb7e7dbe72a6c9d022a70..27ef74daf50f41187860b5f4db10ba743747bc1d 100644
--- a/include/configs/xilinx_zynqmp.h
+++ b/include/configs/xilinx_zynqmp.h
@@ -23,10 +23,8 @@
#define GICD_BASE 0xF9010000
#define GICC_BASE 0xF9020000
-/* Physical Memory Map */
-#define CONFIG_NR_DRAM_BANKS 1
-#define CONFIG_SYS_SDRAM_BASE 0
-#define CONFIG_SYS_SDRAM_SIZE 0x40000000
+#define CONFIG_SYS_ALT_MEMTEST
+#define CONFIG_SYS_MEMTEST_SCRATCH 0xfffc0000
#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
#define CONFIG_SYS_MEMTEST_END CONFIG_SYS_SDRAM_SIZE
@@ -37,7 +35,9 @@
/* Cache Definitions */
#define CONFIG_SYS_CACHELINE_SIZE 64
-#define CONFIG_IDENT_STRING " Xilinx ZynqMP"
+#if !defined(CONFIG_IDENT_STRING)
+# define CONFIG_IDENT_STRING " Xilinx ZynqMP"
+#endif
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0)
@@ -45,7 +45,9 @@
#define CONFIG_OF_LIBFDT
/* Generic Timer Definitions - setup in EL3. Setup by ATF for other cases */
-#define COUNTER_FREQUENCY 4000000
+#if !defined(COUNTER_FREQUENCY)
+# define COUNTER_FREQUENCY 100000000
+#endif
/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 0x2000000)
@@ -137,9 +139,9 @@
#define CONFIG_THOR_RESET_OFF
#define DFU_ALT_INFO_RAM \
"dfu_ram_info=" \
- "set dfu_alt_info " \
- "Image ram 0x200000 0x1800000\\\\;" \
- "system.dtb ram 0x7000000 0x40000\0" \
+ "setenv dfu_alt_info " \
+ "Image ram $kernel_addr $kernel_size\\\\;" \
+ "system.dtb ram $fdt_addr $fdt_size\0" \
"dfu_ram=run dfu_ram_info && dfu 0 ram 0\0" \
"thor_ram=run dfu_ram_info && thordown 0 ram 0\0"
@@ -156,12 +158,14 @@
"kernel_addr=0x80000\0" \
"fdt_addr=0x7000000\0" \
"fdt_high=0x10000000\0" \
- "sdboot=mmcinfo && load mmc 0:0 $fdt_addr system.dtb && " \
- "load mmc 0:0 $kernel_addr Image && booti $kernel_addr - $fdt_addr\0" \
+ "kernel_size=0x2000000\0" \
+ "fdt_size=0x80000\0" \
+ "sdbootdev=0\0"\
+ "sdboot=mmc dev $sdbootdev && mmcinfo && load mmc $sdbootdev:$partid $fdt_addr system.dtb && " \
+ "load mmc $sdbootdev:$partid $kernel_addr Image && " \
+ "booti $kernel_addr - $fdt_addr\0" \
DFU_ALT_INFO
-#define CONFIG_BOOTARGS "setenv bootargs console=ttyPS0,${baudrate} " \
- "earlycon=cdns,mmio,0xff000000,${baudrate}n8"
#define CONFIG_PREBOOT "run bootargs"
#define CONFIG_BOOTCOMMAND "run $modeboot"
#define CONFIG_BOOTDELAY 5
@@ -189,7 +193,10 @@
# define CONFIG_MII
# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
# define CONFIG_PHY_MARVELL
+# define CONFIG_PHY_NATSEMI
# define CONFIG_PHY_TI
+# define CONFIG_PHY_GIGE
+# define PHY_ANEG_TIMEOUT 20000
#endif
/* I2C */
diff --git a/include/configs/xilinx_zynqmp_ep.h b/include/configs/xilinx_zynqmp_ep.h
index ec39211af3db5a9c605e2ec6fe26b253a4f593da..9906c426f50f05d135f64a70f1dd1e17c2e4c9e0 100644
--- a/include/configs/xilinx_zynqmp_ep.h
+++ b/include/configs/xilinx_zynqmp_ep.h
@@ -1,7 +1,5 @@
/*
- * Configuration for Xilinx ZynqMP emulation
- * platforms. See zynqmp-common.h for ZynqMP
- * common configs
+ * Configuration for Xilinx ZynqMP emulation platforms
*
* (C) Copyright 2014 - 2015 Xilinx, Inc.
* Michal Simek <michal.simek@xilinx.com>
@@ -17,6 +15,7 @@
#define CONFIG_ZYNQ_SDHCI0
#define CONFIG_ZYNQ_SDHCI_MAX_FREQ 52000000
+#define CONFIG_ZYNQ_SDHCI_MIN_FREQ (CONFIG_ZYNQ_SDHCI_MAX_FREQ << 9)
#define CONFIG_ZYNQ_I2C0
#define CONFIG_SYS_I2C_ZYNQ
#define CONFIG_ZYNQ_EEPROM
@@ -24,6 +23,13 @@
#define CONFIG_ZYNQMP_XHCI_LIST {ZYNQMP_USB0_XHCI_BASEADDR, \
ZYNQMP_USB1_XHCI_BASEADDR}
+/* Physical Memory Map */
+#define CONFIG_NR_DRAM_BANKS 1
+#define CONFIG_SYS_SDRAM_BASE 0
+#define CONFIG_SYS_SDRAM_SIZE 0x40000000
+
+#define COUNTER_FREQUENCY 4000000
+
#include <configs/xilinx_zynqmp.h>
#endif /* __CONFIG_ZYNQMP_EP_H */
diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h
index 0ab60839b6cff73b392534b9baff64d9574c2e99..e8c3ef0c387222ad0c507a90451bd09ae68d058c 100644
--- a/include/configs/zynq-common.h
+++ b/include/configs/zynq-common.h
@@ -66,7 +66,6 @@
#ifdef CONFIG_ZYNQ_QSPI
# define CONFIG_SF_DEFAULT_SPEED 30000000
# define CONFIG_SPI_FLASH_ISSI
-# define CONFIG_SPI_FLASH_BAR
# define CONFIG_CMD_SF
#endif
diff --git a/include/fpga.h b/include/fpga.h
index e0d12981b283ea93f9e4ef9fcf66076e4cc5bbda..d768fb14171af5744b799e9e81f65e03ca95e6ab 100644
--- a/include/fpga.h
+++ b/include/fpga.h
@@ -46,6 +46,7 @@ typedef struct { /* typedef fpga_desc */
typedef enum {
BIT_FULL = 0,
BIT_PARTIAL,
+ BIT_NONE = 0xFF,
} bitstream_type;
/* root function definitions */
diff --git a/include/netdev.h b/include/netdev.h
index de74b9a534b10a91c53a57bb2aacf98b699c1d9e..244f23f93c366b5eb867a2d2364706c34cf871dd 100644
--- a/include/netdev.h
+++ b/include/netdev.h
@@ -80,11 +80,6 @@ int tsi108_eth_initialize(bd_t *bis);
int uec_standard_init(bd_t *bis);
int uli526x_initialize(bd_t *bis);
int armada100_fec_register(unsigned long base_addr);
-int xilinx_axiemac_initialize(bd_t *bis, unsigned long base_addr,
- unsigned long dma_addr);
-int xilinx_emaclite_of_init(const void *blob);
-int xilinx_emaclite_initialize(bd_t *bis, unsigned long base_addr,
- int txpp, int rxpp);
int xilinx_ll_temac_eth_init(bd_t *bis, unsigned long base_addr, int flags,
unsigned long ctrl_addr);
/*