diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig
index 5c3b9320001693cd427a86e38873123bf62b5ba4..b2beea07e08e35a47096f2901d3842a5ea2a3158 100644
--- a/board/sunxi/Kconfig
+++ b/board/sunxi/Kconfig
@@ -197,4 +197,18 @@ config MMC_SUNXI_SLOT_EXTRA
slot or emmc on mmc1 - mmc3. Setting this to 1, 2 or 3 will enable
support for this.
+config USB1_VBUS_PIN
+ string "Vbus enable pin for usb1 (ehci0)"
+ default "PH6" if MACH_SUN4I || MACH_SUN7I
+ ---help---
+ Set the Vbus enable pin for usb1 (ehci0, usb0 is the otg). This takes
+ a string in the format understood by sunxi_name_to_gpio, e.g.
+ PH1 for pin 1 of port H.
+
+config USB2_VBUS_PIN
+ string "Vbus enable pin for usb2 (ehci1)"
+ default "PH3" if MACH_SUN4I || MACH_SUN7I
+ ---help---
+ See USB1_VBUS_PIN help text.
+
endif
diff --git a/configs/A10s-OLinuXino-M_defconfig b/configs/A10s-OLinuXino-M_defconfig
index 64756755bf9f2e234c353895e2e54d2db43bf389..94fafa6b97c2edfdab573279fcf877f7df385648 100644
--- a/configs/A10s-OLinuXino-M_defconfig
+++ b/configs/A10s-OLinuXino-M_defconfig
@@ -1,7 +1,8 @@
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="AXP152_POWER,SUNXI_EMAC,USB_EHCI,SUNXI_USB_VBUS0_GPIO=SUNXI_GPB(10)"
+CONFIG_SYS_EXTRA_OPTIONS="AXP152_POWER,SUNXI_EMAC,USB_EHCI"
CONFIG_FDTFILE="sun5i-a10s-olinuxino-micro.dtb"
CONFIG_MMC_SUNXI_SLOT_EXTRA=1
+CONFIG_USB1_VBUS_PIN="PB10"
+S:CONFIG_MMC0_CD_PIN="PG1"
+S:CONFIG_MMC1_CD_PIN="PG13"
+S:CONFIG_ARM=y
diff --git a/configs/A13-OLinuXinoM_defconfig b/configs/A13-OLinuXinoM_defconfig
index d8b12391d86bbca666e202284e9d4625bc993e49..8517203613327389ecc9b75557dc19def929889e 100644
--- a/configs/A13-OLinuXinoM_defconfig
+++ b/configs/A13-OLinuXinoM_defconfig
@@ -1,6 +1,7 @@
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2,USB_EHCI,SUNXI_USB_VBUS0_GPIO=SUNXI_GPG(11)"
+CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2,USB_EHCI"
CONFIG_FDTFILE="sun5i-a13-olinuxino-micro.dtb"
+CONFIG_USB1_VBUS_PIN="PG11"
+S:CONFIG_ARM=y
+S:CONFIG_ARCH_SUNXI=y
+S:CONFIG_MACH_SUN5I=y
diff --git a/configs/A13-OLinuXino_defconfig b/configs/A13-OLinuXino_defconfig
index 91039dfc9691cc65d065bff557e1255294b7b542..61f54666c24eb6608172380f329cf23ff9a0850b 100644
--- a/configs/A13-OLinuXino_defconfig
+++ b/configs/A13-OLinuXino_defconfig
@@ -1,6 +1,7 @@
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2,AXP209_POWER,USB_EHCI,SUNXI_USB_VBUS0_GPIO=SUNXI_GPG(11)"
+CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2,AXP209_POWER,USB_EHCI"
CONFIG_FDTFILE="sun5i-a13-olinuxino.dtb"
+CONFIG_USB1_VBUS_PIN="PG11"
+S:CONFIG_ARM=y
+S:CONFIG_ARCH_SUNXI=y
+S:CONFIG_MACH_SUN5I=y
diff --git a/configs/Auxtek-T004_defconfig b/configs/Auxtek-T004_defconfig
index 5b06ea0aeada7f2feaa3092cdce84b3d21071439..7fe9059179eb88116caa659e9033a221316a1029 100644
--- a/configs/Auxtek-T004_defconfig
+++ b/configs/Auxtek-T004_defconfig
@@ -1,6 +1,7 @@
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="AXP152_POWER,USB_EHCI,SUNXI_USB_VBUS0_GPIO=SUNXI_GPG(13)"
+CONFIG_SYS_EXTRA_OPTIONS="AXP152_POWER,USB_EHCI"
CONFIG_FDTFILE="sun5i-a10s-auxtek-t004.dtb"
+CONFIG_USB1_VBUS_PIN="PG13"
+S:CONFIG_ARM=y
+S:CONFIG_ARCH_SUNXI=y
+S:CONFIG_MACH_SUN5I=y
diff --git a/configs/ba10_tv_box_defconfig b/configs/ba10_tv_box_defconfig
index 0a1abea0a8d434fd4ab05ce8b9b3e0c3d5bbf3d1..6ca7c57186af556755b8293dbab6640ce3a30933 100644
--- a/configs/ba10_tv_box_defconfig
+++ b/configs/ba10_tv_box_defconfig
@@ -1,6 +1,7 @@
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC,USB_EHCI,SUNXI_USB_VBUS1_GPIO=SUNXI_GPH(12)"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC,USB_EHCI"
CONFIG_FDTFILE="sun4i-a10-ba10-tvbox.dtb"
+CONFIG_USB1_VBUS_PIN="PH12"
+S:CONFIG_ARM=y
+S:CONFIG_ARCH_SUNXI=y
+S:CONFIG_MACH_SUN4I=y
diff --git a/configs/r7-tv-dongle_defconfig b/configs/r7-tv-dongle_defconfig
index 7dbff40b508c776f3db7f32aa1fe2fe50c1f651e..b9fd59c16a70aafcebbe64e44218c83e65758356 100644
--- a/configs/r7-tv-dongle_defconfig
+++ b/configs/r7-tv-dongle_defconfig
@@ -1,6 +1,7 @@
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="AXP152_POWER,USB_EHCI,SUNXI_USB_VBUS0_GPIO=SUNXI_GPG(13)"
+CONFIG_SYS_EXTRA_OPTIONS="AXP152_POWER,USB_EHCI"
CONFIG_FDTFILE="sun5i-a10s-r7-tv-dongle.dtb"
+CONFIG_USB1_VBUS_PIN="PG13"
+S:CONFIG_ARM=y
+S:CONFIG_ARCH_SUNXI=y
+S:CONFIG_MACH_SUN5I=y
diff --git a/drivers/usb/host/ehci-sunxi.c b/drivers/usb/host/ehci-sunxi.c
index 4befd574541d74ce7ab7651360cb9c654e0bc452..193ac433c1d575ac44e7981968f07e81c3656976 100644
--- a/drivers/usb/host/ehci-sunxi.c
+++ b/drivers/usb/host/ehci-sunxi.c
@@ -39,7 +39,6 @@ static struct sunxi_ehci_hcd {
{
.usb_rst_mask = CCM_USB_CTRL_PHY1_RST,
.ahb_clk_mask = 1 << AHB_GATE_OFFSET_USB_EHCI0,
- .gpio_vbus = CONFIG_SUNXI_USB_VBUS0_GPIO,
.csr = (void *)SUNXI_USB_CSR,
.irq = 39,
.id = 1,
@@ -48,7 +47,6 @@ static struct sunxi_ehci_hcd {
{
.usb_rst_mask = CCM_USB_CTRL_PHY2_RST,
.ahb_clk_mask = 1 << AHB_GATE_OFFSET_USB_EHCI1,
- .gpio_vbus = CONFIG_SUNXI_USB_VBUS1_GPIO,
.csr = (void *)SUNXI_USB_CSR,
.irq = 40,
.id = 2,
@@ -68,6 +66,15 @@ static void *get_io_base(int hcd_id)
return NULL;
}
+static int get_vbus_gpio(int hcd_id)
+{
+ switch (hcd_id) {
+ case 1: return sunxi_name_to_gpio(CONFIG_USB1_VBUS_PIN);
+ case 2: return sunxi_name_to_gpio(CONFIG_USB2_VBUS_PIN);
+ }
+ return -1;
+}
+
static void usb_phy_write(struct sunxi_ehci_hcd *sunxi_ehci, int addr,
int data, int len)
{
@@ -143,14 +150,16 @@ static void sunxi_ehci_enable(struct sunxi_ehci_hcd *sunxi_ehci)
sunxi_usb_passby(sunxi_ehci, SUNXI_USB_PASSBY_EN);
- gpio_direction_output(sunxi_ehci->gpio_vbus, 1);
+ if (sunxi_ehci->gpio_vbus != -1)
+ gpio_direction_output(sunxi_ehci->gpio_vbus, 1);
}
static void sunxi_ehci_disable(struct sunxi_ehci_hcd *sunxi_ehci)
{
struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
- gpio_direction_output(sunxi_ehci->gpio_vbus, 0);
+ if (sunxi_ehci->gpio_vbus != -1)
+ gpio_direction_output(sunxi_ehci->gpio_vbus, 0);
sunxi_usb_passby(sunxi_ehci, !SUNXI_USB_PASSBY_EN);
@@ -165,13 +174,17 @@ int ehci_hcd_init(int index, enum usb_init_type init, struct ehci_hccr **hccr,
struct sunxi_ehci_hcd *sunxi_ehci = &sunxi_echi_hcd[index];
int err;
+ sunxi_ehci->gpio_vbus = get_vbus_gpio(sunxi_ehci->id);
+
/* enable common PHY only once */
if (index == 0)
setbits_le32(&ccm->usb_clk_cfg, CCM_USB_CTRL_PHYGATE);
- err = gpio_request(sunxi_ehci->gpio_vbus, "ehci_vbus");
- if (err)
- return err;
+ if (sunxi_ehci->gpio_vbus != -1) {
+ err = gpio_request(sunxi_ehci->gpio_vbus, "ehci_vbus");
+ if (err)
+ return err;
+ }
sunxi_ehci_enable(sunxi_ehci);
@@ -197,9 +210,11 @@ int ehci_hcd_stop(int index)
sunxi_ehci_disable(sunxi_ehci);
- err = gpio_free(sunxi_ehci->gpio_vbus);
- if (err)
- return err;
+ if (sunxi_ehci->gpio_vbus != -1) {
+ err = gpio_free(sunxi_ehci->gpio_vbus);
+ if (err)
+ return err;
+ }
/* disable common PHY only once, for the last enabled hcd */
if (enabled_hcd_count == 1)
diff --git a/include/configs/sun4i.h b/include/configs/sun4i.h
index e0ec52dcde7fb7c296c5a92acca7a5bc4ab062c4..7b857405e9e7839a27a7905b136a5677ec535b08 100644
--- a/include/configs/sun4i.h
+++ b/include/configs/sun4i.h
@@ -18,14 +18,7 @@
#ifdef CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_SUNXI
-
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
-#ifndef CONFIG_SUNXI_USB_VBUS0_GPIO
-#define CONFIG_SUNXI_USB_VBUS0_GPIO SUNXI_GPH(6)
-#endif
-#ifndef CONFIG_SUNXI_USB_VBUS1_GPIO
-#define CONFIG_SUNXI_USB_VBUS1_GPIO SUNXI_GPH(3)
-#endif
#endif
/*
diff --git a/include/configs/sun7i.h b/include/configs/sun7i.h
index 0193826a9dd404938f815487cb982a9f9ac01e8e..ea407903229adcfcaddb34b67313f7f7f80a5f7d 100644
--- a/include/configs/sun7i.h
+++ b/include/configs/sun7i.h
@@ -19,14 +19,7 @@
#ifdef CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_SUNXI
-
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
-#ifndef CONFIG_SUNXI_USB_VBUS0_GPIO
-#define CONFIG_SUNXI_USB_VBUS0_GPIO SUNXI_GPH(6)
-#endif
-#ifndef CONFIG_SUNXI_USB_VBUS1_GPIO
-#define CONFIG_SUNXI_USB_VBUS1_GPIO SUNXI_GPH(3)
-#endif
#endif
#define CONFIG_ARMV7_VIRT 1